Clarky93

chasing a big cam for l28et turbo for 500 to 600hp build

thanks I spoke to him today got inlets valves of him but unfortunately he has no exhaust valves who else I could try in Australia for just exhaust valves ? 38mm valves

hey I'm after some big inlet and exhuast valves for a l28et build p90 head. just seeing if anyone had some or could point me in the right direction for some. before ordering from the states or rhd thanks.

I was very surprised it worked with no manchine work. I took it out to qr couple weeks ago with no problems VID_130380202_130136_907.mp4

I might keen on one, but what's the condition of them ?

wtb 240z flares good quality just checking before I order some off topstage or rhd

I'm very surprised it worked out l28et on e85 Is such a pig to drive received_663533518086833.mp4

welding it hopefully it works haha

dumpy fit before I worked out where 12 degree was of the block

that would have been hard! I was going to try and make a jig up with a grinder but couldn't come up with anything did you tig weld yours ?

I came up this way to cut it, I'm very surprised it cut so well haha

hey guys, i thought i would post my l28et build makes 450hp/720nm i think the head ran out of flow we try adding more boost it didnt do anything. The tuner said the rear housing is 2 small ".83"or the head won't flow no more l28 block F54 stock l28 crank, spool rods. bored out to 88.5mm with kameari forged pistons , kameari damper p90 head 2mm mls headgasket the head been shaved two or 3 times head is pretty stock apart from a very small port and polish, cooling mod and heavy duty valve springs kelford 225lb the cam is a stock cam been grind to a sports cam has all the new efi stuff haltech 750, cas, ls1 coils, 1000cc injectors e85, g30-900 im looking at maybe porting the head abit more and installing a cam to see if it can hit the 500 hp any advice would be appreciate