taylor

Hi Sean are these still available?

The indicator and the light stalks are on opposite sides , I have both LHD and RHD cars. The light indicator has a round hole , and the indicator slot is rectangular. Probably no reason why you couldn't ulter it with a dermal or cut off wheel.

I'v been meaning to add this for the longest time now. HS30789. A project to be finished one day. Want to do the ZG thing but can not bring myself to cut the guards.! So it's back to original!

My 71 in my avatar had a vinyl roof as well, Buy the way Gav 789 is the chassis number.

It had a vinyl roof !

I have removed these pieces, and you will find they will go back on with not too much trouble! being stainless they have a bit of memory so they want to go back on the same way.[ if they are not seated properly, then it will appear too long! ] The join is at bottom in the centre, start there to remove and end there to reinstall . Just use a rubber mallet to seat them back into place.

Here is a 5 speed button I made, if I can get my mould sent over to me , I will make some more. They are not perfect but I think they turned out ok .

I bought a lot of 4 speed knobs (10) from the states as I couldn't find a decent 5 speed , I manage to find a really nice 5 speed button to make a mould from, thanks to another member in Brisbane. Injection moulding would be the way to go as making them one by one was a slow process, and trying to get rid of all the air bubbles was my greatest challenge . I don't go home as much as I would like , and I miss my zeds as I have 3 sitting in the shed. Happy to pass on my notes if anyone wishs to make their own.

I made these 5 speed buttons with some degree of success , however all my moulds are in Australia and I'm now living in Vancouver. If I get back there this year I will make some more .

http://www.gumtree.com.au/s-ad/burwood/cars-vans-utes/1976-datsun-fairlady-z-red-manual-coupe/1070728688 I known it has been stated that Edward lee doesn't known his ass from his elbow! I think confirmation of this, would have to be the new 16" watanabe's on this car . [ i believe they are mounted wrong]

There is another nut further up on the bracket , higher than the welded bolt , from memory 12mm or 14mm. Very hard to see! That's how it is on my 75 260z.

Pm sent

I don't want to rubbish the company(top stage) but after 2 purchases , flares and the gnose , don't waist your money.

I purchased that beaver section from the zed store while I was in Vancouver , travelled home on air Canada with it as carry on. Fits up reasonably well .

I have the gnose and the flares from top stage , I would not recommend them for both of these products , they require far too much work to make them fit correctly . Very rough I have some spare scoops if you need one .