Cory Posted February 27, 2018 Posted February 27, 2018 After getting a quote for 5 of the cowl panel plastic plugs shipped from the US (~$80AU) I'm onto looking at alternatives. I run a small 3D printing and design service, the parts would be able to be printed no problem I just don't have anything to reference for the design. This is where I ask a huge favor from a lucky member with a vernier caliper and a good eye. If anyone is able to take out the plastic plug and sketch up a rough isometric drawing with all relevant dimensions I'd be happy to pay you a little for your time or even send you a couple sets if they work. Quote
Enzo Posted February 28, 2018 Posted February 28, 2018 I just looked on ebay. $21.99 for 5x plugs and $14.00 USPS postage. Total of $35.99 USD. So less than $50 AUD. A lot less time and effort expended to just buy online. That's my 2 cents worth. David. Quote
260DET Posted February 28, 2018 Posted February 28, 2018 Just an observation, we have someone here interested in reproducing small S30 parts, wouldn't it be an idea to help and encourage him? Quote
Cory Posted March 1, 2018 Author Posted March 1, 2018 (edited) You're right David. Luckily I've found someone in Aus who's happy to part with a set. To anyone ending up here in the future plug-less, contact me and I'll make you up a set. Need to pay forward the hospitality of the forum. Edited March 1, 2018 by Cory gav240z 1 Quote
Administrators gav240z Posted March 1, 2018 Administrators Posted March 1, 2018 I was gonna say if you need me to measure them I have some to check. Got vernier calipers also! Cory 1 Quote
Andrew_L26 Posted March 1, 2018 Posted March 1, 2018 I can sketch up a design on solidworks if that would help you? I've got a few spares somewhere! Cory 1 Quote
Cory Posted March 1, 2018 Author Posted March 1, 2018 You guys are too kind. We'll revisit this project when someone else comes along who's as unorganized with their parts as I am Quote
aircobra Posted March 1, 2018 Posted March 1, 2018 take them to officeworks? the do the scan and the print might work Quote
Cory Posted March 1, 2018 Author Posted March 1, 2018 Scanning parametric parts is very tricky and has been something I've been keeping my eye on for a long time. I had access to a $100k hand held optical 3d scanner at a previous workplace and even that would barely be up to the job! Quote
road rider Posted March 2, 2018 Posted March 2, 2018 (edited) Can you please 3D print my 240Z And while you're at it , do one for yourself! Edited March 2, 2018 by road rider Quote
Six_Shooter Posted March 3, 2018 Posted March 3, 2018 What parts are being discussed here? A picture of said plugs? Quote
Linton Posted March 4, 2018 Posted March 4, 2018 (edited) I am assuming he means these these are holden but may be the same https://www.ebay.com.au/i/192291854694?chn=ps&dispItem=1 Edited March 4, 2018 by Linton Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.