Scoota G

I could provide a 2+2 model.

I'm considering selling full coilover brake packages with new Bearings, spindles pins and bushes, vented front rotors and the option of larger 300MM disc and a 1" Wilwood Master Cylinder. All the gear you see in the pics.

Nice to see another Mark here, way too many Dimitri's here for a while there. Just thought i would mention what i did with the roof lining. Clark Rubber sell Acoustic Foam. Although it is slightly thicker it still fits. I grabbed a piece 1/2 a lineal meter and same of new vinyl. Good part is with the Acoustic foam is it has a backing that is (you guessed it) Adhesive. So you can gut the template with the vinyl, lay it on the acoustic foam with the old Kwik Grip (mum always called it kiwi grip) on both sides which leaves the mess outside the Zed cabin (it's a small space to work in so take out the seats). Then mark the centre with chalk Mark and centre of the roof. Peel backing off and fit it up with a plastic plastic trowel on the ends. Just another way of doing it and fresh vinyl is awesome.

Reckon i have spare ones. PM Me.

Ignore him /\ /\ /\ It's easy a 25K job all engineered. Parts are half of that needs brake suspension upgrade and you'll need a VGC Zed to start with.

The one that is not contained in that diagram.

The paint will heat up and melt to the disc instantly.

Mine is in front of the passenger seat. No issue hitting on seat.

Another way to do it is if you have the car under restoration drill out the spot weld and turn it around then weld it back in. Simples.

Just let you guys know there are other mounting holes there you just have to drill and tap them. I'll go get a picture.

You need help in more than one way. From my experience they are satin black. I say stuff the trend or this concourse crap and get em chromed

2 Seater? The 2+2 Glass is different but i have about 4 out the back.

Hey Rev if you apply heat to the dash the covering will come free and go hard as a rock. It's how i remove the old dash plastic vinyl.

I suppose sending it back is not an option. Put them in the fridge and then try it. http://physics.stackexchange.com/questions/28181/what-kinds-of-materials-contract-the-most-in-cold-temperatures

Yep Geoff you are correct. I'll do a setup up and post some pictures.

I'm going to disagree with this strongly. Total Height is 43MM leaving hat height at 23MM. It requires a spacer to work.

What ya'll lookin for some skin. Wrong forum buddy?? Seriously but grab one from rare spares, they need tweaking but work just fine.

Bit of a development upgrade for all the race inspired guys or people who like to fill out the inside of the wheel. The brackets are again reworked R31 units which allows the use of a 300MM Rotor at the rear. You can see the difference in the rotors in the last picture which it's obviously substantial size and would require 17" rims for fitment.

I think i have a rear bumper but condition is not fantastic certainly useable. I'll be taking the towbar off my Zed so have one of those too. PM me for pics.

Yea in the better weather for sure. Lorne to Apollo Bay is the be4st bit!

Haha /\ /\ /\ This guy is the best!

Gimme $300 for juice 12 hours and a big ole 9 INCH GRINDER MWAHAHAHAHAHAAAAAAAAAAAAAAAAAA!

I may be going there next week.

In the next week or so it is quite possible that i will travel to Sydney from Ballarat/Melbourne and then back again. If you have something you want transported PM me. I'll have a family sized sedan and a 6 x 4.

A friend has one in storage. I'll ask him a price.