C.A.R. Posted December 4, 2012 Posted December 4, 2012 Day Cancelled. Due to finding issues with the Zed that can't be fixed in a short space of time, I am cancelling this workshop day. Thank-you to everyone for their interest in attending & I hope to run this day again sometime in the first half of the year. The LightMaster (Bruce) needs some urgent 'maintenance' performed on his Zed over the New Year holidays. It's basicly a suspension & brakes refresh with a small amount of rust repair thrown in. Date: 29th of December, 2012. Time: I'll be starting at 8am, but just turn up at whatever time suits you! If you are not holidaying away, come join us! This will be a great opportunity for newer members to learn a how to work on their Zeds as well. BBQ & refreshments will be provided. Location will be at my home workshop near Warragul, Vic. PM me for the address Any interest or suggestions would be appreciated! --------------------------------------------------------------------------------------- Attending: Lightmaster - Bruce Maygz - Simon Zedman240 - Dimitri PB260Z - Peter Peter Mac Agno - Alex Sirpent - John (Maybe) Scoota - Mark (Maybe) Bluebird68 - David Myself.
luvemfast Posted December 4, 2012 Posted December 4, 2012 I'll be away at that time. But could do before new years?
MaygZ Posted December 4, 2012 Posted December 4, 2012 I'm in! Will have to check rosters for a date, but I'm in! It just might save a life
PZG302 Posted December 4, 2012 Posted December 4, 2012 Feck, if it was between Boxing Day and new Years Eve I would be in as I will be heading to Mexico for Christmas at the outlaws.
Moderators Zedman240® Posted December 4, 2012 Moderators Posted December 4, 2012 I can be in, at last I can help with changing that cracked headlight!!
Moderators PB260Z Posted December 4, 2012 Moderators Posted December 4, 2012 Lurch, I may well come down for that one. Won't know for sure until a little closer to that date + some logistics to sort out, but definately keen Cheers PB PS Dimitri, if I do will bring some extra luggage
peter mc Posted December 4, 2012 Posted December 4, 2012 hay what parts are needed mate give me a list , i will see what i can find
C.A.R. Posted December 4, 2012 Author Posted December 4, 2012 Would the weekend of the 29th/30th Dec. be better for people?
Moderators PB260Z Posted December 4, 2012 Moderators Posted December 4, 2012 Both weekends are the same for me
Moderators Zedman240® Posted December 4, 2012 Moderators Posted December 4, 2012 Thanks Peter..that will be immensely appreciated!!
Agno Posted December 4, 2012 Posted December 4, 2012 I'll try my best to be there, sounds like fun to me. I'd love to see someone show me how to properly rust repair, God knows my car needs some loving in this department!
lightmaster240z Posted December 4, 2012 Posted December 4, 2012 You have to Lov you guys. I only thing I am good at is taking Photos of Zed ::)and handing the right spanner to the guy who know what he doing. I do have the Lights here for you Dimitri for you to put in. All other part are being collected as we speck.
PZG302 Posted December 5, 2012 Posted December 5, 2012 If it's the weekend of the 29th 30th I should be abe to sneak down for a bit, depends on what has been planned for me and where.
MaygZ Posted December 5, 2012 Posted December 5, 2012 29/30 I can do. What's the list of jobs to do and what are the tool requirements? Coil-overs? Nolethane kit throughout? Ball joints? Tie-rod ends? wheel bearings? The fronts are so cheap they might as well be replaced. Shockers/inserts front and rear? Steering wheel?
Sirpent Posted December 5, 2012 Posted December 5, 2012 I'm 80% certian I can make it, be a pleasure to help out "Ted"
Agno Posted December 5, 2012 Posted December 5, 2012 How about adjusting a handbrake of cars with a disk brake rear end? Mine is awfully adjusted and I wouldn't know where to start to make it better
C.A.R. Posted December 5, 2012 Author Posted December 5, 2012 I have my own tools, but if anyone has a FULL toolkit/box they could bring, it would be very handy. Half dozen blokes fighting over the one spanner would be a nuisance... Alex - we shall see what we can do!
Moderators PB260Z Posted December 5, 2012 Moderators Posted December 5, 2012 Lurch, I have a full a mechanics toolkit etc, assuming I make it I will toss the boxes in back. Cheers PB
YosemiteZed Posted December 6, 2012 Posted December 6, 2012 Great to see the Vic community sharing their wealth of experience and at an open practical knowledge opportunity Agno This is an simple and easy adjustment that I have come across on a site when rear discs are installed that you might want to explore at the w/shop day, as it appears to be a common issue after mods on rear brakes, check this link http://www.nyzcc.org/viewtopic.php?f=7&t=297 Its great to be a member of the site and these events give it more strength I wish I could be there Cheers Phil
luvemfast Posted December 6, 2012 Posted December 6, 2012 I've checked the calender and I'm not able to make it.
C.A.R. Posted December 6, 2012 Author Posted December 6, 2012 I asked the wife & I was told I had to perform household chores & mow the lawns. Fixed for accuracy.
C.A.R. Posted December 6, 2012 Author Posted December 6, 2012 29/30 I can do. What's the list of jobs to do and what are the tool requirements? Coil-overs? Nolethane kit throughout? Ball joints? Tie-rod ends? wheel bearings? The fronts are so cheap they might as well be replaced. Shockers/inserts front and rear? Steering wheel? Full bush kit Tie-Rod ends Front Wheel Bearing Rear Damper cartridges Steering wheel - maybe. Lurch, I have a full a mechanics toolkit etc, assuming I make it I will toss the boxes in back. Cheers PB Good stuff - thanks Peter!
Moderators PB260Z Posted December 6, 2012 Moderators Posted December 6, 2012 Full bush kit Tie-Rod ends Front Wheel Bearing Rear Damper cartridges Steering wheel - maybe. And after lunch ?
Scoota G Posted December 6, 2012 Posted December 6, 2012 See if i can make it down and take orders for a change!
Recommended Posts