Mr240z

That's cause Lurch's gone all soft on us....Harden the #@*? up big fella...

Sorry Zed dad, georgie started it "send him to bed"

Can i pull the main jets, emulsion tubes out without detuning the weber not that its tuned to start with. Mark i,ll try to check out the internals tomorrow if i can work it out. When i brought these Weber's about 10 years ago, I went though about 3 sets of everything jets, tubes etc and a shit load of johnny cash. And the fuel economy has allways been the same (shit house) If I sit on the motorway and plant my foot I can see the fuel gauge needle moving downwards. Does this mean I,m not getting the best performance out of my motor. And when i sort this out can i fit these to my L28 motor that i,m building from a L24 without going though this again. p.s I,m running BP6E NGK V-grove plugs with 10mm top gun leads

Pretty sure this is the 3rd time this has been posted Get with the times Georgie boy

Where's the pic of the new bonnet fitted.

Get it sorted, Where do I start When i put my foot down i can see a cloud of unburnt fuel out the back (grey to black smoke) I take it to a weber specialist (so he says) what would you say is the problem. Just read your post scootag and yes i do get alot for backfire and the plugs do fouled up alot

After 15 years of Zed ownership, I have done the fuel test. L24 with E88 head ported and polished, large valves inl & exh Mild cam for use in stock or near. stock engines. 58721 IN. 39/73. EX.75/37. 292. 292. 225. 225. 108 .495" .495". 3000. 6500. Medium street performance cam Triple 45 Weber's, 2 1/2 inch exhaust, 280zx dissy, MSD Ing, 5 speed 260z box And a heavy right foot. Got new speedo cable so i started the trip meter, added 30L fuel from empty Fuel level is just a tad above empty today and I,ve done 54.8 miles. Is this bad and what am I doing wrong. Good point = Its going pretty hard at the moment. Any comments would be welcome Pauly 30L fuel = 54.8 miles

BBQ & you boys could meat there.....Smart and Funny.

I,m with George on this one............Lapsash are great......But dangerous..

Hey mossy i got mine at mates rates, $1400 is right on the money. I dont think you will get them cheaper "new" than that. You pay for what you get, I love my new Koni's .Pay the money once and do it right. Konis will last you a lifetime (fully rebuildable) They are worth the money trust me. http://www.viczcar.com/forum/index.php/topic,3435.0.html

You dont take the headlight buckets of to change a headlight........................

spot on chris, I said it might go for maybe 10k + but i think it might be lucky to hit mid to high 4's Just a sheep in wolf's cloth's (might be wrong thou) we'll see in a couple of days

Micheal i found a place in NSW that sell after market tail light lens http://www.streetlens.com/ How To Contact Us....... mail : David Azzopardi Manufacturing, PO Box 420, Campbelltown NSW 2560 Australia phone : Australia 02 9824 6737 International 61 2 9824 6737 fax : Australia 02 9603 4390 International 61 2 9603 4390 email : davida@tailights.com Reply given within 48 Hours There's no price on the tail lens so you can ring them up. Datsun 240Z Clear front indicator lens OFF ROAD USE ONLY Cost : $76.00 each. Datsun 240Z Amber front Indicator lenses Cost : $76.00 each. Datsun 240Z Taillight lenses Grey housing and chrome strip NOT included Hope this helps......................................Pauly Mr240z

I demand 2 Scott's change their names - immediately How about they change their names to Lurch Snr and Lurch Jr And you in the middle the way you like it (Double adaptor) wink wink

Welcome Boltaction Billy, Love your name. How about a few pics when you get a chance. Sydney boy Pauly

Hey Scott the Sydney Zed boys are getting together this week ,You should come along Nice Zed, I threw a set of the chrome spokes rims away years ago, Doh!!! Anyway keep looking in the Sydney section Pauly Mr240z p.s I use a workshop in Sydney but do 85% of the work myself (mostly for tuning my triples)

jospef I dont think you know what there trying to do here. They mean if you need a special tool for a job ,eg spindle pin puller They will send the tool by post, you use it and send it back with some payment like postage to cover costs etc. If you were to leave some collateral that means sending money or your house for example though the mail and thats were it gets hard and time wise. So we have to trust each other to make this work. You break it, you own it or do the right thing and replace it. This is how its down on Hybridz in the states. p.s I think this is what were trying to do................................ Pauly

Datsun 240z 1970 car no. hs30-00406 car was reg in n.s.w. with 350chev motor.Since being taken of road has undergone considerable modifercations,including personally imported Lexus quad cam V8. This has been bore scoped and tested,has been rebuilt Supra 5 speed gear box with short shifter kit,Bell housing clutch etc. Has fitted lexus rear sump ,Full silvia rear suspention, G speck flaired guards,sparko wheels,Electric 300 Z leather seats, Many more other acc. Selling due to moving interstate and no time to finish.Car needs front engine mounts,drive shafts and computer. there are minor bits and peices needed. Will consider splitting car and engine. Too much to list any enquiries please contact Steve 0432768519 or work 0755921588 please note date on photes not correct all taken on 08 02 2009 Starting Bid $10,000 http://cgi.ebay.com.au/1970-datson-240z-unfinised-project_W0QQitemZ290294908414QQihZ019QQcategoryZ6763QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Tripple Dellorto Carburettors / Carby / Complete Setup. Ready for action. Came off working Datsun 260z L26 Motor. -Redline Manifold -K&N Filters -Last used 6 months ago - Plug n' Play performance for your Datsun 260z!! Would be suitable for any L24,L26,L28 motor!!! Skyline, 260z,240z or 280zx or Patrol could run this setup. Very capable performance setup.Great for that restoration. Other 260z parts coming soon- 5 Speed Manual setup available. http://cgi.ebay.com.au/260z-Tripple-Dellorto-Carburettor-Redline-Manifold_W0QQitemZ260359095780QQihZ016QQcategoryZ33549QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Bidding starting at $1,000 Buy It Now at $1,200

There's one on Ebay .99c at the moment, It's in Brisbane being sold by a bloke called joey670 1 http://cgi.ebay.com.au/Datsun-260z-starter-motor_W0QQitemZ190285199693QQihZ009QQcategoryZ6763QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

240z $1,999.oo Buy It Now http://cgi.ebay.com.au/1973-Datsun-240Z-2-Seater-Coupe_W0QQitemZ270341627430QQihZ017QQcategoryZ2030QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Are you talking to me................ Are you talking to me............................... Taxi driver Fight............ Fight...... Fight...........(forming a circle by myself) Fight....Fight.....Fight Just like the good old school days...........Lets get it on.....

I brought one off Ebay aus and its the made in USA . Paid about $35.00 for it, 100% better than the oringal one in it. The Ebay seller is.. zshop_au Melbourne Vic Aus

You should slow down there, Your getting overly excited. Buy a Zed first then start planing what on your shopping list. There's most likely a hundred and one things to do first.

re-rusting.................Please explain "Pauline Hanson"