aaronjo Posted June 5, 2016 Share Posted June 5, 2016 Howdy guys! New owner of a 240Z and while the body works getting done the engine needs a rebuild. Looking at a complete ITB setup locally and so far have seen Otomotos OER setup and EFI hardware does a complete kit too. Has anyone here used either before or is able to offer any feedback on them? Or is there another kit available that's worth considering? Cheers! Aaron oldmates260z 1 Quote Link to comment Share on other sites More sharing options...
dat2kman Posted June 5, 2016 Share Posted June 5, 2016 Why not consider a regular triple Weber type manifold, get some bosses welded on top at an angle, for injector mounts, to point into backs of intakes, and just use three Weber or similar sidedraft carbs, purely for air control, with a TPS swung off one end. Control the lot with aaftermarket ECU. This has been done by a chapin Sydney, works very well! The injectors on the EFI gear is a long way from the intakes. Quote Link to comment Share on other sites More sharing options...
C.A.R. Posted June 5, 2016 Share Posted June 5, 2016 (edited) I ran the EFI Hardware / Speed Tech. 45mm throttle body kit with a Kameari/Harada manifold on my old L24. Great bit of kit, well made & was easy to set up.I know lots of other people using the EFi Hardware products with no issues or complaints. Edited June 5, 2016 by Lurch ™ oldmates260z and Hunter 1 1 Quote Link to comment Share on other sites More sharing options...
CBR Jeff Posted June 5, 2016 Share Posted June 5, 2016 I'm running efi hardware on my new engine that LCR are building. I decided to head in this direction for several reasons. Firstly they are a local (Australian) product, secondly a set became available at a convenient time and price, third I wanted the sound of triples and finally I have had quite a few cars with side draft carburettors over the years living at 600m above sea level and where winter temperatures drop to well below zero and summer temperatures eclipse 40 I was over the temperamental issues associated with carburation of this type in this environment. I want a car I can just start and drive summer or winter head to Thredbo or down the coast without the spitting and farting of webbers or similar. A couple of shots they are a bit like the ones Lurch had. oldmates260z, Zedhead and gav240z 3 Quote Link to comment Share on other sites More sharing options...
aaronjo Posted June 5, 2016 Author Share Posted June 5, 2016 Thanks for the feedback guys! I'm similar to you Jeff in a sense, had a 69 Toyota Corolla KE10 fitted with bike carbs running on e85. Lovely car, pretty quick but very high maintenance. I tended to break it more than drive it... Want to keep the build relatively period correct with a L28, sounds like carbies but with all the reliability of EFI. Aaron Quote Link to comment Share on other sites More sharing options...
CBR Jeff Posted June 5, 2016 Share Posted June 5, 2016 Aaron don't forget these cars were homoligated with EFI. So it is period correct. Jeff gav240z 1 Quote Link to comment Share on other sites More sharing options...
Triptych Posted June 5, 2016 Share Posted June 5, 2016 (edited) If you are looking at the building your own Racehead do a universal kit, They use to sell weld in injector mounts as well but I can't seem to find them on the website anymore. Unsure how good the quality is though as I haven't used them before.http://racehead.com.au/products-page/throttle-body-sets/6cyl-itb-set-with-universal-linkage-mechanism/ Edited June 5, 2016 by Triptych Quote Link to comment Share on other sites More sharing options...
Dionysus Posted June 6, 2016 Share Posted June 6, 2016 Am I looking at the right piece of gear on the EFI website when it states $4k That's quite a bit of coin... Quote Link to comment Share on other sites More sharing options...
dat2kman Posted June 6, 2016 Share Posted June 6, 2016 Pricey! 3 s/h Webers with manifold, and six x welded bosees plus injectors, less than half that! Re the EFI homolgation omment, the FIA only homolgated the EFI setup as used on 280Z/280ZX, only that would be "period correct" Its not a great setup, it needs a lt of internal work to get it running right for competition use. Quote Link to comment Share on other sites More sharing options...
aaronjo Posted June 6, 2016 Author Share Posted June 6, 2016 Problem is I'm not all that good around mechanical stuff so I can't do it myself. If there was someone who could make up what you recommended at half the price and still as reliable I've got cash waiting, lol! Sucks not to be a professional race car builder... Quote Link to comment Share on other sites More sharing options...
CBR Jeff Posted June 6, 2016 Share Posted June 6, 2016 (edited) Pricey! 3 s/h Webers with manifold, and six x welded bosees plus injectors, less than half that! Re the EFI homolgation omment, the FIA only homolgated the EFI setup as used on 280Z/280ZX, only that would be "period correct" Its not a great setup, it needs a lt of internal work to get it running right for competition use. I recal that some of the works 240s ran fuel injection. Some with the cross flow head and a some without. It would have been for group 4 I think?I'm convinced anyway :-). Edited June 6, 2016 by CBR Jeff Quote Link to comment Share on other sites More sharing options...
Administrators gav240z Posted June 6, 2016 Administrators Share Posted June 6, 2016 Pricey! 3 s/h Webers with manifold, and six x welded bosees plus injectors, less than half that! A set of 3 Mikuni 44 carbs reconditioned would cost $3k at least now. I recal that some of the works 240s ran fuel injection. Some with the cross flow head and a some without. It would have been for group 4 I think? I'm convinced anyway :-). There was certainly works rally cars and circuit cars in Japan fitted with mechanical fuel injection set up's. However I'm not sure what homologation rules apply if any. I think Alan (HS30-H) would probably be able to help there. Quote Link to comment Share on other sites More sharing options...
Gyra Posted June 7, 2016 Share Posted June 7, 2016 (edited) The current issue of Practical Performance Car has an article on fitting an EFI setup to a 240. http://www.ppcmag.co.uk/ Theyre using an Omex kit, which looks similar to the EFI hardware gear Edited June 7, 2016 by Gyra Quote Link to comment Share on other sites More sharing options...
Dionysus Posted June 8, 2016 Share Posted June 8, 2016 Got a quote back from a UK producer of these kits which came in just under 3k delivered minus intake manifold. Waiting on a US company to reply with theirs. Quote Link to comment Share on other sites More sharing options...
Dionysus Posted June 8, 2016 Share Posted June 8, 2016 A set of 3 Mikuni 44 carbs reconditioned would cost $3k at least now. It's a great comparison because I feel Mikuni carbs are increasingly in value just like the cars themselves. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.