Jump to content

nat0_240_chevZ

Members
  • Posts

    864
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by nat0_240_chevZ

  1. just swap right over to the 5 studs all round!!! otherwise the z31 NA have replacement 4 stud rear stubs. you can also swap the front rotors, hubs etc, but need to backspace the rotor, to put it back where its meant to be. offset gain in the front of about +19mm per side, good for later model wheels. i think you get a +3mm on the rear if you just use the z31 rear stubs in the s30 chap strut housing. now this 200ZR, you speak of, do you have a writeoff/wreck??? do you have the front end??? where in aus are you located??? (if in aus) nato
  2. sounds like you got a 2 seater seal kit by the sounds of the doors and hatch, bloody idiots. nato
  3. RIP OFF!!!! use the green white wire for power on the coil. nato
  4. as smooth as a commy, OH NO we dont want that!, rougher rougher!!! craig try this, unbolt the tailshaft from the diff, rotate 180 deg's and bolt back up, worth a try, worked on an old car of mine. if you have tried it already, well as above!!! nato
  5. i had 235's on the rear of mine with no need for flares!!! natp
  6. yea i also checked preload by trying to spin wheels in opp direction whilst on hoist, damn a nuns nasties is an understatement!!! lol SCO, are you running different tyres front & rear??? haha no dramas, i find a similar thing with understeer when tyre combos are reversed, otherwise massive drift oversteer, fun. nato
  7. ahhh yes TopGear!!! have all 9 seasons and after about 6 seasons it gets a lil sickly, but an awesome show nonetheless. I should cut the Z episode where they go from 240z -> 260z -> 280, 300 etc etc. few english cars shown, all the owners have big beards and are 55+ lol!!!! nato
  8. well you can ease off!!! the 2 way only really works in decell when downchanging and allowing the revs to pull the car back!!! its the breakaway torque setting when you back off lets the wheels free up, but when your sideways, its too late, you just have to feed the power on with the front wheels on opp lock, more power if in a slide that is gradual and steady, while correct the rear end, but just blasting the throttle breaks it away even furthar. its all great fun, easier to do than explain. suggest learning the LSD in the wet whilst in a car park, try maintaining a given opp lock and controlling the arc of your slide with the throttle not the steering wheel, once you have this under your belt its all fun, even in the wet whe you dont mean too.!!! nato
  9. the chain idea can be used in a couple of ways. You weld the chain links to the 2 round sleeves shown in the link above (what holds the rubber strap). and bolted to the body like normal. or if you can source chain with decent size links, can bolt directly to the larger bolt goes front back without the sleeve, or even diectly to the 4 smaller mounting bolts, would prefer the bigger one but. nato
  10. missing on a single cylinder would indicate an ignition problem or a compression problem but not to the extent that ign would cause. disregard the leaks and inlet trouble listed above, try new plugs, leads pionts, condensor (if running points dizzy still), ballast resistor, tacho lead in 240z layout. As the tacho is looped through on its way to the coil. Also a compression test is easy enough to confirm head integrity along with gasket, but ignition is my #1 bet. nato
  11. Yea whatever, you just swap the strut tops as this is where they are longer. Or you could run the 2+2 struts complete with lowered kings, lovels whiteline or auroras. either way, you can use them. but if you didnt or just dont know then i would be holding back with your 60's hotrod statements. The front and rear suspension are totally interchangable. nato
  12. same same same. if my memory serves me right, (been a fair while) 0.25mm ex hot 0.18mm int hot. dont flame if incorrect, any verification nato
  13. mr2 strut inserts he means, shocker cartridges. i think he may be US based also. referring to the 280z not ZX, just a guess the strut budy shortening is to allow or regain suspension travel on lowered cars. you cut the strut and re-weld (only to maintain the thread to hold the inserts in however) the perch is not normally moved if you keep the stock type lowered springs. how much you remove is up to you, but is best to have new inserts in hand before cutting, as you slide the insert in the stock strut and measure how much it moves, or you can use a packer or sleeve to take out this slop instead of cutting and rewlding. long story, there is a good writup on http://HybridZ.org best of luck nato
  14. you do know? that the rb series motor is just an evolution of the Lseries? dont believe me??? get an rb head and dummy fit it on the L6, all head bolts, cyl spacings etc are the same, water and oil however, well il leave it up to your imagination. Oh yes, excellent progress, whats your next plans ba the rollcage?? nato
  15. yea, well i thought s the car feeling light & twitchy sounded not only incorrect but not like the Zed. Ok, there is the case where if your car is faaark'd, ie small crash, bad wheel alignment, bad bushes, ball joints, tie rods, tyres, shocks etc. but if your car is, well, not good, then dont even try, id prefer to buy the car you would consider attempting it in ant a reduced price of corse before YOU KILL YOURSELF. Just dont try, and sell me your car instead!!!! :lol: nato
  16. complete rear suspension fits!! unlike above post suggest. handbrake cables rear brakes, halfshafts, diff, stub axles (but if you include these in complete rear suspension) nato
  17. nah nah easier whilst its out. when your tailshaft sway bar if u have one is in its a bit of a pita and thats from up on the hoist experience!!! lol. just finshed puting my 200 lsd in and had similar dramas, the route im going is not the chain however, i think i posted a pic earlier in this thread of the dir im going!! is very simple and practicle.
  18. nah nah easier whilst its out. when your tailshaft sway bar if u have one is in its a bit of a pita and thats from up on the hoist experience!!! lol. just finshed puting my 200 lsd in and had similar dramas, the route im going is not the chain however, i think i posted a pic earlier in this thread of the dir im going!! is very simple and practicle.
  19. possibly he may be quoting either the 70's bit above or using zhome.com's american numbers for their cars???
  20. diddo, mine is late 72 an is very low 10,000's i think off hand. nato
  21. :oops: :oops: :oops: actually in a 2+2 :oops: :oops: :oops: lol had a 240k motor with modified oilpickup and a zed sump, motor was off its face, 10.8:1 comp, 30/70 cam diashed pistons but massively shaved head and larger valves. was in a 2+2 til the dizzy clamp came loose over advanced, and melted cyl #1. but yes 210 was very fast but it did not feel scary.... not sure if its cause of the heaver 2+2 or not??? anyways yes the e-type jag, 2000GT and other similar cars of the time were the pinicale of road cars back then!!!! yea the db series cars are a great example of moder sport coupe design. id almost write them off as a modern Z at heart bar the british manufacturer. which is odd, not very british when you think of the morgon and rovers etc!!! lol nato
  22. well i also disagree about the 160kmh+ driving experience. i have personally driven a fairly stock s30 with a pumped motor up our freeway @ 210+kmh (corrected speed). I cant even begin to say how low the front end dropped and felt like it was stuck to the roads like bubble gum on a hot day. Steering was extremly direct and only needed firm fine adjustments to send you where you want to go. It would have to be the most stable car i have ever had at that sort of speed (bar a motorbike). r32gts and z32 tt are close behind but just didnt compare. i would hate however to loose it at speed as the s30's look worse for wear once invloved in a crash. I do aggree with your statements about the japanese markets of the time etc etc, but remember these cars in their day were a great little piece of motoring technology. comparing them to our newer counterparts is unfair on the old girl. I also believe that the side on roof line & body profile (well most of it)was used in the Z33 350z, i do see the olds shape but i just cant get past the uglyness of the front and rear bars etc. i also would love to see a retro restyle of the 240z, utilising an inline 2.4 six with massive turbos. still called the 240z with a few touches from the skyline gtr but rwd. nato
×
×
  • Create New...