mossy Posted August 8, 2017 Posted August 8, 2017 EOI for N47 efi head off a r30 skyline (closed chamber head) road rider 1 Quote
theremm Posted August 8, 2017 Posted August 8, 2017 Are these as/equally as desirable as the E88 efi heads? road rider 1 Quote
C.A.R. Posted August 8, 2017 Posted August 8, 2017 Are these as/equally as desirable as the E88 efi heads? Not sure, but I think Mossy is about to find out! PB260Z and gav240z 2 Quote
road rider Posted August 9, 2017 Posted August 9, 2017 Are these as/equally as desirable as the E88 efi heads? Not sure, but I think Mossy is about to find out! Closed chamber is the key word here E88 or N47........I wouldn't say no to either of them for a naturally aspirated engine P90 for a turbo set up Quote
road rider Posted August 9, 2017 Posted August 9, 2017 (edited) And the N47 is a EFI head. I think that some N47's also had steel liners on the exhaust ports. Maybe Mossy can confirm if this has them or not. Edited August 9, 2017 by road rider Quote
dat2kman Posted August 9, 2017 Posted August 9, 2017 Chamber volume is same as n42 heads, and those steel inserts restrict flow. Not sure if they can be machined out, or how they are set in? Maybe as part of original casting process. Quote
mossy Posted August 12, 2017 Author Posted August 12, 2017 Got a bare N42 head also that can go with this Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.