72240Z

WD40 is what I use. Spray it on and wipe it with a rag.

Mike260 your z looks great. The first z I ever owned was a 260 but it wasn't as nice as yours.

I bought it from Ebay https://www.ebay.com/str/Bluest-Skies?_trksid=p2047675.l2563 because an old post on hybridz https://forums.hybridz.org/topic/124563-door-seals-weatherstrip-i-found-a-set-that-works/ the picture is off the ebay ad and I don't know who made it. It's in a box in the back of the z right now but when I have some time I will compare it to the factory weatherstrip and post some pictures

My 27 piece weatherstrip kit arrived, I'll let you know how it compares to the factory parts.

You may be able to turn it 90 degrees in the vice and tweek it back into shape. Measure it with a set of calipers to see how far out of round it is and then squeeze it slowly till you get it back round. after you get it apart you can use the proper size reamer to repair the bushings. If the one out of a 73 will work you can have it for the postage from the US.

The other picture is a little misleading. The shed is 30 X 40 9.144 m X 12.192 m, it's filling up fast. I need to move another car and the contents to 2 small buildings and fit it in somewhere. For now power comes from the yellow extension cord in the picture. The first project will be building some workbenches and storage shelves.

This is the LAST time I pay mice to detail my engine!!!

It was a few days ago but I finally got my Z out of the woods and put it in the man cave.

Work in progress.

Looks like I'm only a year late, maybe I need to stop drinking ... or drink a lot more.

They make special vice grips that grip 3 sides of a hex head. they work on the hose fittings, don't tighten them to much they will crush the fittings. Use a 6 point socket on the bleeders and be careful thay are easy to brake. Use lots of penetrating oil.

kamarchi it will be a few days before I will be able to get back out where the car is, my grand kids are staying with my wife and me. I will get some more pictures and poke at the seam with a screwdriver to see if is any good. Do you have a picture of the part that you want cut ?

Gavin, you may want to look closer at the firewall pic. It looks different RHD vs LHD.

It may be a few days before I can get any more pictures, Gavin what part of the firewall do you need? gilltech I have never seen one like it either, it may not be factory.