RB30X Posted November 18, 2010 Posted November 18, 2010 Now my Zed is on the road I have to go through and clear out everything I don't need anymore. If items don't have prices make an offer. I am in Townsville QLD so keep that in mind for postage. I can take photos of anything and send em to you if you want clarification or condition. The rest will go on ebay. 240Z choke cables with lever SOLD 240Z choke lever 240Z gearbox to speedo cable sender thingy SOLD 260Z 2+2 rear hatch with good glass SOLD 260Z 2+2 door cards in resonable condition 260Z 2+2 long interior tail light cover thing Miscellaneous Zed arm rests Rear sway bar from either a 260 2+2 or a 280zx 280zx RH headlight cone 280zx 27 spline stub axles with six bolt companion flanges SOLD 280zx 25 spline CV shafts SOLD 280zx front and rear strut assemblies L28 starter motors x 2 L28 balancers x 3 L28 alternators x 2 (1 SOLD) L28 flywheels and clutch x 2 L series thermostat housings x 2 240z 260z Rear windscreen rubber (brand new) from Black dragon never opened $120 ($150 plus wait at rare spares) SOLD 240 260Z LH and RH door rubbers (brand new) from black dragon, (I wasn't happy with the fitting so I bought others) SOLD 240Z quarter glass rubbers (brand new) black dragon (the bit that holds the glass not the bit that seals against the body) SOLD Brand new rear hatch dove tails from black dragon still in packet SOLD Brand new front indicator lenses yellow/orange from black dragon L24 points dizzy, works well 260Z 2+2 LH and RH quarter glass and door glass SOLD 280zx wiper motors x 2 280zx electric window motor L28 cylinder heads x 2 L28 efi intakes x 2 1 is a W24 and the other is a P72 L series rocker covers x 3 L28 cranks x 2 (pistons and valves and other parts as well) RB30 block RB30 head VN V6 cylinder heads LS1 cylinder heads 241 casting LS1 injectors LS1 intake manifold LS1 aftermarket dual valve springs cheers Quote
lightmaster240z Posted November 18, 2010 Posted November 18, 2010 Tim I take the choke lever and cable regrads Bruce ;D Quote
Brabham Posted November 18, 2010 Posted November 18, 2010 What color are the 2+2 door cards? Cheers. Quote
RB30X Posted November 18, 2010 Author Posted November 18, 2010 Black door cards. You and everyone else Bruce Quote
zaxzeds Posted November 29, 2010 Posted November 29, 2010 Hello there, can i get a phone number or call/sms me on 0416 025214, I am interested in a few of your items, cheers Quote
RB30X Posted November 30, 2010 Author Posted November 30, 2010 List updated. My number is, oh four oh oh, five oh oh, two seven four. cheers Quote
RB30X Posted July 16, 2011 Author Posted July 16, 2011 Just re-hashing an old thread. It looks like I am potentially moving to another town so I dont want to take all this stuff with me. Make me an offer. Quote
juz0 Posted July 16, 2011 Posted July 16, 2011 is postage to brisbane available on the heads? which heads are they by the way? cheers Justin Quote
RB30X Posted July 17, 2011 Author Posted July 17, 2011 Postage is available to India if you pay for it. I assume you're referring to the L series heads. They are N42 or N47 or something like that. Not turbo ones or anything. A complete head with valves and doings and cam etc weighs just over 20kgs. Quote
RB30X Posted July 17, 2011 Author Posted July 17, 2011 Just make me an offer Tony. At least you won't have to pay for freight I know lynsay stone (local rx7 racer) was chasing one with an inlet manifold for a 260 he's doing up. What did you need one for. Yours would have a turbo head wouldn't it. Quote
haul Posted July 17, 2011 Posted July 17, 2011 No its a N42, just looking for a spare, the cam carriers on mine are looking a bit poor, also can get it done up and do a swap without having the Z down for to long, I will give you a call during the week to arrange a visit to do some Z shopping. Cheers Tony Quote
zeds4ever Posted July 18, 2011 Posted July 18, 2011 Hey Tim ,how much for a 280Z wiper motor & do you have the support brkt for it as well. Regards: Alan. Quote
Cozza Posted July 18, 2011 Posted July 18, 2011 Hi Tim Just PM'd you regarding Black Dragon rubbers Cheers Mick Quote
RB30X Posted July 18, 2011 Author Posted July 18, 2011 Hey Tim ,how much for a 280Z wiper motor & do you have the support brkt for it as well. Regards: Alan. Just make an offer Allan. Just checked mate and there is no bracket. Just the three dowel holes, and three threaded holes on the drive gearbox for mounting. Just to clarify too, this is a 280zx wiper motor. Quote
zeds4ever Posted July 19, 2011 Posted July 19, 2011 Thanks Tim for info, I'm going to use the internals in a 260 housing & hopefully this will increase the wiper speed that is missing in my present set up. Regards: Alan. Quote
RB30X Posted July 19, 2011 Author Posted July 19, 2011 Hey Tim ,how much for a 280Z wiper motor & do you have the support brkt for it as well. Regards: Alan. Hey Alan, do you have a picture of a 280zx wiper motor? I just realised I might be looking at an electric window motor?? Quote
FLEXZED Posted July 19, 2011 Posted July 19, 2011 hey tim Are the Ls1 dual valve springs and injectors NEW and what do you want for them thanks in advance Loui Quote
RB30X Posted July 19, 2011 Author Posted July 19, 2011 The injectors aren't new. They are in working condition though as experienced by several white faced passengers of the 570Z. I upgraded to LS6 injectors, the details are in my build up thread in my signature. The dual valve springs are from VCM, possibly Lunati springs. They were on the heads I bought off a bloke who had all his work done at VCM before moving to Townsville. They are also not new but in fine working condition as they bloke removed them to fit bigger ones with a massive cam/head package. I'm thinking $200 for both including post? cheers EDIT: sorry I just remembered I still haven't installed the LS6 injectors. So I'm still actually running the LS1 ones. I guess I can't really sell them until I swap them which might not be for a while. So I guess it's $100 for the springs only then. Cheers Quote
RB30X Posted July 19, 2011 Author Posted July 19, 2011 Come on guys, if there is something there you need, or might need, or think you might need one day, make an offer. No resonable offers have been refused so far. cheers Quote
RB30X Posted August 1, 2011 Author Posted August 1, 2011 I'm definitely out of here so it all needs to go or it's at the tip. 260z stuff. Seat beats, indicators, vent panel, side vets, an original 240z fuel rail etc Bonnet torsion bars and hinges, 260 2 x 2 door window rails, 260z steering coluum. Quote
RB30X Posted August 1, 2011 Author Posted August 1, 2011 Also found a pedal box as well. Not sure if its an auto or manual, it appears to have a brake booster and clutch master cut outs. Quote
OZ001 Posted August 2, 2011 Posted August 2, 2011 How much for 1 l28 rocker cover and postage Sydney 2137? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.