New Zed Interiors

[reverendzed]

Hi Guys,

I'm about to do an order from my O/S supplier and thought I'd offer up the opportunity to get in on some good prices.  Feel free to PM me for more details or email revzed@gmail.com.  All prices are plus shipping to you from the Gold Coast.

 

240Z / 260Z New Seat Covers $400.00 set

 

Diamond embossed Trans tunnel/Riser/ Wheel arch/ Shock tower set: $350.00

 

Diamond stitched Trans tunnel/Riser/ Wheel arch/ Shock tower set: $395.00

 

240z/260z Door trims: $250 set

 

Diamond stitched padded leather look per metre $160.00

 

Diamond Pressed leather look vinyl per Metre $150.00

 

Can also do custom covers for any seat model if you can give me the old covers.  Most custom covers start at $550 per set.  Compared to Australian prices from retrimmers of anywhere from $1800 upward!

 

Let me know your interest!

Rev.

[reverendzed]

Orders are going in this week - anybody else?

 

Cheers,

Rev

[gilltech]

Hi Rev, email  PM  heading your way.

R,

John

Edited August 8, 2016 by gilltech

[chardtye]

Yep I'm in

[reverendzed]

OK Guys - I'm sending over some templates of custom covers to be made and also placing order for some 240Z covers with vents (look stock)

 

Any other takers?  You probably have until this time next week to get your oder in before the current orders are dispatched.

 

Don't forget, my guys can do total custom work at a fraction of the cost to get made locally with outstanding workmanship.

 

Cheers,

Rev

[biggels240z]

Hey Rev

 

do you have any photos of the door trims?

 

cheers

RIchard

[chardtye]

I might pass. Getting a big order from z store soon .

[reverendzed]

Orders going in tomorrow - get in on these great deals while the dollar is good!

cheers,

Rev

[d3c0y]

Any pics of the finished products?

[Linton]

brown 260 2+2 door trims would be nice pm me your details

Ta!

[Gordo]

Hey Dave, how did this all go. Any pics of the finished seats?

[reverendzed]

[russandra]

Dave, I know have those seats for my Z, interested in the covers to match the tunnel, rear strut towers etc, would you be able to do some for a 240

[74zzz]

Are you still bringing these over?  Interested in standard 260z seat covers and standard door covers 

[AndBir]

4 hours ago, 74zzz said:

Interested in standard 260z seat covers

You could also try Rob at the ZFactory for the seat covers - a very accurate reproduction and they fitted my seats very well.

http://www.zfactory.com.au/price-lists.html

[JDM-TOY]

2 hours ago, AndBir said:

You could also try Rob at the ZFactory for the seat covers - a very accurate reproduction and they fitted my seats very well.

http://www.zfactory.com.au/price-lists.html

Yeah I agree. I got mine from Rob at Z Factory and couldn't be happier.

[gav240z]

That looks almost OEM, the grain is very slightly different (for the nitpickers) but certainly better than 99% of the stuff I've seen from various North American vendors.

[JDM-TOY]

@gav240z pretty decent for reproduction. I just hope I dont slide around when turning corners. I had this issue with the seats in my RA23 so I upgraded to Sparco seats and hated my life after that. They were sitting too tall in the car and I couldn't adjust the height due to the rail mounts. Didn't want to mount directly on the floor. Hopefully if I need to upgrade ill get bride seats in the Z as I heard they sit low in the Z or can be adjusted 

[74zzz]

On 3/18/2019 at 7:01 PM, AndBir said:

You could also try Rob at the ZFactory for the seat covers - a very accurate reproduction and they fitted my seats very well.

http://www.zfactory.com.au/price-lists.html

just wondering...does he do door trims also? will give him a call tomorrow

[AndBir]

13 minutes ago, 74zzz said:

just wondering...does he do door trims also? will give him a call tomorrow

Not sure, I have not seen any when I have visited his shop - but worth a call.

If not then this site recently mentioned may be an option depending on the cost : http://www.mspeed-japan.com/product_information.php?page_num=1&category_id=7