Jump to content

nat0_240_chevZ

Members
  • Posts

    864
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by nat0_240_chevZ

  1. (guessing that means no larger valves!). So if you were smart, you would bore out the allowed 1.5mm, giving you about an extra 80cc of capacity. Then you'd use flattop pistons to bring up the compression (which incidentally would probably lose most of the displacement increase), and port the crap out of the head, to match the big and scary cam you just put in. Set of extractors to complete the picture, and you've got a pretty angry motor starting to form up. flat top or dished has no effect on displacement. just compression volume. stroke & bore is the only thing that governs this. Peters cars are all about less is more, less porting to keep intake velocities high. combustion chamber shape and cam is moreso what hes keeping tight lipped. the 2.8 + litres is a bit of a blur of the rules!!, as is the intake and head choice. nothing is ever what it seems on petes cars. i also am aware his son bens car is pumping out 260hp+ from the L, with throt bods and motec!, these motors love to spin and the bigger stroke is not always the way to go. I know a couple of people that know more about what he does run, but thats why he is so succesful as he doesnt tell all to anyone, one thing i do know is that the piece of crap that a members here ,ate sold over here was a bucket no matter what, pete waived his wand and got it running like silk, YES silk. even i was astonished with the response and tune fre the early hitachi/su type carbs. Peter really knows his Z cars and L series motors, and could teach alot of the eastern state z specialst a few hundred things or 2. not bad from some guy out in the hills who reapairs lawnmower motors!!!! nato
  2. first half of the tank gauge reading is only about 30% of the tank volume, hence the 1st half always goes quick!!!
  3. GOOD STUFF JOHNNY, bout time you put some of the pics up, im sure it will silence all that brag autocentimetre's as thats how they compare, 100th of a meter!!! Ive seen yours and they are top notch in comparo, and that was still in the very early stages, will have to come and have another look. I used to think highly of autometer but that was mainly due to its rep, not the quality of their units, and yes they are from the stone age. even their best! dont you worry bout my gauges as i reckon i got some bribing power for you to sort me out! lol and now that the VH is going in ie nissan ecu (your specialty!!) good to see some more completed pics, and damn your car makes me nearly snap my neck drivg past your work, driving along and catch a small glimpse of what looks s30 and snap!
  4. yea sorry if i hurt anyones feelings!!! lol yea lets just say even with my 240z 2 seater with a chev also, i still feel inferior to graigs monster torque twister, he needs the extra weight to somewhat support all that twist! just a mental thought/pictur, craig driving down the road with one front wheel off the ground due to chassis twist doing a big launch, and having to nurse it home due to all welds breaking and the only thing holding it together being the rear swaybar mounts. oh well day dream over!!! Personally i like twitchy, which is what the shorter wheelbase does, more like a go kart, in fact i like the gemmy wheelbase even better, now that thing feels like a go kart with 4 doors!!!
  5. Keep an eye out, as it will start as a very small vibr under big load and then slowly get worse then rapidly get worse, then Look @ bearings etc.
  6. They are heavy ind type but there is more the auto type which they dont have the tech data avail well from this site anyways. But the kgf/m is actually deceptive you have to x by 9.81 to get N/m so what ever you se in kgf/m times by 10 and your on the money, yes those particular items were only rated to about 6-8k, but ive read a catalogue recently where the were rated to 25k revs, and something stupid like 200kgf/m torque and they were about 288$ + tax!!! cheap angular power transmission there i tell ya,( remem x by 10 for Nm.) but even saying using a CV you will still have the same problem if there is slight off centre drive, ie output shaft bearings in trans and same on the diff, if under load the shaft ofr bearings let the shaft deflect slightly then you hammer the revs it will cause a CV to fail pre maturely also. And this is also the reason that i think this is why the 1310 unis went also. remember the engine torque is multiplied by your 1st gear ratio and then by your diff ratio but the DS only sees 1st gearXengine torque to the limit of traction anyhows!!! Informed yes, homework not really just thought id post you a link to this type of power transmission items, i have studdied and done plenty of projects requiring these sorts of items along with shafts and bearing loads etc. nato
  7. 14k sounds reasonable, remember, i know its not much, but less of these were made than the 240z!!! doesnt mean that mean rarer??? althought the early 240z are rusting like no tomorrow so i dare say there are more of the 260s around excluding the station wagons with wings and a lump in its spine!!!
  8. let me know if the sale does not happen, a mate of mine would be interested.
  9. craig, have you had the rear bearings on your trans / g/box loked at?? im not sure if your familiar with the vl auto problems with that small vibr to begin until its gets worse and worse esp under load??? DS cv's are very common, look at all comonhores they have a centre bearing which is essentially a constant velocity joint. thing is with a uni, your only able to transmit what that small + shaped centre can withstand under shear / due to torsional loading, also the endcaps of the unis tend to wriggle a bit underconstant abuse which then lets the DS sit slightly off centre and when you can it you feel the 'offcentre' vibr, all it needs 0.1mm play /slack/ lash side to side and youe will begin to feel it. Also the speed variation @ a given angle is detrimental to other drive components, ie when a uni is transfering torsional load @ any angle other than dead straigh it actually speeds up and slows down in respect to its drive to driven counterparts. CV's are the modern version of the uni joint, yes the uni is still used but this is more of a case of minimising production cost. have a look @ all late model nissans with their rubber triangle front uni type joint, a cheap and rreliable method of transfering torque with a built in cush drive assy. i personally would exhaust all other option before replacing something which was probably never the cause in the first place. as unis will wear and fail, just like all other items that are deemed to have a limited service life. Yes cvs do to but just do a giggle search for maybe a beter alternative, but all thins aside it may not be the uni's and shaft causing the problem try this link http://www.conbear.com/PT%20Shaft%20Couplings.htm or http://www.conbear.com/CVJ%20Industrial.pdf
  10. SOLID ROUND BAR WILL NOT INCREASE TORQUE TRANSFER (Sorry bout the caps!) nor will it twist less (much anyway), its the outer most fibres of a round section which transfer all the load anyways hence they way driveshafts are made already. what increases torque transfer capacity is the wall thickness and the Overall diameter of the tube not making it solid. I would highly recommend ditching the unis joints all together and opting for the expensive route of CV joints instead, they have a much higer torque transfer and do not change rotational speed depending of angle as compared to unis. also they allow much more angle of mis-align before starting to overstress them. craig i still feel you tranny and diff output/input alignment exceeds that allowable for a uni, i also have a SBC in one of my Z'z and i feel the geometry is not ideal, so i made my own tranny crossmember to lift the trans output a lil. I understand your torque output is considerably high than what mine is outputting, but ever since ive had no dramas dropping R to D for stupid burnouts etc etc, but the only thing the prev owner said ever broke was a moustache bar mounting pin which attaches to the body, only woble i get is from the tyres delaminating and causing vibration there. feel free to hit me back with more info Q's etc. nato
  11. make an offer, remember i have to remove, pack and send, which is most of the work, not so much the mounts themselves. condition:- still attached to engine and g/box! used will have to check. now that i think about it, im not sure if the rubber section is on the actual engine mount. just thes mount section which bolts to the block and top half of the rubber!
  12. how much? nato
  13. have the rb30 (ex vl )mounts, eng & gb ox, used if interested.
  14. series 1 had unis, s11 has the cvs in r180 and r200!
  15. see previous page with the pic of the rb head with l28 gasket on top of it!!!!!
  16. v.nice car.... not sure if the owner would appreciate his # plates all over an internet forum but!! maybe mod the pics??? but yes very clean exaple, and nice front spoiler. nato
  17. have a 3.7 complete from 260z???
  18. here is a rough rb sketch in cad. not scaled anywhere near what it should be (7850mm long hahahaha) but i think you get the idea. ill get the L6 block deck done soon, then superimpose ans match the scales of the 2. will give a good idea on what needs to be done also note the 2nd pic off hybridz, an l6 gasket on an rb head, as you can see bolt and bore spacings are bang on. oil and water galleries need a tickle on both head and block, more so on head. also note my sketch is from an rb26 not a 20/25 etc as they are slightly different in areas. nato
  19. yes give us pics, and ill see what i can do. can you also have a ruler laid over the pics, one in each direction. take pics perpendicular to gasket. allows me to dxf the photo, and ill see what i can come up with. nato!!!
  20. JESUS!!!! give the fellow SOME ideas to work with. the rb head could be done, not easily as in way of bolt up, but can be done. block leaning over is no dramas for the rb head or injection (depends if youre after carbies im not sure, if you are you just need to machine half of the eqiv angle on the intake/manifold faces and the other half on the carby/intake side of the manifold) the main problem with the rb to L swap is the oil and water galleries at the rear of the block. Now both L and RB have an oil drain port, problem is the rb oil drain is massive. and overlaps an L water gallery. also the rb water galleries down the side of the block are a large curved oblong where the L's are a very small oblong. I have often tempted to make a stencil for those that want to meild the 2. it would be like a head gasket but it would be somewhere in the middle ground of the metal meat needed to get them to mate better. trace the stencil on both head and block, the grind the L block with a die grinder with a tungstun carbide burr and weld up the rb head and re shape all ports with the same grinder. then test and face the head and block. (problem is when replacing the head have to do it all again) as for the cam drive..... well this is not as hard as some make it sound. laser cut 2 sprockets and machine the necessary boss's and bore size to slip on the end of the cams, then fold up a sheet metal camcchain cover that bolts to the front of the rb head (like the plastic ones that the rb have). Make custom gaskets to seal the L timing cover to the sheet metal cover to enclose it fully (imagine a sheet metal plastic cover instead of the plastic ones, but totally sealed to hold oil and crankcase pressure/vacuum). Now this would also require a custom headgasket, (same as the stencil) but hell they are not hard to get. i can put you onto a number of companies willing to do so. Also if there is anything i have missed just throw it at me and ill try and explain. cheers nato
  21. i have developed up the complete, under floor rail, up to the castor rod chassis/ floor support rails, i can make them in 1.2->2mm Zinc anneal sheet, ill have to price them up as i have to make them at work, but can be an excellent way to stiffen her up with fresh metal, i prefer to tig stuff when it comes to cars. Mig is ok but need to poer her down. nato
  22. not the best but if doesnt have a starter then try the socket on the front pulley and comp tester (held by another on the front). use a ratchet and get your mate to go like hell, wait till you get about 3 compression strokes = 6 rpm per cyl, ouch. this reading will be lower than that on a car/motor with a starter motor. see how you go otherwise, try one with a starter motor and then with the ratchet, and see what sort of margin you get as some idea of the difference between the 2. nato
  23. not from a 300zx, the single turbo's were an import of the various nissans that were released ie leopard cima gloria. do you want a straight or bent (V6) motor, both will fit, less room around the V but no dramas still (well beside the usuall dramas of doing the engine swap.) id say go an rb20det, cheap, plentiful, easy upgrades etc etc and is still a straight 6 for a similar formula to the original car. nato
  24. yea but its a 260z same as aus, but lhd with an l28. we had the 260z same body etc here at the same time. r200's were in most 260z from mid 75 onwards, just a guess dont flame, but u can see what i mean nato
×
×
  • Create New...