Michael Posted September 10, 2021 Posted September 10, 2021 (edited) HKS Surge tank ** the new product was originally crystal-painted, but the paint has stopped after many years. It looks cool as it is, but I think it's okay to paint it with crystals to make it beautiful. Nismo Solex is attached to the image, but the exhibition is only for the surge tank. Please be careful. ** May just be the tank? still cheap. https://page.auctions.yahoo.co.jp/jp/auction/n1004080359 Edited September 10, 2021 by Michael gav240z 1 Quote
Administrators gav240z Posted October 12, 2021 Administrators Posted October 12, 2021 Big Job Lot on 2 rare / hard to find items for restorations. Early S30Z ashtrays https://www.ebay.com/itm/334177088780 5 good, 2 broken. US $4,850.00 AM Radios 4 total https://www.ebay.com/itm/334177117536 US $12,500.00 GTI-Z 1 Quote
Administrators gav240z Posted October 16, 2021 Administrators Posted October 16, 2021 Pair of D Caps. https://www.ebay.com/itm/194439691519 Current bid: US $610.00 with 5 days to go. Quote
Administrators gav240z Posted October 29, 2021 Administrators Posted October 29, 2021 Anyone want to start mass producing Triple SU manifolds for L-series? https://www.gumtree.com.au/s-ad/centenary-heights/engine-engine-parts-transmission/260z-3-carby-manifolld-casting-patterns/1283867147?ea=11034243&utm_source=trigger&utm_medium=email&utm_campaign=saved_search Quote
AndBir Posted December 4, 2021 Posted December 4, 2021 Seems cheap - off loading stock or is quality/fitment not good? https://www.ebay.com.au/itm/133370434755?hash=item1f0d7f54c3:g:53YAAOSwFLReeu-U Quote
gilltech Posted December 4, 2021 Posted December 4, 2021 One needs to check the tip-to-tip dimensions against one's own Nissan original. I bought one several years ago as my original, which has already been re-chromed once, has rust breaking out in places. However, I found the new one was too tight across the bodywork at each end, so didn't proceed and it still hangs on the garage wall to this day. Nothing to say that my car is correct of course, that the guards shouldn't be pulled in a bit, although I think its original bumper fits pretty well. I must look at it again though, thanks for the reminder. Quote
gilltech Posted January 8, 2022 Posted January 8, 2022 Well finally found time to again test fit the repro front bumper I bought a few yrs back. It came with holes for fitting the rubber strips and over-riders. I bought all new rubber strips at the same time. Its tip to tip inside dimension is 1503mm, whereas my original is 10mm wider. On my initial test fit I had been concerned it was too tight and so had set it aside for another day. This time around, however, after applying lots of protective tape and very gently pushing the panels inwards just a little at the valance/sugar scoop bolt-up joint lines (on my car they tend to bulge there slightly) to gain a few precious mm, I found the new bumper slotted into place better than I'd expected. (It's still too close to the bodywork on the RH end, some more careful massage work is required there. LH end is fine now). My original bumper has no doubt taken its share of knocks, and has already been re-chromed, so who knows how 'true' it is. Years ago the number plate and its brackets had been bent inwards, and my bending the brackets back into place - rather crudely - had stressed the metal and the chrome had crazed so that is why rust has developed. My bad. But the new one is now on to stay! Am quite happy with the result. It wasn't a plug'n'play in my case, took time due to the vagaries of my particular car. I had to slot some of the holes for the fixing bolts of the rubber strips so they would comfortably fit without stress around the curves. (Maybe the rubber had shrunk while sitting in storage). I also slotted the holes for the over-riders so they could adjust to line up better. The bumper came with an extra pair of holes top and bottom and inward of the over-riders, for bumper-mounted turn indicators I presume. Redundant in my case, I will source some chrome blanking plugs. Before its final fit I also painted the back of the new one with a generous coating of silver cold galv to keep it good. My 2c worth FWIW. RunawaySloth and 240ZBUILTBYME 2 Quote
Administrators gav240z Posted January 9, 2022 Administrators Posted January 9, 2022 Set of Z Caps. https://www.ebay.com/itm/363681064244 Price: US $2,000.00 buy it now. You are bidding on a set of four Datsun Z hubcap. Three (3) hubcaps are NOS, & one (1) hubcap is a very early take off. Chrome is as new. Center emblem is as new. Paint shows minor scratches. Very nice. Super rare find. If you have any questions please call Kurt. Quote
road rider Posted February 14, 2022 Posted February 14, 2022 E30(240K) cylinder head. $550 Datsun L24 L28 cylinder head 240z 260z | Engine, Engine Parts & Transmission | Gumtree Australia Brisbane South West - Woolloongabba | 1289816863 Quote
Administrators gav240z Posted February 15, 2022 Administrators Posted February 15, 2022 Hang onto your Mikuni 44s folks.. https://bringatrailer.com/listing/complete-mikuni-44phh-triple-carb-setup/ SOLD FOR $6,666 USD ON 2/14/22 Approx. $9,344.47 AUD. Don't forget import duties such as GST and shipping on top! Ponyo240z, 260z blues, theremm and 1 other 2 1 1 Quote
AndBir Posted April 25, 2022 Posted April 25, 2022 For that period look ? https://www.ebay.com.au/itm/255505302263?hash=item3b7d4d82f7:g:ZZ4AAOSwhjRiZfEK&frcectupt=true Fitting kits show up at the bottom of the ebay advert. gav240z 1 Quote
Oliphips Posted April 27, 2022 Posted April 27, 2022 On 4/25/2022 at 4:52 PM, AndBir said: For that period look ? https://www.ebay.com.au/itm/255505302263?hash=item3b7d4d82f7:g:ZZ4AAOSwhjRiZfEK&frcectupt=true Fitting kits show up at the bottom of the ebay advert. lol have two of these Quote
AndBir Posted May 7, 2022 Posted May 7, 2022 2+2 Rear bumper https://www.gumtree.com.au/s-ad/magill/auto-body-parts/datsun-260z-2-2-rear-bumper/1294796976 Quote
Administrators gav240z Posted June 28, 2022 Administrators Posted June 28, 2022 Set of D caps. https://www.ebay.com/itm/275359322158 Starting bid: US $1,800.00 Matching Topy's https://www.ebay.com/itm/275359337822?hash=item401cb20d5e:g:AY4AAOSwF7RiqkX8 Starting bid: US $2,250.00 3 of the wheels are dated 3/71. 1 is dated 2/71 Quote
Administrators gav240z Posted June 28, 2022 Administrators Posted June 28, 2022 https://www.ebay.com/itm/403732861291 AM radio (TM-1081ZB(S)) - Missing antenna switch. US $2,997.00 Quote
Administrators gav240z Posted June 28, 2022 Administrators Posted June 28, 2022 RE: D Cap prices, a few completed listings. Single early cap (less fingers/tabs on back) for $536 USD https://www.ebay.com/itm/225039901444 Another single early cap for $500 USD. https://www.ebay.com/itm/295026991311 And this set of D caps (NOS) was listed at $6,000 USD + no idea if they sold. (eBay says so) https://www.ebay.com/itm/325140039226 cracker 1 Quote
240Z_au Posted December 2, 2022 Posted December 2, 2022 Selling another set of my Mikuni 44's https://www.ebay.com.au/itm/175504175553 gav240z 1 Quote
csp-311 Posted December 2, 2022 Posted December 2, 2022 Nice! These 44's are the type 4's, with the external float adjustment. Nice to see a new set for reference, as I refurbish the PHH's. gav240z 1 Quote
Administrators gav240z Posted January 31, 2023 Administrators Posted January 31, 2023 Parts manual (LHD) https://www.trademe.co.nz/a/motors/car-parts-accessories/nissan/manuals/listing/3972598378 Quote
AndBir Posted June 23, 2023 Posted June 23, 2023 Triple Solex Mikuni PHH44 https://www.ebay.com.au/itm/266302975151?hash=item3e00e4ecaf:g:pP8AAOSwQItkjr1X 240ZBUILTBYME 1 Quote
OdinZ Posted June 27, 2023 Posted June 27, 2023 A facebook member shared this the other day. ARP Head studs from VPW (ebay Store) = $293.15 incl. shipping ARP Cylinder Head Stud, Pro-Series, 12-point Head, For Nissan/ Datsun, L24, L26, L28 series, 6-Cyl, Kit SKU: ARP-202-4206 (there's an eBay discount code you can apply to reduce the price from $318) https://www.ebay.com.au/itm/325650427232 Quote
Administrators gav240z Posted December 21, 2023 Administrators Posted December 21, 2023 2x AM Hitachi Radios https://www.ebay.com/itm/204587898795 Asking: US $2,250.00 https://www.ebay.com/itm/204587907360 Asking: US $1,880.00 The more pricey of the 2 has fully working signal seek, the less pricey 1 has an issue with a worn plastic gear that prevents the signal seek working as expected according to the seller. Quote Radio Condition: Radio has been fully tested and is fully functional with the exception of the auto seek / scan feature. The issue with that feature not working is because the plastic gear has worn out and is not engaging the auto seek gear. Quote
goldair Posted January 4, 2024 Posted January 4, 2024 On 12/21/2023 at 3:31 PM, gav240z said: 2x AM Hitachi Radios https://www.ebay.com/itm/204587898795 Asking: US $2,250.00 https://www.ebay.com/itm/204587907360 Asking: US $1,880.00 The more pricey of the 2 has fully working signal seek, the less pricey 1 has an issue with a worn plastic gear that prevents the signal seek working as expected according to the seller. Hi Gav! Just joined to ask— do you know the differences in font from the faceplate for the kHz? I've been asking around, but as of yet can't find an answer. Copying my observation from ClassicZCars, as it looks like the radios above have the smoother, more sans serif font: A more rounded sans serif font, as seen here, here and here (on the $310k BaT sale) A stenciled, almost "military" style block font, as seen here and here A link to my original post on this over at ClassicZCars: https://www.classiczcars.com/forums/topic/68754-hitachi-am-seek-radio-faceplate-font-differences-tm-1081zb/#comment-660650 Quote
Administrators gav240z Posted January 6, 2024 Administrators Posted January 6, 2024 I suspect it's the difference between OEM ones, vs reproduction ones available via 240zrubberparts https://www.240zrubberparts.com/product-page/70-71-am-radio-faceplate-complete The top 2 are reproductions I bought, the bottom 1 is an original (hence the chipped corner). Quote
mightymax Posted February 22, 2024 Posted February 22, 2024 Hi all, I've listed a few things on Ebay recently, check them out! https://www.ebay.com.au/usr/mightymax3791 I have a bunch of other parts including the following that will go up on Ebay in due time unless someone wants to buy them beforehand: - Fibreglass front guards - Front Seats - Tailshaft - Gauges - L26 - Front Bumper - Radiator - Spare Alloy Wheel - Original Hitachi Radio - Radio shroud/ air vent piece - 260z Badges PM me for more details if interested. Thanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.