AndBir

Not a problem, a great explanation so no need for a photo - thanks.. Is the tubing you are using rated for fuel/oil as I understand that can be a requirement depending on how finicky the inspector is?

Looks great, I am looking to go down the same route regarding the PCV --> Catch Can --> Intake. Out of interest, how did you secure the brass elbow inside the K&N filter cover? And presuming it is a nut of some kind, how have you secured it to prevent it working loose over time? Thanks, Andrew.

Buckley & Nunn

Anyone in Sydney to inspect and put an offer in for you ? : https://www.gumtree.com.au/s-ad/potts-point/cars-vans-utes/datsun-240z-thursday-is-the-only-viewing-time-/1254110088

Here you go, BE QUICK, given the circumstances a reasonable offer may get it for you : https://www.gumtree.com.au/s-ad/potts-point/cars-vans-utes/datsun-240z-thursday-is-the-only-viewing-time-/1254110088

Datsun 240Z https://www.gumtree.com.au/s-ad/potts-point/cars-vans-utes/datsun-240z-thursday-is-the-only-viewing-time-/1254110088 Potts Point, NSW Selling for a friend whose husband passed away. Make an offer. The car has been sitting for at least 10 years. Before this it was registered and driving here in NSW. The car has all it's panels and lots of extra parts. Rust in the panels as per the photos. Has been sitting undercover. The engine turns manually. Message or call me asap if you want to have a look as Thursday (tomorrow) I will sell it. I'll be there all day and afternoon. Contact me for the address. I did post this ad before but for some reason gumtree took it down?

The rear of the yellow rendered image seems a bit more retro - 300zx maybe

Interested to know what emulsion tube and jet number(s) etc. the Webers have been set up with - can you let us know?

Be aware that the throttle linkage on the Harada intake manifold can interfere with the attachment of the brake booster vacuum line onto the manifold. Get Les to check this as otherwise you will need to put in an elbow fitting out of the manifold.

Thanks for the link, I dare not even start tinkering with mine other than the idle mixture screw setting. Looking at Part2, and how so many components interact with each other, one can see why fuel injection is an attractive option!

Well that is certainly some very nice "dabbling" Well done as your work looks very professional!!

Something like this but with the washer having a flat spot to allow proper fitment;

These maybe look better quality than the autoaer : http://www.mycarperformance.com.au/index.php/air-ducting-filters/air-ductings Also on eBay : https://www.ebay.com.au/itm/Silicone-2-Ply-Black-Air-Ducting-Flexible-Air-Duct-Cold-Hot-Air-Wire-Helix-/263383343330?var=&hash=item82f14a1e5e

Expensive but hard to find : https://www.ebay.com/itm/DATSUN-260Z-280Z-AC-Air-Conditioning-Dash-Unit/174336414374?hash=item28974292a6:g:TAIAAOSwWkFcslzh

https://autoaer.com.au/collections/types?q=A%2FC Flexible Ducting

Is a collision safety cut out switch (inertia activated) recommended for electric fuel pump installations?

Interesting to see what this Falcon goes for? https://www.drive.com.au/news/barn-find-ford-falcon-xa-gt-rpo-83-chicken-coupe-could-sell-at-auction-for-200-000-123950.html?trackLink=SMH1

Just confirm that they are not the British SU carbs ( I think they are) before you buy any service kits etc.

Certainly looks OK and if the rust is just as you described then it will definitely be salvageable. A great father-son project

You have not driven over a pothole or gutter recently?

You may find going with a 260Z switch(es) easier and then have an auto electrician modify the underdash wiring to suit. Are you going to install H4 halogen headlights in place of the sealed beam originals?

The switching mechanism of the 260 is very different (simpler) to that of the 240 as AFAIK the 260 used an under dash relay.

Maybe you have just found a spare that the previous owner tucked away inside the car?

Get together with Hayden, he buys the white one, you get the red one from this seller : https://www.gumtree.com.au/s-ad/girraween/auto-body-parts/datsun-260z-2-seater-project-panels-donor-car/1231715989

Maybe negotiate with this seller : https://www.gumtree.com.au/s-ad/girraween/auto-body-parts/datsun-260z-2-seater-project-panels-donor-car/1231715989