Brabham Posted January 6, 2015 Posted January 6, 2015 http://page18.auctions.yahoo.co.jp/jp/auction/w115948789 Yowzers $2000 AU for an OEM choke set up for a 260z. Tell him he's dreaming! Quote
Administrators gav240z Posted January 6, 2015 Administrators Posted January 6, 2015 Tell him he's dreaming! Funny I saw another auction for the same part a week later and it only reached ~$200. Quote
George Posted January 15, 2015 Posted January 15, 2015 AU$550 for one tail light... http://www.ebay.com.au/itm/261727077056 Quote
Administrators gav240z Posted January 15, 2015 Administrators Posted January 15, 2015 AU$550 for one tail light... http://www.ebay.com.au/itm/261727077056 That is actually the going rate believe it or not? I see them on Yahoo! Auctions go for more than that sometimes. What I find funny is that 260z (280z or S31) rear lights aren't worth anything compared to the early style lights. At some point they will be just as rare and hard to find I'd imagine. Quote
pauly_adams Posted January 16, 2015 Posted January 16, 2015 i would have to agree with gav on that one, but now even the 260z and series 1 280zx lights are getting quite expensive Quote
oldmates260z Posted January 17, 2015 Posted January 17, 2015 Brand new tail lights: http://www.ebay.com.au/itm/Datsun-260Z-RH-rear-new-tail-light-NOS-/141540010167?pt=AU_Car_Parts_Accessories&hash=item20f47128b7 Quote
NickF Posted January 19, 2015 Posted January 19, 2015 Repro tail lights and bumpers Any good? http://r.ebay.com/sDVabC Quote
dat240z Posted January 19, 2015 Posted January 19, 2015 I got the rarespares 240z lights and I must say, theyre very very good. @ sets left! Quote
Administrators gav240z Posted January 19, 2015 Administrators Posted January 19, 2015 Repro tail lights and bumpers Any good? http://r.ebay.com/sDVabC @Nick. http://www.viczcar.com/forum/index.php/topic,14778.0.html If you can find a good second hand pair, you might be able to restore them to this level. http://www.viczcar.com/forum/index.php?topic=10094.0 Which is certainly worth the effort as NOS ones go for $1500 AU+ in Japan Quote
oldmates260z Posted January 24, 2015 Posted January 24, 2015 New dashboard? http://www.gumtree.com.au/s-ad/stirling/other-parts-accessories/nos-nissan-datsun-260z-dash-board/1068442453 Quote
Scoota G Posted January 28, 2015 Posted January 28, 2015 http://www.gumtree.com.au/s-ad/north-melbourne/other-parts-accessories/datsun-260z-240z-parts-lot-/1068940876 Guy has a few parts, discs, old 260 carbs, wiper cowl, springs and a console. Spoke to him today he wants $450 for the lot but was willing to seperate the console at $200. Quote
EvilZ Posted January 28, 2015 Posted January 28, 2015 Is gumtree for you guys like craigslist is for me in the US? Looks like a bunch of nice parts pop up on that site. Quote
andyk_79 Posted January 28, 2015 Posted January 28, 2015 Is gumtree for you guys like craigslist is for me in the US? Looks like a bunch of nice parts pop up on that site. Similar concept - classified ads site. Was its own beast but was purchased by eBay a few years back. Quote
bryan3976 Posted January 28, 2015 Posted January 28, 2015 http://www.ebay.com.au/itm/150952452051?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 e12-80 replacement modules for $80 Quote
EvilZ Posted January 28, 2015 Posted January 28, 2015 Similar concept - classified ads site. Was its own beast but was purchased by eBay a few years back. Thanks for that info, I will need to start searching there too. Quote
Administrators gav240z Posted February 3, 2015 Administrators Posted February 3, 2015 More OEM madness. http://page7.auctions.yahoo.co.jp/jp/auction/g141913750 Part no. 27400-E4100 Went for over $1000 AUD. If you need it, you need it! Quote
Administrators gav240z Posted February 11, 2015 Administrators Posted February 11, 2015 http://www.ebay.com.au/itm/271768831315 N42 engine head. Quote
Administrators gav240z Posted February 17, 2015 Administrators Posted February 17, 2015 http://www.gumtree.com.au/s-ad/adelaide-region/wheels-tyres-rims/performance-challengers-15x8-9/1071062214 Performance challengers, not sure if they would fit a stock Z? Quote
phillay Posted February 17, 2015 Posted February 17, 2015 http://www.gumtree.com.au/s-ad/adelaide-region/wheels-tyres-rims/performance-challengers-15x8-9/1071062214 Performance challengers, not sure if they would fit a stock Z? 4 X 110 pcd thought, I think that's early toyota ke20s pattern? Quote
Administrators gav240z Posted February 17, 2015 Administrators Posted February 17, 2015 Ahh sorry, 114.3 is the S30z right? I always forget. Quote
Administrators gav240z Posted February 18, 2015 Administrators Posted February 18, 2015 PS30-SB fuel gauge (100L vs standard 60L). http://page4.auctions.yahoo.co.jp/jp/auction/d160469242 A little pricey, yes it's rare, but couldn't you just paint 100L on a standard early gauge and recalibrate it? More info on Alan's 432-R replica page. http://www.gtr.co.uk/forum/236658-1969-nissan-s20-twin-cam-engine-rebuild-7.html Specific post: http://www.gtr.co.uk/forum/2519777-post95.html I like the metric oil pressure gauge though! Quote
oldmates260z Posted February 20, 2015 Posted February 20, 2015 For you Victorians http://www.ebay.com.au/itm/VIC-Number-Plates-ZEDMAN-240Z-260Z-350Z-370Z-Nissan-/301532980830?pt=LH_DefaultDomain_15&hash=item4634c4265e Quote
Moderators PB260Z Posted February 20, 2015 Moderators Posted February 20, 2015 For you Victorians http://www.ebay.com.au/itm/VIC-Number-Plates-ZEDMAN-240Z-260Z-350Z-370Z-Nissan-/301532980830?pt=LH_DefaultDomain_15&hash=item4634c4265e Dimitri ?? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.