Jump to content

HKSZ

Members
  • Posts

    297
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by HKSZ

  1. HKSZ

    Hot Street L28 build

    Two benefits are you can remove the plugs for cleaning each time the motor is rebuilt and a threaded plug is less likely to blow out when using a HP oil pump
  2. Type of nut to use Easy option would be a tapered datsun nut, but if std nissan mag has 14mm hole is the 16mm hole in the turbo too big. I don't know what the factory mitsi nut looks like? I thought maybe drill out the holes and fit TRX nuts that have both short shank and taper
  3. Anybody have these mags on their car? I've see a few on Zeds what nuts are they using. 15x6 with the same offset as r30 skyline mags. Stud hole is 16mm skyline stud hole 14mm TRX nut shown 17.5mm
  4. Any word on if they are changing vehicle age? Here in Vic it's currently 25 years old, my motorcycle club said they are trying to make it 30 years old
  5. Are you trying to tune the motor while its cold? take it for a run first before adjusting things, more advance and webers like to idle at 900/ 1000rpm To me its sounds like your plugs are fouling and the carbs aren't balanced. Ive never needed a choke on webers just one pump start car let them rumble into life then drive the car straight away, never let them sit and idle will foul the plugs for sure.
  6. How old is the battery and how many CCA is it? the elec dizzy needs a big kick, slow cranking fouls the plugs easy on triples and you end up chasing your tail. What coil are you using? Get it running and bump the timing up to 17 deg
  7. It's likely the roller and its cage have fallen out and are jamming inside
  8. Sorry Jason, couldn't even see your taillights. Wow, a track like that would get me off the dirt and back on the bitchy again
  9. Just watched this, no Zeds here but may get you g'd up for next year
  10. From the front use Vase and a hairdryer to soften open up the hole.
  11. Dale Earnhardt was opposed to FHR and was he's reputed to say "I'm not wearing that dang noose around my neck". Sadly it was his very crash and death that made Hans and alike manditory in Nascar.
  12. Yeah I just caught it, have a look at ONE HD next Saturday I think that is a replay.
  13. Photo, Volvo alloy wheels I seriously run 2 locks now
  14. Posting for a mate stolen silver tandem trailer form East Brighton last night. Fortunately The Datto is safe. Stolen trailer has open ladder bar deck, any info call 0407691913 Jeff or the Police Rego VIC S21 575 Bugger, the photo I've got is to big see if I can get another
  15. George if your doing the body work yourself then do one panel at a time and don't move on till you finish it off. At least this way you can look at the car and be happy with yourself, the build is moving forward and you've accomplished/finished something. A car covered in half finished repairs looks insumountable. A Sharpie and zip lock lunch bags are your friends, bag and tag the lot.
  16. HKSZ

    Wade camshaft

    Looks like my two Wade cams have gone up in value. After 50 years in business they are closing the doors this week. Real shame have always been good people to deal with and talk to.
  17. HKSZ

    Wade camshaft

    Its like trying to read tea leaves to me, the first cam must sit lower than a 74, closer to 72
  18. HKSZ

    Wade camshaft

    Here's what a 74 looks like to compare
  19. HKSZ

    Wade camshaft

    Can someone give me an idea how aggressive this custom grind is. I have only ever spoken in terms of 68 72 74 degrees works grinds where does this sit?
  20. ashtray
  21. Series 1
  22. Gav I've got a throttle knob but would prefer to sell the entire consul, which ain't much better than what you have, might have some roof skins too. Steve
  23. I thought this was going to be the new race car, is he giving away racing all together? You've done a ship load of work there in good time well done.
  24. HKSZ

    WTB fibreglass bonnet

    I thought I'd see if there is any decent 2nd hand going around first, I do have one of their fibreglass hatches which is nice weight saving over steel.
×
×
  • Create New...