Gtv240z Posted October 25, 2017 Posted October 25, 2017 Datsun 240z 260z Coolant Pipe, 3 way water pipe, connector for heater hoses Genuine Nissan part Free postage Australia wide Quote
ilbert Posted October 25, 2017 Posted October 25, 2017 Do you have a price for this champ? zed74 1 Quote
Gtv240z Posted October 26, 2017 Author Posted October 26, 2017 Oops! They're $35 including postage Quote
zed74 Posted October 26, 2017 Posted October 26, 2017 Ok thanks I will take one. I think I ,may have your details from last purchase will confirm via PM Gtv240z 1 Quote
John Posted October 30, 2017 Posted October 30, 2017 Hi there, I would like to purchase one of these heater hose connectors. I would also like to purchase the longer one that goes around the back of the motor if you have these. regards John Quote
Gtv240z Posted October 30, 2017 Author Posted October 30, 2017 Hi there, I would like to purchase one of these heater hose connectors. I would also like to purchase the longer one that goes around the back of the motor if you have these. regards John Hi John, Unfortunately I cant really get these ones , some versions do still appear to be available out of the US. I do have in stock the elbow fitting for the heater hose that screws into the cylinder head. I have pm'd you Thanks Quote
gilltech Posted October 31, 2017 Posted October 31, 2017 John, A while back the vendor 'nissandatsunparts' on eBay was advertising that same coolant pipe, NOS, check with him I don't know whether it sold but he may have had more than one in stock. Worth a try anyway, he advertises various Zed odds and sods from time to time. Gtv240z 1 Quote
Simestime Posted October 31, 2017 Posted October 31, 2017 That would be warren at all z parts sydney. Gtv240z 1 Quote
AndBir Posted June 10, 2018 Posted June 10, 2018 I'm interested in purchasing one of these if you have any? Quote
Gtv240z Posted June 10, 2018 Author Posted June 10, 2018 2 hours ago, AndBir said: I'm interested in purchasing one of these if you have any? Pmd Quote
Administrators gav240z Posted June 11, 2018 Administrators Posted June 11, 2018 I need the pipe that goes between the intake manifold if anyone has those! Quote
Roady Posted June 12, 2018 Posted June 12, 2018 About 5 years ago I walked into Nissan spare parts and asked for this 3 way pipe along with the pipe that ran around the back of the engine. We found the part numbers on the microfiche and he ordered them for straight on the spot... not sure if anyone can still try Nissan themselves. Gav as for the pipe you're talking about, I think it may be much faster to find a suitable pipe, buy new screw plug fasteners, and go to a brake shop and get them to flare the ends of the pipe with the fasteners on it. I doubt anyone would pick up that it's not original once it's been used for a while - obviously just want a metal that can take the heat and not expand/contract too much. gav240z 1 Quote
Administrators gav240z Posted June 12, 2018 Administrators Posted June 12, 2018 Thanks I've dropped the manifold off to Lachlan in Warragul who is going to have the parts blasted and re-plated. I suspect he knows of a source for that center pipe. I agree on the originality aspect, nobody would know. Quote
PeterH Posted June 12, 2018 Posted June 12, 2018 (edited) Getting a bit off track from the original post here... Gav...is this the pipe you are referring to? on the two carbie manifold stets that I have the " pipe" is 10mm OD tube.... I bought some from a hydraulic shop in town and it was zinc plated. There is no flaring but a rubber ring is used part number 14013-73400 and this would allow for expansion. I cant find the two rubber rings at the moment...must be in super storage aka lost . I hope this helps. Edited June 12, 2018 by PeterH gav240z 1 Quote
Administrators gav240z Posted June 12, 2018 Administrators Posted June 12, 2018 Yep that's it exactly! Quote
redzee Posted May 6, 2020 Posted May 6, 2020 Hi Have you still got any of the three way coolant pipes for a 260z to sell? Quote
redzee Posted May 6, 2020 Posted May 6, 2020 Ok, thanks for that but at this time I have decided to eliminate the need for a three way set up and disconnect the water flow to the carbs. Quote
Ken Posted May 2, 2023 Posted May 2, 2023 On 10/25/2017 at 11:12 AM, Gtv240z said: Datsun 240z 260z Coolant Pipe, 3 way water pipe, connector for heater hoses Genuine Nissan part Free postage Australia wide Hi, Do you still have any of these pipes available pls? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.