Riceburner Posted April 27, 2015 Posted April 27, 2015 Unfortunately I'm out Nato, too many out goings at the moment Quote
nat0_240_chevZ Posted May 26, 2015 Author Posted May 26, 2015 ok, guys, Just updating and advising all rails have been cut, hope to form up and have ready for despatch this/next week. all those that are in PM me, or ill contact you directly. Only a few spare sets at this stage pending confirmation. I will repeat these are only for the 240z, and are 'Full length' Floor rails, from TC mount right to the back of the floor and connects up-to the rear sub-frame (front diff mount/LCA mount box section) Cheers Guys. Nat0 Quote
Iceberg Posted May 28, 2015 Posted May 28, 2015 Hi NATO, any chance I co of have Gareth's rails since he has dropped out? Pm sent. Found nice 240z but the rails and battery tray have more holes than swis cheese. Quote
nat0_240_chevZ Posted May 28, 2015 Author Posted May 28, 2015 lots of PM's sent out to those with 'Indicated Interest' Got stuck At 10 pms and locked out ..... 'Jap metal' I didnt get a chance to reply......Ill send you one shortly. Cheers Nat0 Quote
Administrators gav240z Posted May 28, 2015 Administrators Posted May 28, 2015 lots of PM's sent out to those with 'Indicated Interest' Got stuck At 10 pms and locked out ..... 'Jap metal' I didnt get a chance to reply......Ill send you one shortly. Cheers Nat0 Locked out of what? Did you hit some limit? Quote
reverendzed Posted May 28, 2015 Posted May 28, 2015 Happened to me also Gav when I was sending PM's for the BBQ we had a while back? Quote
Moderators PB260Z Posted May 28, 2015 Moderators Posted May 28, 2015 Locked out of what? Did you hit some limit? Is there some form of spam blocker in software ? Quote
Administrators gav240z Posted May 28, 2015 Administrators Posted May 28, 2015 Oh maybe it's a flood limit, sending too many in a row. That's to prevent spammers from sending everyone messages on the site. Should be able to send more once some time has passed. Quote
nat0_240_chevZ Posted June 1, 2015 Author Posted June 1, 2015 Rails have all been folded. Just need to firm up delivery /freight costs to some of you and then get them on their way. Any Qs please advise. Nat0 Quote
nat0_240_chevZ Posted June 1, 2015 Author Posted June 1, 2015 NOTICE ALL BUYING RAILS. Please note the acc# supplied, is incorrect, do not make any payments until I have advised the correct last digit. sorry, I am an Idiot...must have been tired!!! nat0 Quote
nat0_240_chevZ Posted June 3, 2015 Author Posted June 3, 2015 ok, now thats all sorted, please not freight bookings have been made for those who know who you are. REMEMBER, you must post pics up of your install, when you get around to it. this round has the lil weld in infills held nicely together by a little metal frame (like a car/plane model kit no glue req'd ), taped to the insides of the rail. I look forward to your public feed back. Thanks to thos whom already have posted up their install pics, namely Billy & Sinisha. Cheers Nat0 Quote
RB26DETT Posted June 8, 2015 Posted June 8, 2015 Nato if there is a left over pair I am interested in a set for a 1971 240z. Thank you, Cuong Quote
nat0_240_chevZ Posted June 9, 2015 Author Posted June 9, 2015 Hi Cuong, Ill let you know, currently forming up the front rails for those who wanted the hole hog. Its hard to say at present, but ill be in touch to advise if there is likely any left-overs. I am surprised, as I even made a couple of extras and these may already have been spoken for. Cheers for the heads up, at least i know ive got you in reserve. cheers Nat0 Quote
RB26DETT Posted June 9, 2015 Posted June 9, 2015 Ok thanks Nato I'll wait and hear from you then. Quote
Administrators gav240z Posted June 11, 2015 Administrators Posted June 11, 2015 My rails arrived today, hooray! Will document their install for sure. Quote
nat0_240_chevZ Posted June 15, 2015 Author Posted June 15, 2015 Sorry all, been sick. Flu, then cold then a throat, can't get a break. But just pulled a late night to get the front rails underway, Still some work to do on them but the floor support rails are ready to go. I'll msg those guys shortly. Nat0 Quote
nat0_240_chevZ Posted June 24, 2015 Author Posted June 24, 2015 Spare set available, let me know if you need. Nat0 Quote
nat0_240_chevZ Posted June 24, 2015 Author Posted June 24, 2015 Thanks Richard. I can't believe how quick they are all getting delivered..... Cheers for the update. Quote
Jap Metal Posted June 24, 2015 Posted June 24, 2015 Received my ralis last week Just unwrapped They are Top Quality and workmanship Great job Nathan Will be installing in a few weeks Anyone thinking of buying a set get onto them asap Thanks again Nathan Quote
RB26DETT Posted June 25, 2015 Posted June 25, 2015 I'll grab the left over set Nathan, I've replied to your PM. Thanks, Cuong Quote
Hurtle Posted July 18, 2015 Posted July 18, 2015 I like the look of these a lot! I've put a link onto Z Club NZ forum to let the Bro's know about them too! Quote
nat0_240_chevZ Posted July 20, 2015 Author Posted July 20, 2015 cheers Hurtle, networking always pays off! cheers Nat0 Coung, Have you had a chance to check the rails out yet, after they arrived? Which beast will these baby's be going on your yellow RB26dett Monster? do you still have this car? Nat0 Quote
Scotty_Rah Posted October 3, 2015 Posted October 3, 2015 Hi Nat0 Was wondering if you have been looking at making any 260 2 seater rails at all? would you consider doing this as a one off? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.