zzzzed Posted July 20, 2014 Author Share Posted July 20, 2014 Finally the rb25det is in its final resting place. There is still a lot of work to do yet as it is only sitting there I find it strange that I am using the same engine mounts as I was using on the rb20 but the engine sits about 10mm further forward. I happy about this because the gear shift is now in its correct position. Quote Link to comment Share on other sites More sharing options...
77260Z Posted July 24, 2014 Share Posted July 24, 2014 Looking awesome mate. It's going to be a weapon when it's finished! Just throwing this out there but have you thought about painting the valve covers? I think it'd look great in the body/engine bay colour personally but even a polish would bring them up really nicely. Quote Link to comment Share on other sites More sharing options...
vorn70 Posted July 24, 2014 Share Posted July 24, 2014 Looks like it fits like a glove. It makes things easy when the mounts line up. Has the rest of the fit been fairly straight forward. Looking good mate. Quote Link to comment Share on other sites More sharing options...
zzzzed Posted July 24, 2014 Author Share Posted July 24, 2014 I plan on painting the rocker overs later on. For now I just want to get it back on track so I can go racing. The fit up has been pretty straight forward. I havnt worked out the wiring just yet. It is booked in to jazmac next week to get wired up the tail shaft is in at hardy spicer getting new yokes. So I am hoping by next weekend it should be drivable. Quote Link to comment Share on other sites More sharing options...
zzzzed Posted July 29, 2014 Author Share Posted July 29, 2014 It's alive!!!! Thanx to Steve at jazmac performance. Video to come. Quote Link to comment Share on other sites More sharing options...
Moderators PB260Z Posted July 29, 2014 Moderators Share Posted July 29, 2014 It's alive!!!! Thanx to Steve at jazmac performance. Video to come. :) :) :) Quote Link to comment Share on other sites More sharing options...
zzzzed Posted August 9, 2014 Author Share Posted August 9, 2014 It's a runner http://youtu.be/KrBg1XFHIMQ Quote Link to comment Share on other sites More sharing options...
Ledge Posted August 9, 2014 Share Posted August 9, 2014 Hope the engine runs better than your link Knackers Quote Link to comment Share on other sites More sharing options...
zzzzed Posted August 9, 2014 Author Share Posted August 9, 2014 Well that sux Quote Link to comment Share on other sites More sharing options...
zzzzed Posted August 9, 2014 Author Share Posted August 9, 2014 Ok this link should work Quote Link to comment Share on other sites More sharing options...
Ledge Posted August 9, 2014 Share Posted August 9, 2014 Sounds good knackers. WTF was that thing at the start and end of the video though. jeezuz.. ;D Quote Link to comment Share on other sites More sharing options...
Roberto Posted August 9, 2014 Share Posted August 9, 2014 Good work. You must be excited! Quote Link to comment Share on other sites More sharing options...
zzzzed Posted August 9, 2014 Author Share Posted August 9, 2014 Sounds good knackers. WTF was that thing at the start and end of the video though. jeezuz.. ;D You are jealous of my beuty Arnt you. How is yours going Roberto? Quote Link to comment Share on other sites More sharing options...
benny Posted August 9, 2014 Share Posted August 9, 2014 You are jealous of my beuty Arnt you. How is yours going Roberto? beauty* aren't* I thought they have spell check in SA? Quote Link to comment Share on other sites More sharing options...
zzzzed Posted August 9, 2014 Author Share Posted August 9, 2014 Arrrh gramma nazi! Yeh English was never my strong point, but meh! I don't care I am Australian not English. Quote Link to comment Share on other sites More sharing options...
vorn70 Posted August 9, 2014 Share Posted August 9, 2014 Sounds good Mick. A quick tidy up and she will be ready to roll. I'm a bit jealous you made such light work of getting it up and running. Well done mate. Quote Link to comment Share on other sites More sharing options...
zzzzed Posted August 9, 2014 Author Share Posted August 9, 2014 Yeh it wasn't to bad seeing it already was running an rb20det. Just a few mild changes to make the rb25 work. Quote Link to comment Share on other sites More sharing options...
zzzzed Posted August 30, 2014 Author Share Posted August 30, 2014 I managed to get some rego on the 240 today. I must say mechanical bugs aside. (All sorted now) The rb25det is a big improvement on the rb20det The torque is so much better. I won't try it to its full Potential until after I have it check out on the dyno. I have it Booked in on Friday for a check up. Happy days. Quote Link to comment Share on other sites More sharing options...
zzzzed Posted August 31, 2014 Author Share Posted August 31, 2014 Mmmmm plasti dip. Quote Link to comment Share on other sites More sharing options...
benny Posted August 31, 2014 Share Posted August 31, 2014 Mmmmm plasti dip. Its awesome stuff!!! easy as to touch up too! Quote Link to comment Share on other sites More sharing options...
zzzzed Posted August 31, 2014 Author Share Posted August 31, 2014 I figured if I don't like it I can just peal it off. Quote Link to comment Share on other sites More sharing options...
benny Posted August 31, 2014 Share Posted August 31, 2014 post up a finished pic Quote Link to comment Share on other sites More sharing options...
zzzzed Posted August 31, 2014 Author Share Posted August 31, 2014 You know I will. Quote Link to comment Share on other sites More sharing options...
Roberto Posted September 2, 2014 Share Posted September 2, 2014 Interested in seeing how the plasti dip turns out. Looks great in the photos. Quote Link to comment Share on other sites More sharing options...
zzzzed Posted September 3, 2014 Author Share Posted September 3, 2014 It locks even better in real life. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.