Jump to content

nat0_240_chevZ

Members
  • Posts

    864
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by nat0_240_chevZ

  1. or just leave it there, a good spot to stash some drugs and all!! :lol: :lol: nato
  2. havent looked at the links but if US data, as they never got the 5 speed till their 260z, their 240's only came in a 4 speed. Just be carefull and scrutineer everything you read from the US, and aslo some aussie sites quote directly from other US inks so carefue again nato
  3. what does it matter?? more info please, casting # and also for the head. l series is an l series as far as im concerned nato
  4. front bar not bumper??? air dam/front spoiler, chin spoiler or bumper bar please clarify, is not coherant.
  5. pick a material from a car upholsterer, heavy duty ie automotive type grade. provided you can get it cheap enough. Or spotlight if you have to. take your seats to your granny to sew up new covers, pic the old ones off so she can use as a template, and you should be set. unlees you feel like learning how to sew or you just remember how to do it from school etc. nato
  6. yes, but they are NOT exactly Ferrari's now are they, just people taking advantage of the fact that being 30+ years old these parts dont really go the distance and there are people that are willing to pay that much just because they want it and dont want to wait around for another 10 years for one to just pop up. Yes car values have gone up overall, but generally the cars have had a near full resto, but you still hear about some of us picking up a pearler for under 5k, just open your eyes and have a look around at what some of the buys are. I wouldnt pay 10k for a car in bits that i saw on here earlier, only reason he is getting the 11k + whatever is that he has basically had to restore the car completely, with some new or excellent 2nd hand parts, or aftermarket replacements or copies. anyways probly thread jacked here, maybe we can start another topic about this, id sure have a few things to say. nato
  7. a mate of mine had 16x8 centrlines on his 240z, lowered so it sat flat and a lil bit lower on the wheels and was a tight fit but they filled the gurads perfectly and just cleared the struts, no spacers or other mods. But yes they wer a 16' wheel. nato
  8. another tip if your stuck for upper room is lean the seat back a lil and becomes a really comfy dring position once you have an after market wheel etc, feels like a semi laid back f1 position, lol. works for my seats and the position is great although i CAN sit it up without any interferance etc. nato
  9. the n42 goes straight on an l24!!!! yes it does i have done it. but the n42 over the 'later' e88 head is not much of an improvement in the sense of static CRatio. it IS however a better breathing head due to its larger vlaves than any s30 based motor. i went from (with dished pistons)L24 with a p30 (or e88, cant remember)head i think it was, blew the head gasket and went out through my bonnet vents glowing red, out left side of the block, no oil or water breach just compression out the side of the engine, had an n42 on the l26 i just pulled due to it dropping a rod bolt and stopping on the highway, no leg out of bed though (breakthrough the block). went and got the N42 faced, faced and then faced some more about 2.25mm off the face (couldent get my existing head refaced as it was flat along the cyl side but a bannana across the cam side so the engine builder said throw it away). Anyways just to show that you can put it straight on, only time you need to notch the block is when you run bigger valves than the N42 on an l24 bore. My block as you may be asking was actually a worked 240k motor which is basically identical to the 240z l24 but had dished pistons instead of the flat tops. The N42 starts to look like the u67 head sought after by the 4 cyl lseries buys like a kidney bean. excellent for high quench without much detonation, and i was running heaps of advance. Also a note to remember is that the p90 and n42 have the same combustion chamber shape, (ah before you start get them side by side) The difference is the depth of the combustion chamber shape, p90 is deeper for the reduced chamber/dish in the piston (flatop), also the valve lengths vary by about 1.4mm from the top of my head, due to this depth of the combustion chamber difference. nato
  10. an old fart at my work has proof in an old magazine, hes about 72. Its a red car with the chrome flat type fender mirrors, hatch vents, D hubcaps, pillar badges read 240z. ill ask him to bring to work again, im sure the pic is dated 12/69, it was the australian test/show car for the new model. otherwise i think another work colleage scanned the whole article, ill check with him also. The Writeup is like, 'an all new Overhead cam design, twin carbuerttion makes this car really stand out from the rest' blah blah blah. Quite amusing actually. Although it did say they were taking orders already and should be availably by the end of the year, (which they wernt here as the old fart remembers exclusivly as he was interested in getting one, ill chat him more about it). Ill do my best to get it up on the site, nato
  11. definately different. the z31 struts resemble the datsun nissan type, where the z32 are more like the newer skylines and sylvias etc. you can modify the z31 strut to use coilovers much like the s30 Z and other early datsuns/nissans nato
  12. yea width is a problem as the Z body tapers as you go up. my mate has a wrx seat sitting in his car atm, not mounted or anything but like like you could squeeze them in. my car i have i think they maybe pintara seats wich are absolutly comfortable and grab onto you wickedly but still have a road car look, i reckon il be getting them done in black leather when the funds pop up. However they do sit slightly high in the car which is good in one respect but they would be better a bit lower. The seats are a tight squeeze between the tunnel and the rocker panel but this could be fixed by straightening the offset recliner lever. Seat rails are way off but the prev ownere made some Mild steel adaptor brackets which i most certainly change to nicer, better made S/steel formed and shaped, like a cradle for the seat which the rails bolt onto. nato if i can find some pics ill post but dont hold your breath
  13. yea it will be close, depending on dia, as you get nearer to thr spring perches you start to run outta room. jack up the carfrom the control arms and measure with a straight edge across the wheel flange and a tape measure in the other. nato
  14. check for leaks, when you fill it right up. leaks in fuel lines. u running an electric fuel pump? with no return line? take off aircleaner and see if you can see fuel spewing out the main jet (with a mierror of course) where the needles goes to. that sort of fuel economy would challenge the bugatti at full noise!! nato
  15. yes your stock diff "SHOULD" be an r200 open. Nore should as said above the previous owners can do strange things. iva also put an r32 tomei 2way lsd into a stock 260z r200 with 3.54 gears to suit the v8 moreso but. the dr30 doff is a good swap but make certain it is an lsd before buying. pop the back cover off and aslong as you know what your looking at you should be ok, but the condition of the internals is a lil harder to check. nato
  16. just find the switch and pop it in. easy to do, but if you really dont care, get a switch that bridges the lh and rh indicator wires closed will flash both indicators with you ind stick left or right but when switch is open only your desired side flashes!!!! nato
  17. was like an option, i sold the switch via mail to a fellow on another forum. the wiring on the loom is all there but is bridged so your indicators work, have a look its the cluster of green wires with a 6pin plug i think. some option hey. heres your pic with spots for it, also i noticed you dont have the choke light there also??
  18. mmmm, now if my first thoughts served me wrong?? mmmm, need i say anymore lol
  19. if it were hls30--204 yes. however it is most likely to be one of the australian delivered 1st 500 as it is 204? 69 models were basically all us delivered as it was their main targeted audience. nato
  20. Some questions..... 1-which 1/4 of your tank did you notice it use?? up high or low? 2-does the car idle slightly higher when you put your fingers (spread to allow air through but not heaps) infront of the intake rams? 3-do you have much play in the throttle linkage where it enters the carby? 4-generally how well does the car run? 5- how fast is it idling?? and also of course it chews fuel when stuck in traffic, stop start stop start, big sqirt everytime the pedal is pumped. answer a few of those q's and we'll go from there i reckon, also do you have a timing light?? And a dyno session isnt going to net you many extra HPs unless they have/are a specialised carby tuner along with vacuum and mechanical advance experience, most places only plug into your ecu and edit a few parameters re VE curves etc. nato
  21. be carefull with the grade that they recommend. too thick = sincro and dog collar grind when cold and/or in winter months and renders your box due for replacements much much sooner than anyone would like. Ive had recommended and used (in a different car however a FWD mitsi) straight motor oil but was a multigrade 20w70w now even on the coldest mornings i can change briskly and when it warms up even quicker. It all depends on the 'drag' the oil creates on the rotating assy, heaps with 90w oil, which is probly what you found when rotating the out shaft when in neutral. just my 2c nato
  22. size of the tripples more depends on engine application, (revs/displacement/cam) for a really hot road going car the 40's are more than adequete. 45's, 48's and 50's are for all out race engine regularly seing the redline and not falling below 4.5k carburettion type and size would/should be kept in mind whilst performing any 'work' as such but not entirely essential. Port work however, ie manifold matching etc should be done to suit your manifold you are going to use as their ports on their mating flange are almost certainly going to differ. for a road going car, i wouldnt stress too much on it, but also depends on how you drive your car i suppose. nato
  23. yea dave is on the money there. Its all about port velocity, this is the speed of the air through the port, smaller ports = higher speeds of intake charge aswell as the natural pressure equalisation that tries to occur high to low, the speed is also affected by steps (large to small and vice versa) which affects the final filling pressure in the cyl, bends and things such as our throttle butterflies, gasket protrusion. reduing all of these restrictions ie port match (not boring out the ports to make them larger) slimmer butterfly shafts, gasket trimming helps flow in a sense of reducing restrictions, now if we look at flow, its about HOW much air we can get through a pipe, which if my fluid mechanics and dynamics is recalled correctly flow = area x speed, so you can see where i am going, only opening up the ports to match which reduces restriction but mantaining as small a port cross sect area as possible increases the speed.... i have seen (not on the net or a forum but in person also while being done) a twin SU setup which has had nearly a year alone put into it and the extent at which porting and welding, yes welding, was done to ensure that the cross sect area does not change and if it does to within only 2% (around where the valve insert in the port). Results were only within around 5% of that of tripple 45's. Beauty of the tripples is that they are really 6 off single carbs. utilising a common float chamber and other ancillaries. Having the throttle butterfly so close to the valve head also increases the feel we call 'pick up' or 'response', as what you get with all motorbikes efi or not, still have individual throttles. Pick up is not an easy thing to measure (barely measurable at all, not even on the dyno graphs) it is just a sudden velocity change for the fuel metering device (jets, emulsifier tube, pilot air, bleed etc etc or EFI) this is where the multi-throttle side draught or similar carbs come into their own, because they respond so rapidly to throttle actuation, where as an SU has a large piston which movements are dampened by fluid above the piston (here is an area of improvement, aswell as the inertia of this piston, ie lightening etc), this gives that slight response delay, aswell as the restriction untill they fully open and even then its like a square top to a round port. As you can probly tell, the tripple or beit 3x2 = 6 throttles have a wicked sense of right foot movement, and the also sound beautifil at full noise. ill stop rambling, any specific q's just post or i could go for hours, hope it stayed inline with the thread... :oops: nato
  24. same?? i doubt, when is anything nissan the same lol. different part with diff shift mangaers and workers i fit a 240k box in my old 260 and the box is shorter aswell as the gearstick by about 50-65mm both if i remember correctly. It still goes in and all but the tail shaft yoke only engaegs about halfway and the stick is hard to get in 1 3 5th gears unles you grind/cut the shifter opening or unless doing an auto->man swap then even more cutting. nato similar just not same
  25. nice find, one of those happily ever afters early models. look if your keen to do the work yourself id recommend it highly, with a lil bit of know how with ALOT of determination you can get heaps done. not sure of your time constraints etc, but be prepared, you will wish there are 2 of u. not really sure also on your existing capabilities and experience, start with the workshop manual etc, then forums for other pics and tips etc, but beware as not all info on forums is correct nor even close sometimes. start with the body, and stay with the body. (make sure the car is safe 1st and foremost) start small and then work big. angl grinder with a flap disc will do wonders for removing bubbles and paint to reaveal a section usually deemed for repair. give us a more educated question and we'll try give a more educated answer, again excellent find nato
×
×
  • Create New...