Jump to content

nat0_240_chevZ

Members
  • Posts

    864
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by nat0_240_chevZ

  1. not flaming, but i had some new but old tc rod bushes from noltec and the split and fell out with just 3 hard laps around the block testing everything out, dropped the nolathan redies in (used) and still no dramas!!! just me exp so far, and yes noltec do/did make rear adj bushes but havent investigated lately. nato
  2. yea diddo looks like most of the ones i have on engines around the place. ill have another closer look and probly grab one if youre interested, postage is all yours however, and i will send it through a courier at work so like 15$ from memory but ill confirm later. cheers nato
  3. able to share it on limewire, torrents for an hour or so, depends how fast your connection is? otherwise how bout i pay u for a cd to be burnt and posted? ill have a look around for a similar housing, after top and bottom? what sets this one apart? looks like most i have seen etc. cheers nato
  4. umm, s 1, got a pic of a knackered one?? sure id have one around somewhere. 2 or 3 bolts holding it down??? this PDf you speak of, are you able to link us up??? :-*ass
  5. damn what a farkwit, hard to find an honest competent mechanic these days. Nice buy, i remember looking at that one and thinking it was a very nice starting block. What did you pick it up for if you dont mind me asking, PM me if you prefer, just outta interest and curiosity. Yes look for info on forums, but dont take the plunge with cash untill you are 100% as alot of people on these types of forums are 16 yo with bugger all idea or have bugger all exposure to these cars and cant really offer anything concrete in their response, NO OFFENSE GUYS. Just find someone that you are confident that knows their shizlick and get on good terms with them, most are happy to help out but have bugger all time with all their commitments, sound familiar anyone?? anyways hope to see and hear more, any Q's welcome, i have acces to 2 or 3 early s1 cars for verification info etc if you need. cheers nato
  6. well thats your opinion!!! your entitled to it, I think its a nice change, similar to a car i know of, which has 10's on the rear and 9's on the front. How long you had this puppy for?? what did it set you back? Where did you find it? what boost are you spoon feeding the rb? engine managment?? any other planned upgrades yet?? wont be long trust me. oh this and oh that lol!!! cheers & welcome. nato
  7. the long nose diffs in the silvis is i believe the s12 aka the gazelle here in aus!! from 84-87 i think the years were. no the turbo wasnt released here of course. But there are a few getting around. nato
  8. all rust gone??? but glass is still in? bit sus, as we all know wait til the glass is removed, opening another can of tin worm!!! specially the 1/4 windows, up top under they factory lead fill on the rear pillars, just a word of warning!!! nato ps 240 is now awaiting a metal finisher i know to bring it all up ready 4 paint also another 4-5 weeks till he starts, (probly another 15 years till im finished lol, nah said it should be turned around by xmas, but i still got a massive surgery to happen b4 then, anyone after some medical grade titanium???)
  9. lol no please do, show us yur middle bits!!! lol
  10. cats are for more modern cars from about mid 80's onwards!!!!! for unleaded too also i think!! well my experience tells me to stay with simarlarly sized mufferls and "resonanor' (the hot dogg thing you guys speak of) run extractors fine, 2.25' is most ideal, 2.5" if you run continuos high revs ie racing/sprinting with the l28. No 2.25 will not hurt the flow what so ever, (REMEMBER only 1 cyl is exhausting at any 1 time, sothe size of your header pipe is all you really need for the whole system, V8's are different however as they have exhaust overlap) its the length of the dogg that dictates frequency change ie resonance, measure the stock dogg and muffler and replace with straight through flow iw turbo muffler etc. from memory they are both 12" long, i recommend highly of maintaining the 12"dogg mid way through the system, keeps that resonance thing sulio talks about to a min (as you cant get rid of it all together unless you silence the whole system with 2 baffled muffs!!) trust me on this one, i had i very high revving l24 worked off its titas and boy did she growl, sounded like a touring car when opend up, but a beautiful note like a 6 cyl symphony. hope this helps, but would also be interested in what others think....any other q's welcome nato
  11. ok, to clear things up rocker arm to cam clearances are 0.18 (not 0,018) intake and 0.25 (not 0,025)mm for exhaust. yes they are called feeler or slip gauges. best to set when hot (unfortunately as cold is easier but heat changes you clearances dramatically) ther is a hot and cold clearance!!!! clearances are the same for l24,26,28,30 & 31 for the stroker boys. heres some interesting info however, if you set them higher than spec ie .25 &.35 it shifts peak tourque up the rev range, and lower than spec (not realy recommended as if you go too close will cause pre-matue wear / failure of rocker lash & cam lobe) shifts tourge down a bit lower in the rpm range. Yes, the clearance changes as you tighten the locknut, (becomes less) so be aware of it and you will work out that you must check after you are all tourqed up. each one tightens up differently so keep an eye on it. i belive from memory the spanner sizes are 14mm & 17mm?? or 15mm & 17mm bit vauge on this as it has been a very long time since i even had an l-series motor let alone done a valve clearance check. valve clearance is deducted of your cam lift before multiplying by your rocker arm ratio. ie (cam lift = 10.5mm - 0.18mm(clearance)) x 1.2 (rocker arm ratio)= actual lift @ the valve just thought id let you boys in on a bit of wealth, as sounded like you were all struggling!!! nato
  12. mmm sounds like this car!!! the orange one. nato
  13. someone i know has a 350 holley on an l28, it runs really well, but setting up the linkages to run it or using a cable is probably the hardest part in the swap besides sourcing a manifold so it just bolts straight on. (i think i know of one for sale!!! ) also find that the holley used is not tuned very vell but it still goes hard, (a bit rich down low up to about 3k), but if youre ok with carbies in general its not hard to get a holley in song. nato
  14. well thats cause we want all the idiots to go and buy silvis and skylines etc, and not bash up whats left of our beloved cars!!! nato
  15. looks very clean and nice, kudos. yea tax money, havent doen one for the past 2 years so i think 3 in one hit should see my car finished!!! :lol: nato
  16. mmm, look nice. depending on shipping costs i suppose. i personally would offer up about 600$ but im not in the market for l series units, as i have a v8, and my mates going an all out v6. gee also sounds like the person writing the description is a salesman, 4sure. nato
  17. could be a number of things...... float levels. vacuum leak post throttle valves. worn needles, did they look ok?? stuck on choke, ie jet has slid down and wont slide back up by itself!! carb synch not done i could go on and on but geive me specifics, and ill try post when i get home after work one night when not working on my car. ie, did they ever work fine? what have you done? what parts have u used? what you have adjusted and why? do you have a FSManual?? nato
  18. Had a similar prob in the ms' gemmy. replaced the dizzy, problem gone!! think it was either the points arcing out or the capacitor/condensor going nuts. FWIW nato
  19. rbz260?
  20. 280zx shafts? how much would you let me take them outta your garage for??? as the z31 shafts are way too long and dont have enough spline to just recut new groovs for the circlip. nato
  21. lol, i had my 16's simmons, machined centres out to fit the z stubs/hubs but they left the front so the stock caps were all sweet, 1 day turn around and 36$$$$$$$$ / wheel!! nato
  22. you wernt counting #1 twice, commonly i do it, when the carrier centre was sent to me the fellow sweared on his life about the spline count and it was from an r32 gtr. he was quite familiar with the centres themselvs aswell as the changeover to the 31 spline in the r33. But my centre has 29 splines and i also grabbed a gtst stub output and it too also plgged in snuggly as per the photos on the above thread. Im not saying its not possible they are 30, but mine was a gtr carrier from an r32 as i can differentiate the diff from the bolt dia's, hope i didnt miscount and the thing fits up of anyways lol. nato.
  23. have a look at this, looks an r200 long in there!!!! very impressive!!!, i want to buy one of these rear end modules, wonder how much they cost. nato
  24. its the r33's that go to 31 spline in s2 i think, early r33's had 29 output splines. but the gtr carriers have m13 crownwheel bolts unlike the m12 in all the late s30 onwards and other jap cars with the dana spicer rear ends nato
  25. yes me!!! have it in now with the uni's till i pull it all apart and put the 280zx cvs in. check classifide for the r33 cv lsd add from sco aus. as i chime in with a how to with a few fone pics. nato
×
×
  • Create New...