Scoota G

Yes i do have one but now i have a set of two. Not fitted to to the car but Maybe we should look at reproducing these?

Hell yea i was ready to fly up and help him myself, would've got really sore arms but. Any more description on the lash pads? They sooooo look just like a set i sold on ebay a few months ago.

Hey guy i have some mandrel bent genuine Lukey 2 1/4 inch bends two at 90 Degrees and one at 45 Degrees Free. Got them off dimitri but i'm going 2.5. So willing to post at cost and maybe a token donation to the club to keep us running if you like. Scoota

Just wondering why you're going to Toyota for parts and which ones. I didn't.

We should be right for Friday Evening, do we have a time in mind as we're Daylight Savings now. I'll get the Ballarat Boys informed

Try this. http://www.viczcar.com/forum/index.php/topic,3155.0.html

He might be easier to contact Via PM he's just a real busy man at the moment. There's not much left of the shell but those wiring parts he would have.

Try hitting it with a Big Rubber Mallet, the metal wil flex and most should break off, heat can also be used but i always advise caution applying heat to metal and flammable material.

Hey wally, I suppose on what your using the car for and the finish you are after. Is it mainly just a street cruiser, a daily driver will you take it to shows or will it become like of of those nut jobs car's that is so clean underneath and spend it's life on the trailer. Myself i just clean off all the loose stuff and then apply just a thin coat. On the inside some people take all the deadener off and leave it off. Other's use Dynamat Insulation or similar which converts noise into heat. If you use it on the highway a lot you may want more so you can hear the AM Radio. What i'm saying is it depends on what you'll use the car for. Myself i'd like to do the clean look underneath and use the Dynamat (which costs about $250 to do a whole car) even inside the door skins.

Is that cam ground with thicker Lash Pads?

Would these ones suit? http://cgi.ebay.com/ebaymotors/Datsun-L-Series-510-620-240Z-280Z-New-NOS-Rocker-Arms-_W0QQcmdZViewItemQQhashZitem255fea4f03QQitemZ160522981123QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Other than that there's a house up the road that has 2 180B's in the driveway in poor condition

Yes excellent composure under such difficult circumstances Lurch, to all that were there in person and in heart i'm sure Kyle would be Happy. We'll miss you.

Photo good, he's right. No lash pad rotation is possible.

Hey Guys and Gals attending with Zeds, just for those who are bringing Zeds along if you have UHF, Channel 16 so we can be in tune like Kyle would expect us to be. See you all in the Morning.

Hey simon i'm with you but that's a reasonable price. Despite that we are more than just a Forum, we are a family of Zed owners. Join us if you have the Metal or the Desire to obtain. Nuf Said

I tell ya it hurts just to read that but it's great that no one was hurt, i'm sure with the guys on here there be a suitable replacment but all the same i'm so sorry to hear that. Try to keep your chin up and keep us informed

Just spoke to Dale and he will be there with co-pilot Rob (Fuzzy) in one of Dale's Zeds.

I think this is all gone but try asking Lurch, i helped him pull apart a 2+2 recently. I have a DS one here, not sure about the PS. I'll look further tomorrow. Scoota

I was running one i got off of evilbay and already had the mount modified to suit, an equivalent Nissan one was more expensive and the one in there now can have Bosch internals fitted to it.

All good. Sorry can't help you with the Alternator as i run a 120amp Holden Item and the wiring is modified, but, it should be one plug a white wire the same thickness of the one that went to the starter and a Black one. The back one goes to the body ot the alternator The white one bolts onto the only stud sticking out of the alternator. The plug is pretty simple. See how you go, maybe someone else has a photo.

I'll be there with My Zed and co-pilot simon.

Ok, big cup of STFU for me Seriously mine do self cancel with the mod but my steering wheel aligns in the wrong place.

Yep that's right, as you see it in the pics. The other two wires should be bound together and one comes from the relay (big one near the Master Cylinder) and the small yellow and black one is for the ignition switch.

Ok so Christmas Day i got the spanners out with some help from my amber friend / fiend and changed over the wiper arm mechanisim, which was really worn on one side, with the one's i got with a bunch of other parts i got from scoot3r42 (ben). How did you spend your Christmas?