rb25240z Posted January 16, 2015 Posted January 16, 2015 Hello. Renovating my house and need to clear some parts. Sorry have no spare time to ship parts at the moment. Parts that i have dug out so far are. 240 z left and right front guards with nose cones welded on no lights. 240z hatch no glass push button welded over has electric strike. 240z windscreen wiper motor cover panel 240z left guard with holes for fender mirror looks original?? Been hit below crease at rear fairly badly shame as was a very clean panel. 240z left quarter panel bent at same time as above guard. The front corner from crease down is missing but the rest is all usable.NO MIRROR. Rx8 black leather interior front and back seats with door trims electric drivers seat. Not a zed part but taking up space. After about $100 for most panels they are all from my blue car in my pictures. Starting to blister so would need to be striped. The quarter panel think i payed $80 for. Bent guard free to anyone who is installing fender mirrors. And the Rx8 stuff $450. All parts at Acacia gardens NSW. Best to call or message me on zero four three four three one four eight three seven. Quote
rb25240z Posted January 16, 2015 Author Posted January 16, 2015 Also tear drop mirrors think off xy falcon excellent condition $50 If your after something ask have other bits waste gates fuel pumps etc. Quote
theremm Posted January 17, 2015 Posted January 17, 2015 Do you have a 240 tailshaft (or 260 2 seater!)? The slip yoke type, not flange. I'm in Brisbane although travelling to Sydney this weekend coming. Quote
Administrators gav240z Posted January 17, 2015 Administrators Posted January 17, 2015 Is the 1/4 panel early or late 240z? Does it have provisions for a vent? I could be interested in it either way. Quote
Triptych Posted January 17, 2015 Posted January 17, 2015 If you are willing to ship the left and right front fenders with nose cones to QLD I would be interested. Quote
rb25240z Posted January 17, 2015 Author Posted January 17, 2015 Sorry don't have any spare tail shafts. Gav the panel is the later type. Pm me your number if you want some photo's. Will give you a discount for liking rotary's With shipping at the moment I really don't have time. My life for the last month is go to work then pickup tools and renovate to 10 pm. Then up at 5.30 to start again. The shipping would not be cheap either. I sent a hatch to Brisbane a few month ago via pack and send without glass it was over $80. Quote
andyk_79 Posted January 17, 2015 Posted January 17, 2015 I live right nearby so am happy to pick up parts and ship to people Quote
andoi Posted January 17, 2015 Posted January 17, 2015 hi, you wouldnt have a spare brake booster lying about would you? Quote
HKSZ Posted January 17, 2015 Posted January 17, 2015 Hi mate interested in the left fender mirror? Quote
zeds4ever Posted January 17, 2015 Posted January 17, 2015 Hey Tryptych ,noticed Theremm is travelling down to Sydney soon from your way he might be able to help you out. Regards: Alan. Quote
rb25240z Posted January 18, 2015 Author Posted January 18, 2015 Changed the add , sorry the wording was a bit confusing. I dont have any fender mirrors just a guard with the holes punched in it for them. Thought it would be useful since there has been a lot of discusion about correct placement. It has been hit so would take a lot of work to make it useable. This panel is free so if you want it come get. Also dont have a brake booster. Found inspection lids and a grill. With shipping if the part is really needed i can send it in a few weeks once things are back to normal. Quote
vspecrob Posted February 23, 2015 Posted February 23, 2015 Still available... 240 z left and right front guards with nose cones welded on no lights Quote
Administrators gav240z Posted February 23, 2015 Administrators Posted February 23, 2015 I dont have any fender mirrors just a guard with the holes punched in it for them. Thought it would be useful since there has been a lot of discusion about correct placement. It has been hit so would take a lot of work to make it useable. This panel is free so if you want it come get. By the way mate do you still have this guard? I'm looking for measurements on where to insert the holes in the guard. I think they might be different left and right sides and perhaps not always in exactly the same place to the mm but if someone has measurements I'd appreciate it. Quote
theremm Posted February 23, 2015 Posted February 23, 2015 By the way mate do you still have this guard? I'm looking for measurements on where to insert the holes in the guard. I think they might be different left and right sides and perhaps not always in exactly the same place to the mm but if someone has measurements I'd appreciate it. Can't remember where I found it but if you like I can send you a photograph of the measurements I have saved at home I found on another forum where someone with a ZG measured the mirror locations. Mirrors are slightly staggered from one side to the other. Quote
Administrators gav240z Posted February 23, 2015 Administrators Posted February 23, 2015 Can't remember where I found it but if you like I can send you a photograph of the measurements I have saved at home I found on another forum where someone with a ZG measured the mirror locations. Mirrors are slightly staggered from one side to the other. Think you mean this right? http://www.viczcar.com/forum/index.php/topic,4316.0.html Edit and this... http://www.classiczcars.com/topic/7582-fender-mt-mirror-question/ It's ok I'll read those again. Quote
theremm Posted February 23, 2015 Posted February 23, 2015 Think you mean this right? http://www.viczcar.com/forum/index.php/topic,4316.0.html Yep that's the one. Saw it on another forum actually. That's what I referenced to drill in my fenders last year Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.