CBR Jeff

No I didn’t and it would be greatly appreciated if you do have one. Jeff

This is a handy site if you want to look at different wheel tire combinations. https://www.wheel-size.com Jeff

Thanks Andy. Of course they are. Well I just need one of them them. Jeff

I need the top corner trim for the drivers side of the windscreen. Just the corner. Hopefully some one has one they don’t want or an extra one they don’t need. Jeff

Nice work Locky. Jeff

Some of the other projects over the last few months have been. Renewing the rear luggage straps, making a new roof lining from some 5mm foam and black vinyl. Making all new roof and pillar vinyls and gluing them in as well repairing and repainting the interior plastic components and installing them. Jeff

PM sent about the wiper motor Thanks Jeff

New Door Cards I decided to make my own new door cards. I removed the original Masonite off the top metal section and replaced with new Masonite. then covered the entire card with black vinyl. The old armrests I had were toast so I replaced one end with a webbing pull and inserted a bolt into the other end that helps hold the card in place but can be used to secure an armrest later. I used the fluffy side of Velcro to replace the window runner section along the length of the door card top. It was a bit of stuffing around but they look the part. Not perfectly original but period. Jeff

It’s been quite some time since an update. Unfortunately personally it’s been a tough 9 months. We lost me old mate Rocky and I managed to make a total hash of my shoulder in September and turned my left arm into a useless appendage. I couldn’t drive a manual car because I could not control my arm to change gears. So it was off for a full shoulder reconstruction and a long and painfully recovery. 12 weeks in a sling and lots of Physio. Luckily it’s almost back to normal now so happy days. During recovery I have continued to get small light jobs done as possible but I have been very slack when it comes to updating the build thread. mover the next few days I’ll post some photos and words about progress. Thanks to the members who reached out during this time to check on me and ask RUOK. Much appreciated. Jeff

That would be great thanks @Dirtydatto. I need a set of vinyl's for my 240 but just haven't gotten around to organising them yet. Regards Jeff

Something to do with the fuel filler pipe? That’s solid! Jeff

I would be interested to get a rear glass and very interested if they could come with the horizontal imbedded defrost wires. Jeff

Summernats Jeff

Thanks NatO. I don’t have the entire item but what I have (the white section) is ~215 long

Nat0 are you making the short original one or the longer later one? I’m in for a short one as I only have the bulb carrier section. thanks Jeff

Under law in Australia all bikes must be sold with a bell. Yes even a $10k down hill bike must be sold with a bell. Never happens. But the shop should supply a bell it will be a very simple cheap bell but it is a bell. Jeff

Youhan They and both similar bikes, 29” hard tails. Neither are a bikes I would ride as I’m into longer travel and slacker angles. Both would be capable entry level XC bikes. With these bikes as with most bike models the more you pay the more you get. Advice I give to most people who are purchasing bikes is to get the one that suits your needs and pay as much as you can afford because the better equiped bike will be better to ride and last longer. Jeff

Double post

Original (probably not 100% original) style radiator for sale. 2 core. I have an AL unit in the car and have no use for this radiator that came in the car when purchased. I have no idea what it’s worth so we can start at $250 plus shipping happy to discuss price. Better it’s in a car than at the back of my shed. It’s in Canberra.

Sold

260Z not 240. Number plate light. Wider than 240. Dirty but otherwise good condition. Bulb fittings have no rust. No bulbs. $100 plus postage. Jeff

I have a cowl panel that has lots of bog in it. Rusted on both L&R sides. If you want to spend some time it’s repairable. Even a rough repair would be better than the fibreglass alternative. $75.00 plus postage but probably better to be picked up. In Canberra. Jeff

Set of door handles in good condition. You can still get these new from Nissan but if you want a lower cost option. $40 for the two plus postage Jeff

240/260 fan rotational switch including knob. Knob is cracked and will need attention. Switch is fully operational. $40 plus postage. Jeff

As the title suggests a 260z centre console air vents section. Small chip out of one of the air vents see photo. Including map lights. $100 or offer plus postage. Jeff