Jump to content

nat0_240_chevZ

Members
  • Posts

    864
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by nat0_240_chevZ

  1. try KTI transport. i used them to get my vh45 halfcut from qld to adel. got a ripper deal but front cut 1350, transport 300.... nat0
  2. Guys, have decided to sell to fund the Z some more (even more reason to buy it guys....) 1998 black GTT with tasteful mods ie only:- -18" rays/volk racing wheels in semi-slic's -fully adjustable coilovers, dampner, height etc. -3" turbo back ex, with titanium rear section, from cat back -new battery -new exedy HS clutch, (real heavy and rough if you like it that way like i do) -pioneer bluetooth, ipod USB deck with coak splits in rear, no amps. after 17.5k min, so up to you when it comes to $$$, may swap for a really good 240z also with cash towards me (car dependant of course) car is sub 90k, pics on trader website. call or sms me, or pm whatever.... 04O2 91O 431 website on trading post http://www.tradingpost.com.au/Automotive/Used-Cars/Sports-Performance-Cars/AdNumber=TP002694528?BackToResult=true
  3. dont try with the rusty musty brzi!!!
  4. ok, boys, settle, quoting something from previous here ""Don't be afraid to pick up an older unit if its from one of the good brands (Miller, Lincoln, Kemppi, Fronius, ESAB, BOC, and one or two others), as they will still weld smoother than a lot of the new cheapies."" what about a WIA??? i purchased one earlier this year, been using others cig transmigs that are clapped out and crap, because they are not looked after, I occasionally use wia cdt migs here when i need to. My wia mig is only a single phase cost me about $1650, new but dont tell anyone as its worth far more ie 2.5 k plus. WIA is made in australia (adelaide to be precise) and the reason they cost more is the quality of unit you do get, WIA is the australian counterpart of Miller anyhows. which i also have a miller tig / stick etc. It seems the thead went a bit off topic previously, with the gas / gasless debate, but yes gasless is an need to use basis, as mentioned above re: onsite in and sito's you just cant use get a bottle with you. NO welding is done at my work with a gasless mig NONE. and never will be unless called up for by customer or welding specs. Get yourself a unit that will do what you need to do plus more, you will never regret it. The mig i have purchased with 1.2mm wire (I only use 0.9mm for panel heavy etc etc its all about technigq regardless of unit.) with the 1.2mm wire i can single pase an 6-8mm fillet with extremely good pen'o. my unit is a 200amp unit (even though assured it is a 225amp bu the manufacturers themselves) I took the plunge to have a more workshop unit, but they make an awesome smaller one which is either 150 or 175 amp with or without trolley which has the same capacity as my workshop one but smaller wire spools. (if you wait both these models will be replaced with 1 unit with 185amps) I find i am able to weld metal thin as about 0.55mm together in butt form with small round to oval tacks untill they blend in with each other for panel work, but this is tricky even for me, and i am capable of welding with tig to this thickness also. BUT wia welders do cost a bit more than youre average chinese or other made. other units I recommend are kempiis and fronius' but to get these units tserviced or repaired they have to go interstate and parts are ex OS. WIA's are local and can be repaired here in adelaide or melborne and even NSW from memory. hope this helps with your decision, no more debate about the gas / gasless I beg you all!!!! cheers chevZ
  5. BLOODY MEXICANS!!! LOL
  6. brzi, if it comes to you dont get the money you want or decide you want to keep, i can look after it at my wkshop, once one of the r34s is on the road, hopefully monday next week!!!! fingers crossed.... nat0
  7. email me the model to look over, what formats can you offer it in?? cheers nat0
  8. i got pics on my wall at my workshop with a dett in an s30, with also an r33 subframe rearend. its inthere, but just, but you can do anything you like with enought time OR money?? hell my vh45 fits in my enginebay!!!!, and its just a bit longer than the z32 dett motor..... go for it, but be warned and or prepared. nat0
  9. i think its andrew??? bailey, not 100%, nice bloke, i think hes was chucking an ls1??? into it? will fly if it is. nat0
  10. there is an easy way to check too, reach your hand up under the guard and slide your fingers up and feel for the short or tall tops, just watch out for spider, redbacks especially as this is where they like to live nat0
  11. UPDATED URL ABOVE look at pg 3 of catalogue then look through the the rest and find suitable inserts if you can really be botherd to look nat0
  12. aslong as you have the mating 27 spl companion flange for it. but would suggest buying the other side also, to save you or future owners running into troubles lata on!!! nat0
  13. it give it some flavour of the 370z concept car the orange one, which has a bit of the r35 gtr touches bit still hot. if you were to make some moulds up i can sell one set, my mate is not yet a zed owner but if he could buy the kit like that concept car hes in, selling his skyline & s13, i would buy one too and setup a track car in a widebody. nato
  14. the z32 tt is much narrower than the z32 NA(which is the one i think you are refering to) due to all the intercooler piping, i also have a pwr dual 26mm core, picked it up on shevil bay for 660 a while ago now!!! but is pretty trick. the rodeo one sounds good, but also any other narrow rad that is ally core will be good, vertical side tanks or horizontal ones doesnt matter as long as the out/inlets are in roughly the same spot. i can get the the Z rad recored in a 3 row for 250-280$ with new cap and a 12 month waranty, 600 sounds steep!!!!! someones getting rich nato
  15. mmmmm, might have to also offer a darius build car, im sure there would be plenty of takers for his old or newly revampped 240z, with the vids still getting alot of attention on the tubes!!!!!!
  16. just replace, grab a z32 TT one, fits in easy or other similar one, make sure it has plastic tanks as they r then easy to change bits over for them.
  17. ill pass this on, as my understudy at work makes themfor wrx's evo's and other assorted cars, he makes oval/oblong tube alloy, and i have programmed the mounting brackets previously for my own. nat0 PS will let you all know what he comes back with.....& the $$$
  18. my r180 held up fine to my 283 chev, with a bit of work, had 20+ years in there and the only theing that the prev owner could remember breaking, is the rubber strap over the diff, the front mount and the moustache bar stud mount pin thing. nat0
  19. get in at 8am on thursday, short trip to hire car depot appearantly they have a shuttle!! let me know, if anyone is about?? will be there (brissie & goldcoast) till the 7th am nathan
  20. haha, yea, we'll see.
  21. FLY IN on the 26th with the miss' & her luggage!, me 1 bag!!!
  22. z31 strut inserts only fit the 260z strut, yes mr2 and other toyota (similar / same part #) fit. basically there are 4 types (main) that are similar in design available, i had posted ages ago about a cross refference chart i had posted from monroe. look into their product catalgues etc as the have diagrams and dimensions open, closed and shft and body lengths. from my research ages ago also i found that you can used shorter strut cartridges without sectioning the struts, as you use a cylinder type spacer ontop of the insert between the gland nut and strut body. but big enought to stay around the edge of the insert shaft as it could scratch it if loose etc. this is the easiest mod i feel and is suited to lowering the car if you use heavier spring rates as you dont need all that extra travel sectioning gives you back, i mean how often do you want to scrape the sump or croossmember on the ground. You still have about 1-1 & 3/4 inches of travel after lowering on the struts, so if racing or running stiffer springs i wouldnt even bother with the sectioning. If youre using for rally then this is a different story. I definatley still have the pdf's somewhere either here at work or at home. ill have a look anyways. nat0
  23. well im heading to brissy at end of feb if your keen!!!! need a lift to the hire car place about 10 mins??? away??? but what happens if you need more than one seat do we call lurch or craig or johnny (brzi). what about amount of luggage??? need a 2+2 chopped and an A fram welded to it to have a Z trailer also (but then also needs a Z with a tow bar, (which is sacrilage if you ask me,) upsets the balance, or if you had too many pies on the weekend is ok!!! nat0
  24. VERY!!!! nice car. kudos, yes it was $$$'ey but its worth every cent, you can spend alot in getting it back to that condition. provided its been done properly then yes money well spent. nat0
  25. or try an easier option, modify existing stub axles, its not hard, but DONT just redrill them and have 2 of the 5 studs with barely 2mm of steel holding them in!!! check out this post here: http://www.viczcar.com/forum/index.php/topic,546.15.html or pic here:- http://www.viczcar.com/forum/index.php?action=dlattach;topic=546.0;attach=516 they were 260z stubs i did, would do again for the 280zx z31 4 stud or whatever is req'd. nato
×
×
  • Create New...