Jump to content

nat0_240_chevZ

Members
  • Posts

    864
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by nat0_240_chevZ

  1. REMEMBER TO USE A PILOT BEARING/Spiggot bush!!!!!! for the manual box!!!
  2. mate i have driven my a friends car with kingy lows, etc it drove really well, had good shocks stock swaybars, but the lows are a softer rate than the std height kings, get the stds and cut untill its low enough for you, as the spring also gets stiffer when you start cutting coils, (just dont heat/overheat the coil!!!) I must say cause it was lower, the body roll was reduced, but the bushes i reckon should have been done to be fair in comparo, also the biggest problem it did have was 'BUMP STEER' get rid of this in any zed and it drives alot better. Maybe a 20% stiffer only front sway/antiroll bar would have helped too, but overal it stuck pretty well for what the car was, a stocker!!! drop me a line if you wanna chat, still got my number??? cheers nat0
  3. just do as he wants, hes the one signing off on liability so the f'g pigs can get fkd just vent the BOV back into pret turbo intake, ie airbox or pipe brfor turbo!!!, just swap it out for a factory style one or one which can have a pipe hooked up to the outlet!!! nat0
  4. NAME ISACC???
  5. nah, it really is magic!!!! really!!! yea big nut on each side on new c boxes, meant to help you not grab rev instead of 4th and 1st instead of 3rd. basically a spring on a plunger which operated on the lower part of the gearstick, below the pivot or ball socket in the new ones. nato
  6. bump steer causing the railroading, will ride and follow ruts especially when on uneven surface. re-located the lca pivot to help ease the sympton. otherwise get used to it. have you had a wheel align done since you replaced all bits n pieces??? nat0
  7. LURCH, I TOO HAVE JUST PICKED UP A NES RB25DET, I MIGHT PUT THE VH45 ASIDE FOR NOW SO I CAN GET MY CAR ON THE ROAD SOONER, AS ITS A PIECE OF PISS TO GETH THE RB ALL FIRED UP IN TH Z, shit sorry bout the caps, wish there was a select and smalasize the writing!!!! anyways, yea also going the rb route now sine i picked one up complete dirt cheap
  8. if it is the mazda colour, i know the name # code, just had to spray me ms' new car after repairs. Mazda, winning blue, also a ford colour code : 27B
  9. sometimes yes & sometimes NO, you can swap the tailshaft ends, just split the uni and swap flanges.....same way you replace a uni joint. no problems in advance. happy to help nat0
  10. looks about as fast as an l-series...... lots of lag and NO pull down low off boost!!!! not as impressive as some of the l31 builds i have seen, but a nice car none the less!
  11. I have an F54 block with P90 head already attached, an l28 for those that need the hint, has no inlet anything has an ex mani bolted to its, condition unknown but car was a write off (stat) in rear end so id say it was running a bit too well when hit!!!! have pics available, can get on a pallet to send via courier, will need to be able to lift off at your end!!! Has an auto attached to it, yay. in adelaide. open to offers cheers nathan '""'nbrown ""(at sign)"" kern.com.au"""'"""
  12. just scan & post in initial thread. it was in the paper, for public presentation, open source!!
  13. yes i believe that is so, but do believe also they are talking about a live/solid rear end not an IRS setup. but a youger chap at my work has also installed a VN lsd into his datsun sunny housing, with shortened axles!!!! most diffs can be done as such. What about a 3.54:1, very easy to get a hold of!!!!! straight in and then just LSD the thing with a late modelmechanical centre or Aftermarket like kaaz,cusco,quaif tomei? the 3.54 is not far off the 3.36 in real world terms, what are you running at present??? nat0
  14. ex japan, almost any ratio gear sets you could want in the long nose r200. about 2k from memory, trying to find the link now..... http://www.kameariengineworks.co.jp/catalogue-P48.pdf down bottom right of page, they used to have another page with prices next to the ratios. you can buy anything you want for the s30 from their main page http://www.kameariengineworks.co.jp/ from brakes to camber arms, strut bars, high ratio steering arms etc etc...... nat0
  15. also has an F54/P90 for sale, suit a rebuild, make a reasonable offer, and look after freight yourself. in adelaide cheers nat0
  16. as you can see they were 5.0" not 4.5 mythicals which 'were' available at some stage for usdm but were extremely short lived if at all, but the set you are looking at is definately a 70 model car which was almost dead stock and lots of rust to go with it!!! no problems in advance! nat0
  17. sorry was at lunch and had very lil time. see attached pics from early model 240z bog stocka!!!
  18. NOT 4.5''
  19. haha. remember, dusty first coat then heavier 2nd and heavy 3rd (if req'd) same with clear, not a sparaypainter but my mate is (a goodone at that) and have picked up alot, but when i want something 'primo' done gues who gets shafted!!! yep him, lol good work, nothing like learning yourself, nat0
  20. mmm thought xstrata was copper ore mining/refining??? had a big job enquiry from/for them recently, but damn copper is pricey, especially when elcto-deposition almost 100% PURE!!!! it seems they do look after their workers too, from what i gathered.... what is it you will be doing there, drawings? checks &/or drawing updates??? please elaborate, as i was too looking at one stage @ a mech engineering job up there a couple of years ago. decided not to as i enoy city living too much, but with housing affordability it seems the only way to get 'really' ahead!!! nat0
  21. http://s303.photobucket.com/albums/nn157/nat0vhZ/ have a looksy also http://forums.nicoclub.com/zerothread?id=338148 & http://forums.nicoclub.com/zerothread?id=340098
  22. shall do another time, heaps heaps busy @ work at present. so when im about to nod off one night ill put in a blurb, your list is pretty good for starters, would mix the order a lil, but all very good easy starting point. cheers nat0
  23. back off your tyre pressures, say around the 24-28 psi lay off on the shock & swaybar on the front (softer), add more front castor with shims and see how it goes (steering will get heavier, but bites on initial turn in more, also helps the inside of the tyre to) toe out will help the car load the front outer corner gradually, not snap & loose grip cant go a stray with camber, within in reasonable limits, keep an eye on tyre temos & wear patterns. Dont go widest tyre the rim can take as you only end up with profile 'roll' not cornering load on sidewalls. from personal exp., id stay away from the khumo's for trackwork or anything with high lateral loads as their sidewalls give way far too easily and you end up doing as you say stripping tread from the first groove out to the walls, try yokis, i havent yet had, seen heard any neg reports of them, however $$$ may or may not be a problem for you. Lurch, please feel free to add, shoot down in flames, and/or make any suggestions/comments. as remember we are talking about another racing bus driver here, (more up your alley than mine.) chers nat0
  24. i do have a spare rough cut of a 240z tray, yes you can run a smaller (slightly) bat in there as i have had my vh in there and there is room for one!!! nat0
  25. also they are output yolks!!!!!! or shafts splines depnding where in mehixo u from!!!!
×
×
  • Create New...