Jump to content

Recommended Posts

Posted

 

At the recent driver training day at Sandown I used my phone to shoot some video of the Zed in action.

In it you will see my GPS speedo and the shift light.

This was the first session.

 

 

cheers,

Sinisha   

  • 5 weeks later...
Posted

two great vids!

redrbzed kicking arse and taking names...

 

and mental slide throttles on a L6

Don't know much about them,but I know someone who has some slide throttles off a BMW supertourer, apparently they are great for WOT circuit use but a bit of a pain everywhere else- might have just been the tune though.

 

  • 2 months later...
Posted

Have been playing with my GPS track data from my Trackmaster Android app, did an overlay of a lap on the previous video showing speed and position.

 

 

cheers,

Sinisha

  • Administrators
Posted

A bit bizarre but nice looking Z all the same.

 

  • Administrators
Posted

A cool looking Fairlady Z - Rocky Auto SHHHTYLLLEEEEE

 

 

I want these wheels on my FD RX-7.

  • 2 weeks later...
  • Administrators
Posted

Bob Bondurant Driving School video..

 

Has lots of early Datsun's and in particular shows the ZX.

 

  • Administrators
Posted

Just found this awesome video also:

 

Nissan R92CP & S30Z

 

  • Moderators
Posted

With only one run (as in 5-6 laps) best was a 2:01. Zed is a bit too soft for the track and needs more grip. Springs are F280lb and R300lb so will have to go back to coilovers and sectioned struts to lower it again.. What bothers me is I had all this stuff and sold it all. Now have to get it all installed again  >:(

  • Administrators
Posted

I love the sound of this thing, also it looks like one of the crossflow heads on this car that was mentioned in retro auto magazine?

 

http://www.youtube.com/user/sato1511

 

He also has a pretty cool website

 

http://sato1511.blog40.fc2.com/

 

That's the LY cross flow head. At least that's what it looks like.

Posted

The son made it for his dad, I think that's all the video sources they had. There was not much other incar taken that day was there?

  • 2 weeks later...
Posted

 

It's me again!

 

Did a sprint with the WRX group last Saturday at Sandown, some in car with GPS data of my best lap, a 1:19.89.

This time in HD.

 

 

cheers,

Sinisha

Posted

That's the LY cross flow head. At least that's what it looks like.

Well the build has does its job :D it is not an LY head ;) the spark plugs are on the incorrect side - that head is a RB20E/RB30E head that is custom modified to look like LY for a pic of real LY see here

 

http://www.pitroad-ts.com/tuning/L24R.jpg

 

That head has custom made intake, rocker cover, machined front and new front cover to support chain drive conversion, nice to have access to a foundry and $$ for creating such a head just for the look (performance is not great from these heads so you would not do it for performance)

 

see here for more info

 

http://www.viczcar.com/forum/index.php/topic,8760.0.html

 

Also another video of the engine/car is here

 

Posted

My mate Ricky's race from last weekend - in the wet.

 

 

The escort that passes him has new good wets and if the zed could run an engine out side of the rule like what is between the struts of that escort zeds would run RB34D (RB engines are the same vintage as the engine in that escort - but at least Nissan did sell and race DOHC S30 in  larger numbers than what this escort engine is meant to replicate - so you think we should be able to run RB's)

Posted

Great video's Guy's, here's an in-car from the hillclimb car...http://www.youtube.com/watch?NR=1&v=YBirIavBZKc Some of those Euro hillclimbs are epic and that Zed is Magic!!

 

Is that your mate with the 'small bore' Ld crank engine NZeder? your right that Escort is a Weapon, Love the Alan Mann Colours. What engine was it 'Replicating' and was that a Broadspeed mini in there as well?

Posted

Yes that is a Broadspeed mini.

Yes it is a small over bore L28 (now de-stoked to fit 100% in period correct engine build)

Holbay/Warrior but using YB Cossie head on a sort of pinto bottom end (sort of - as in not cast iron and more displacment than run in period :( ) so nothing like a Holbay really but he managed to get it through - god nows how.

 

So if a YB head is like a 16 valve Holbay head of the day then a RB engine is like a S20 engine which was FIA approved for the S30 chassis (and more to the point sold in a production car not a special like the holbay- now if the OS Giken TC24-B1 was FIA approved then that would be like a Holbay)- given a number of features of both engines ar the same. S20 = DOHC 16valve 6 cylinder, alloy head, cast block. RB = DOHC 16 valve 6 cylinder, alloy head, cast block - has same intake port spacing and exhaust spacing, blocks look sim in design aas does the RB26 head intake manifold - ie RB could be made to look like an S20 much like a YB can be made to look like a Holbay. But I bet we could not get that past.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...