Jump to content

nat0_240_chevZ

Members
  • Posts

    864
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by nat0_240_chevZ

  1. electro mould, a-class metalfinishers and AI automotive.... E-coat, is just an electo-version of phoritic coatic (phosphate), to help speed it up and to electrically bond the coating, not just dip it. already done a bit of re-search, current way of manufacture. nat0
  2. GREAT VID, "HONEY, JUST GOING TO THE DELI TO GET SOME MILK........ SPLATT"
  3. Also reccomend Adam @ Uni-Metal cleaners, just done my 240z shell, and all panels. panels went ther nice and straight, and thats the way they came back, I got him to blast in and out and etch prime in watyll super etch (the best and their preferred.) am taking my second shell back there and a whole bunch of other gear, as soon as i get the time. nat0
  4. need sills or seat rails made? nat0
  5. i just need a photo of one which is nice and square to the part, and a nominal langth and height dimension and I can draw them up, I have 12mm thick self adhesive foam/rubber matt here i can cut from too. nat0
  6. what are you putting in the car, ie what sort of mods would need to be approved? ie mounts, crossmember, suspension brakes etc etc. nat0
  7. check out the bonnet lifting up in the middle,..... awesome vid, how fast do you think you were punching in the straights?? nat0
  8. send me the file and ill laser them up for yas, at least that way you's and woza can rest assured quality is mantained to a top notch level. I have CAD data for the rear brake mounting and my own brackets etc, but I can cut bend mill drill anything you want. nat0
  9. get the quaif, some of the best diffs ever built. you will need to remove diff to ensure you have everything correct before splashing cash. 260z r200's have 10mm crownwheel bolts (provided it IS a 260z diff) have 29 spline output gears / side gears. but check check and check again before splashing cash, nat0
  10. 153624, sounds like a song in your head when youve had to repeat it a thousand times. call it 'nissan symphony' of an inline 6
  11. ha ha, will need three hands not running front diff??
  12. will the doors on your trap-door setup clash with thte pickup inside the surge-box? ie not open enough to transer oil through during no acc/dec? i understand they are to be opne or partially open most of the time but will they perform like your anticipating if the hit the oil pickup strainer?? just a thought, Ive been meaning to get back on the computer and post her, but been way too busy. keep us updated. Nat0
  13. does my camms approval SOLD get them before PM sent?? nat0
  14. am not able to believe they have not sold already..... id take these overs webbers, if I had an L series motor anywhere... nat0
  15. do they come with CAMS approved harness bolts? if so sold...... nat0
  16. how much for the Rad support? is there any sound metal left near the battery tray? nat0
  17. may be easier for others in trying this, to cut the s30 strut tube off at the lower casting, machine up some round bar approx 150-200mm long , 2 holes (1 is a slot) and 2 flats eitherside to suit the rexe style knuckle clamps, holes and flats suit the strut clamps, and you can keep Z steering, but now achieve lots of camber without interference of tyre to strut, due to the ecentricity / offset of strut tube to the ball joint pivot, so easy and yet so overlooked. oh and very little fab req'd, just weld in the bar inserts..... nat0
  18. IVE GOT THE MOUNTS.....
  19. yup, use a similar one now, single spot, wire lines and washer or hooks too, all consumables but all money i dont have to pay to use it . nat0
  20. looks like a 'Rothenberger' copy..... how ma?? I Use the rothey alot, pins get expensive here in aus but, not too bad as i re-use them till their 20mm long..... nat0
  21. i got mounts in adelaide for ya....... get in touch if you want them, nat0
  22. are you using teplates or copying your shapes/detail etc. can knock them out on punch laser if you have or feel the urge to manufacture your own product..... good to see you taking it on, as most would even know where to start. nat0
  23. yea sort of, that foam fill is really there to keep the metal skins apart from each other, ie to resisit bending, does this best when the material in bending, one side is tryin to compress the other side stretch. foam is to stup the sheet meatal buckling and providing NO strength/resistance to bending. also helps to deaden sound. yea can make rails, extensions etc, Im making a new set for my 2nd 240z, as its got some nasty repairs, ala 5mm MS plates just slaped together. i will be doing fun length items for sake of it. nat0
  24. Yes like the 16x7 and 16x9's v4's on my car. Cost a pretty penny, but are worth it. Thoughts about selling for 5 stud change, but keep changing my mind........ Mmmm I take it these don't fit a Z then, by your comment re ' something that fits'..... Nat0
×
×
  • Create New...