Scotty_Rah

Hi mate, I may have one of these spare. i'll check this weekend for you.

Somebody please save this block! These part will only get harder to come by if Mark keeps scrapping them

PM'd

interested in the front spoiler - would like to see photos.

PM sent re Glove Box Door

Congrats Pete

Hi guys thanks for the info. Unfortunately i've had very little time this weekend to get out an work on my car, as I had my mother up from Tassie visiting. I'm going to try to allocate time after work to do the checks. I'll try to document as much as possible and relay back to here. Thanks, -Scotty

Where do i find the fajita? Is that located near the indicator fluid reservoir? - when i checked the dimmer, i unplugged the terminal to it, turned my headlight on and checked both terminals(not knowing which one was ground) I also checked the terminals on the back of it too.. - I have the wiring diagram in my manual and also downloaded one from Atlantic Z , but i don't really know how to interpret it. it kinda makes sense, but is a little overwhelming. - the warning light on the dash that is connected to the handbrake switch. -Scotty

Thanks gents, You have given me some stuff to try out over the weekend. I will report back after I've carried out the checks

Well.. I've searched for a topic on this to see if any other people have had issues, and didn't manage to find any answers to my problem. Sooooooo..... Help please! I have been trying to figure out why my gauges aren't lighting up when i turn my accessories or headlights on. To save some time, i'll list the things I've already tried and observed. 1. I have tested all my fuses and fusible inks with my multi-meter - my fusible links look real sh*tty but they are still passing a current 2. I have removed my smaller gauges (clock, Volt/fuel gauge & temp/oil) checked the bulbs and wires. My fuel gauge and volt gauge is the only gauge that gives me readings. The rest I don't think are hooked up to my engine as It's an RB30. 3. I've turned my dimmer up and down. - I tested this with the multi meter but it didn't give me any readings. I unpluged it and tested the terminals inside and still no reading.. Whats that all about? 4. my high beam looks to have been modded to a floor switch next to the clutch pedal. the wiring has been re-located to this. .... perhaps this might be where my power to the dimmer has gone to?? 5. When i put my high beams on the high beam light will light up, as does the brake light. 6. My Taco doesn't work.. not sure if its been wired into the RB That's about everything I've done and noticed. I've got some photos of some of the above mentioned things..

Hi Lurch, if bsmith555 passes on this I'm interested.

Is that a washer motor i see in the last picture? is it still available?

Thank you Michael This is very good information! I think it might be best to go for the OEM cable/adaptor. I've checked out eBay and the stuff there looks cheap and nasty.. I'm currently in the process of changing my water temp sender. the old one got stuck in real good and wouldn't come out, so i'm having to drill it out and tap in a new thread... uhhhh its ugly but necessary. I just need to know that the ecu is picking up the water temp and its not going to over heat. I need to also wire in the dash gauge somehow too.

the ecu came with the car and i know nothing about it and the manufacturer offers no help what so ever.. looks like the below. I've down loaded the program from their website but dont have the cable to connect so that's another thing i need to source..

looks great Craig! looking forward to getting it back and installing it

I'm after a AEM Wolf 3D controller like the one pictured. I'm hoping someone has one spare perhaps..

+1 for this too..

Hi Mate, Not sure what year it is just yet, I assume 74/75 - VIN number is RS-30-0110069 if that suggests anything? 75? It's on its way from Perth to Sydney, I never thought to ask what year it was.. The guy that sold it to me says its missing all together. other than a few bit to fix up the car is pretty nice Hi Alan, Would be interested if you're willing to part with it. I might be able to frankenstein something together perhaps. - Scott

As the title suggests I am after a window regulator for the passenger side. If anyone has one they want to sell PM me or call 0431929618

This has now been sold.

More pics

G'day, I've decided to sell my 2 seater project Zed. I feel that I may be in to much over my head with this one and don't really have the skills to complete her anytime soon. selling her has really been a tough decision to make but I hope its for the best.. Please see details below and if you are interested and want to know anything, please contact me with the details below. I'm in not particular rush to sell. Asking price might look like its overpriced but I have a lot of spare bits and pieces that come with it - including replacement body panels a new roof (to replace the sunroof roof) and the RB20 engine. I believe it owes me at least this much. Model: 1975 260z 2 Seater, . Location: Sydney NSW (Baulkham Hills) Price and Payment Conditions: $9000 obo Item Condition: Needs some body work - Very little rust Body: Some Rust, Damage - has been in accidents in its life, repairs were done but not to the greatest of quality, Where - hit in the RH rear and the RH side front - as I mentioned both repaired and body still looks straight. Mechanical: Rolling Shell, Requires towing, Bring a ute/van for all the bits and pieces and spares Registration: Not registered.. Extra Info: Vehicle came from WA - comes with all interior, bits and pieces - lots of spares and an RB20det engine (only done 55,000Km) engineered to go straight into a Zed Contact Details: PM me or Txt/call 0431929618 to arrange viewing or questions. Photos below..

Hi mate, Not really. Anything in particular you were after? I might have it.

Aw yis! .. I've been wanting to do this for so long and now its only minutes away from me!

I have a lovely tan coloured coupe one...