Moderators Zedman240® Posted July 5, 2010 Moderators Posted July 5, 2010 Just seeing if there is any interested parties for a complete setup, that is everything needed to fuel inject your L series engine. Details are: Wolf V500 ECU, EFI Hardware 45mm Throttle bodies X 3 Bosch Fuel pump and 250cc injectors Surge tank Fuel rail 280ZXT distributor (just being used as a CAS) Wasted spark coil pack (from V6 Hyundai model) Redline manifold with all linkages Loom with sensors Basically everything needed to run the engine. Many more details To purchase everything new, will be over $5-6000 and the difficulty chasing up the 280ZXT dizzy! as they say, everything has it's price, so just testing the water...
Roberto Posted July 5, 2010 Posted July 5, 2010 I am sure there will be lots of interest depending on price. What are you after?
C.A.R. Posted July 5, 2010 Posted July 5, 2010 What would you replace it with, Dimitri? Surely no SU's... I've love the induction & coils (as i have eveything else, but I'm betting you dont want to split it all up...
Zeddophile Posted July 5, 2010 Posted July 5, 2010 I am sure there will be lots of interest depending on price. What are you after? I read the orginal post as make an reasonable offer (with respect to the replacement price), and it will be considered?
stevo_gj Posted July 5, 2010 Posted July 5, 2010 It might help you sell it if you posted a youtube video of the engine running? (and satisfy my curiosity )
RB30X Posted July 5, 2010 Posted July 5, 2010 It might help you sell it if you posted a youtube video of the engine running? (and satisfy my curiosity ) And explain why you are selling it. NA RB25 to NA L24 to
Moderators Zedman240® Posted July 5, 2010 Author Moderators Posted July 5, 2010 I read the orginal post as make an reasonable offer (with respect to the replacement price), and it will be considered? Spot on....offers of around 3.5K and up will be seriously considered... And explain why you are selling it. NA RB25 to NA L24 to I don't think I'll be doing much in the club events anymore so a setup like this would be suited to a healthy L24 to a stroker 3.1. Plus my zed is hardly driven so someone else can have some fun with it. There are some videos of it running on youtube now... What would you replace it with, Dimitri? Surely no SU's... I've love the induction & coils (as i have eveything else, but I'm betting you dont want to split it all up... Unfortunately yes...I'll be whacking on a set of SU's for now just to keep the zed going. I'd rather sell it as a complete ready to bolt on and run setup. I've done 3 of these setups with each zed I've had and I can do it all again...Its the ultimate set and forget system I've seen. Cold starts are no problem at all..but for now I can let it go.
dalee Posted July 6, 2010 Posted July 6, 2010 Dale - no I can't do it Z - go on, you know you want to Dale - but but .. Z - there are more of us! Dale - only one of u runs Z - ..................... I digress, good luck with the sale Dimitri.
Hunter Posted July 15, 2010 Posted July 15, 2010 3.5k plug and play dimitri? I have a set of Su's that run sweet as without chokes hooked up. Rev had spent $900 on them to get them running sweet. They are smaller flat tops, but have side float bowls. ( possibly off a 200B?) but they run sweet all the way through the rev range on my L28 MRP69, Mayhem and Rev can tell you how well they run.
luvemfast Posted July 15, 2010 Posted July 15, 2010 OMG Dimitri What are you doing to me? I'm not ready for this just yet, but getting closer............ Sell it next year
Recommended Posts