Scoota G

Ive got one here, the first car i rebuilt, it's in some of my gallery photos.

Lol... yea the magic of Hollywood. I think they call that a "stand in" imagine how hard it would be to find a two seater in that condition that Wasn't restored... Depending on the filming location naturally. I didn't know it was on PS3 as well http://www.youtube.com/watch?v=gcYssgJ14C4

Welcome... but just a word of warning, you may want to fill in your location and clean up the grammar before you get chewed out by "The Lurch Monster"

Yea thats a radius rod and it stops the track control arm from moving back and forth... I purchased new rubbers directly from Bursons. Make sure to ask for the polyurethane ones.

Bloody cry baby neighbours, my sister lived next door to a couple and if she turned the music up even a fraction he was at the front door. I moved into her place for a while and when he tried it on me i chased him out of the yard and down the street. Tell your neighbours to get stuffed, you can make as much noise as you like between 7am to 7pm as long as it's work related no one can do a thing about it.

But i Wuv the sound of my 45MM Dellortos

This one seems ok. http://cgi.ebay.com.au/1978-Datsun-260Z-FAIRLADY-Silver-Blue-5sp-M-2D-COUPE_W0QQitemZ260441120338QQcmdZViewItemQQptZAU_Cars?hash=item3ca3801e52&_trksid=p3286.c0.m14&_trkparms=65%3A1%7C66%3A2%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50

Have you done a psi / compression check on all cylinders?

Yes, very much so. This is the 2 door item.

Right i'll walk into Nissan and ask them myself... Unless we have a liaison with a little more Tact than i?

Maybe the Fuzzy Drop Bear has one

Yea $30 is the minimum charge and the containers they use to do them are about 60 cm high and 30 cm wide which would allow for a lot more parts to be done. I only tried the zinc because thats what the parts were but apperently they dip them in chrome first (after the acid dip) and then into the zinc which you can get done blue or gold. Dalee and i are getting another bunch of parts done which is probably a good idea as you get more for your Dollar. Only problem is they usually take a couple of weeks cause they put them through with other orders. But they are the only chromer in town.

Good idea, ta! Cost me $30 to get these done.

Seeing as the fellas at Nissan with the 370Z seem pretty friendly, is there any chance we could get them to send us a list of parts that they have available for the 240/260/280ZX and perhaps a bit of a price list too?

Got these bits back today!

You can put Pictures up by clicking Additional Options... at the bottom left hand corner when you're replying or creating a thread.

The rear sprocket is a Kartech 76 tooth, front was a 12 from memory.

Another "Scoota" pic

Yes i do have some Bigger Pics, i built it myself 100%, 53cc, 20kgs, 70 kph+, GoKart running gear, centrifugal clutch, Modified Carby and hand built exhaust. Motor was modified with advice from a Local who built competition chainsaws in the US. It's why they call me Scoota. I'll post better pics soon.

This was my attempt at building another Motorized Transport

Like this one http://www.datman.co.uk/techtips/index.htm Not this one

Just got mine skimmed last week (with some really dodgey porting that i did) cost me 75 squid

Don't forget the new Head Bolts too :-D ROFL.

Did anyone mention to set the TDC on No 1.

Yea my bad... i put mine back in yesterday