44014

And for rear control arms contact zcar63 he makes them and are fantastic quality. Deusex has the TTT rear arms and the quality is fine. I only went with zcar63's for the design of a true A arm over a H arm design. Cheers Doug.

http://mcasuspension.com You want to talk to Josh, Murry's son. Josh has done a couple of of Zeds now and I have driven deusex,s 240 with them onand there a nice thing. He will let you pick what ever spring rate you want. redblue@mcasuspension.com Is Josh's email, just tell him Doug mentioned him to you and he will know what your after. Cheers Doug

We call it the man cam, are you man enough? Ha ha. It's not to bad off can still has reasonable performance but would need triples and a good exhaust as minimum to run it.

Last chance! Removing from the car this weekend then going on scumtree.

Ahh Didn't take in the fact he is doing a turbo conversion. yes my cam would be no good as all your boost will blow out the exhaust.

I have a healthy sized cam with lash pads and rocker arms to go with it for sale? Cam is a Ivan Tighe 369C that i have just installed and basically run in only. Driven car 7km with the cam in the car was brand new when installed. Still in car only selling as have just purchased a L28 injected turbo set up. $350 plus postage. Will need to get short valve stem seals and aftermarket springs due to the amount of lift exceeds the stock springs capabilities. Cam pulls from 3500-4000 ish rpm I have revved my engine to 7500rpm and it was showing no signs of running out of puff and has a nice lumpy idle. Cheers Doug Link to cam specs http://tighecams.com.au/profiles3/nissanlseries.htm

And in au dollars is more then Mca which is a far superior product imo

Otomoto will supply coil overs, not fit them.

Mca have done 2 of the garage Sanmaru cars now and are about to receive myn as soon as I remove the suspension This weekend. You want to call josh. Cheers Doug.

Bump! Comon guys! $650 for king springs and adjustable shocks. Will list on gumtree and ebay next week if no interest.

Just paid $900 and a swapped a set of 40mm sk carbs for a complete set up from pumps to exhaust with ems ecu and rb25 turbo

All good,found them.

Where can I get some of these Delrin offset rear inner control arm bushes?

Yep koni red shocks. Twist the shaft and it makes them harder/softer

Full set of koni red shocks King springs sl for 240z or early 260z $650 located brisbane south. Picture is how the my car sits only replacing as having coil overs made. Cheers Doug Oh for three 2 two for two 9 five six

pm sent

Same all my zeds have been like this. Is very annoying when trying to get wheel in that just fits on one side and scrubs on the other, as i am finding out at the moment..

I have recieved no reply?

Ben, Could i get a quote on a carbon 432 style rear spoiler for a s30 please shipped to brisbane city. Doug

https://datsunspirit.com/products-page-2/engine-parts/

Ready in time for the nationals? And what are we doing with rear brakes? Getting the custom bracket made and mounting a brembo handbrake caliper or r31 disks and calipers for now?

Pm sent

Pm sent

Linkages will fit just about any set of carbs..

Pm sent