Lots Of 1600 And 240Z Performance Parts, Ballarat, Vic

[thehelix112]

Hey guys,

Managed to get to my parents place after 6 years in the states to sell off all my Datsun stuff. I have a bunch of things for sale, as per another thread on here, this thread is for all the many parts I collected over several years, in preparation for building up my 16 and 240Z. My loss is your gain, I'm hopeful folks will find some hard-to-get things here that'll get to see the light of say in someone else's project!

 

Get in touch with me via email: david dot andrews112 at gmail dot com

 

Edit, added the S15 SR20 and R200 diffs I mentioned previously to keep everything in the one spot.

 

For Sale:
 

S15 SR20DET + 6-speed, JDM, 5000kms: $3,000: https://goo.gl/photos/TuiAKxBbDyXEHAyz9

240Z forged Arias pistons and L-series rods, good condition: $300: https://goo.gl/photos/Hi8eqBjXxiDfVk1FA

240z rear controls arms, used, will remove spiders before sale, $50: https://goo.gl/photos/Evt4iB6RjVdcjSxb6
240z/1600 rear half shafts, 2. $50 https://goo.gl/photos/bohVVdUtUrUPwXtS6
1600 Datsport adjustable rear x-member, brand new, $500: https://goo.gl/photos/5UtQwHtPC49TD6P37
Unknown shock inserts, 1 blown: $20: https://goo.gl/photos/SFn9BPhQA7sN9uwe9 https://goo.gl/photos/u749PDVKf7nC2EMy9
1600 Whiteline adjustable sway bar, brand new, $100: https://goo.gl/photos/uR4HW4s3SJYjKHn56
1600/SR20 Datsport gearbox x-member, brand new: $150: https://goo.gl/photos/Vic49XgEsUdtQ9QG9
1600 Whiteline strut brace, brand new, $120: https://goo.gl/photos/53ggD19gC6CAchHc8
1600 brackets to mount a shell on a rotisserie, used for my project car, $50: https://goo.gl/photos/EotdQ1JfQimGmUj69 
1600 front eyebrows, excellent condition: $200: https://goo.gl/photos/jJ3go2aZNPgN6WSK8
1600 front headline surrounds, excellent condition, $200: https://goo.gl/photos/zgvpFaRY4A7KYURs5

1600 side indicator assembly pair, brand new, $150: https://goo.gl/photos/d1YMee6rXcmgWRWz9

Datsport transmission cover kit, $132 brand new, $80: https://goo.gl/photos/8nm2yX3F4EB8YAHh6

240k front struts, with rotors (and I have a set of calipers to go with it): $50 https://goo.gl/photos/fwYMrkGhztZyCwbG6

Autometer pro-comp 10K RPM tacho, brand new: $100: https://goo.gl/photos/EJP5ZtCzLHsLQdfh6
Pierburg EFI fuel pump, brand new: $50: https://goo.gl/photos/jB8UxQ5VorsMnxNX8
3" stainless muffler, brand new, $50

Sale Pending:
1600/SR20 3" turbo dump-pipe, brand new, $100: https://goo.gl/photos/xW2om6ae3vY87Tpd7
L-series gearbox, unknown condition. It has the 4-bolt flange outlet so it _might_ be the close ratio 240z box. Not sure. Also have tailshaft to match: $200.https://goo.gl/photos/P8fXH9vXpikgT9kc9
1600 adjustable castor rods, $100: https://goo.gl/photos/rFNG3yA5aasHsnY69
1600 rear tail lights and front parkers/indicators, brand new, $500: https://goo.gl/photos/RTad966GcCR9Xxza7

1600 noltec adjustable strut tops, brand new: $100, https://goo.gl/photos/vZDxSECbYau7aT2Z8

Bosch VL Turbo fuel pump: 0 580 464 070, brand new: $50: https://goo.gl/photos/S2rL1WDtLgc4LVFPA

R200 LSD 4.4 with axles, $1,100: https://goo.gl/photos/CyjdVdBHFooCfnJV6

R200 LSD 4.4, $900: https://goo.gl/photos/CyjdVdBHFooCfnJV6

1600 adjustable lower control arms, brand new, includes bolts, $200: https://goo.gl/photos/j6NXWaAxfVc29ULX7

 

Sold:

I believe I've priced these things fairly and to move aggressively, if I'm wrong, feel free to explain to me why and we can talk from there.

 

Dave

Edited November 16, 2015 by thehelix112

[theremm]

PM sent RE konis

[dat2kman]

Try Ozdat for the 1600 stuff.

[thehelix112]

Thanks dat2kman, I did put the same ad up over there, I was just too lazy to edit it here.  If it's inappropriate as is I can do so though.

 

theremm, replied.

 

Dave

[gav240z]

Sale Pending:

L-series gearbox, unknown condition. It has the 4-bolt flange outlet so it _might_ be the close ratio 240z box. Not sure. Also have tailshaft to match: $200.https://goo.gl/photos/P8fXH9vXpikgT9kc9

 

It certainly looks like an early 240z 71A gearbox. But I can never quite tell the difference between a 240z and Roadster box.

[1600dave]

Roadster boxes are shorter (rear extension is shorter) and the starter motor is on the passenger (left hand) side of the car. 

Edited November 10, 2015 by 1600dave

[gav240z]

Thanks so this must be a 240z box.

[strt260]

PM for the Bosch fuel pump.

[thehelix112]

strt260, replied.  Thanks.

 

Gav, Dave, thanks for the info!

 

Dave

[thriller]

Sent a PM about the 4.4 LSD (no axles). Shotgun

Edited November 10, 2015 by thriller

[locklock]

Are those pistons good? I kinda like it.

Would it make a stock L24 compression higher?

Edited November 10, 2015 by locklock

[HKSZ]

Pm sent 1600 stuff

[phillay]

backup for the LSD if any of them falls through.

[thehelix112]

No response from thriller on lsd, and phillay decided against. LSD diff without axles is back up for sale!

[HKSZ]

Dave can you contact me, in Ballarat this week

[gav240z]

Did the 71A gearbox w/tail shaft to match sell in the end? If not I would be interested, but won't be able to collect for a while. Send me a PM if it's available.

[pab1679dato]

PM'd re 240k struts

 cheers Peter

[thehelix112]

Thanks Peter. Responded via email.

 

Dave

[thehelix112]

Gav,

 

Yeah the box sold to a mate.

 

Dave

[import monky]

Interested in the rear control arms pending price of freight to sydney. Could you message me on 0432860997? Cheers

[thehelix112]

Hey import monky,

 

I'm in the US, so can't really msg you I'm sorry.  My old man, whose house it's all at, and who pops stuff in the mail for me when necessary is also here visiting.

I dare say most of the money in those arms will be the courier.  If you wanna organize it via e-go from Ballarat, when my dad is back in the country he should be able to drop them off.  PM or email me if you wanna go ahead.

 

Thanks,

 

Dave