acf321 Posted July 4, 2009 Posted July 4, 2009 As the ad says, I'm looking to swap a complete set of 40mm's for a set of 45mm webers. My carbs are 100% complete, and in running order. Cheers Quote
C.A.R. Posted July 4, 2009 Posted July 4, 2009 Generally speaking Adam, a complete set of 40mm Webers aren't worth as much as a complete set of 45's. 'If' you can find a set of 45's, I reckon you'll have to add some cash to the deal if you swap the 40's... My 2c of course Quote
luvemfast Posted July 4, 2009 Posted July 4, 2009 I misread that and was about to jump on board, thought you wanted to go from 45's to 40's. While we're at it, I'll swap my 40mm Mikuni's for 45, 48 or50mm's too Quote
chris240 Posted July 4, 2009 Posted July 4, 2009 oh well while were at it does anyone have a single 40mm weber they want to sell.. Quote
luvemfast Posted July 4, 2009 Posted July 4, 2009 oh well while were at it does anyone have a single 40mm weber they want to sell.. I have a single 45 Quote
Administrators gav240z Posted July 4, 2009 Administrators Posted July 4, 2009 Well while everyone else is at it, does anyone want to swap 44 PHH Mikuni's for a set of 50 PHH? Quote
Moderators Zedman240® Posted July 4, 2009 Moderators Posted July 4, 2009 While were all at it, convert to EFI!!! with throttle bodies! Never worry about jets again! Quote
chris240 Posted July 5, 2009 Posted July 5, 2009 Hey Dimitri, is that your old efi setup on evilbay? Quote
Zeddophile Posted July 5, 2009 Posted July 5, 2009 While were all at it, convert to EFI!!! with throttle bodies! Never worry about jets again! Is this acceptable? Quote
Moderators Zedman240® Posted July 5, 2009 Moderators Posted July 5, 2009 Yes, that is acceptable...all throttle bodies are nice! Hey Dimitri, is that your old efi setup on evilbay? Some of it is...just the manifold, motor and gearbox. EFI stuff is going back on the L24. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.