dat2kman Posted October 2, 2015 Posted October 2, 2015 Hmmm, not supposed to add metal to the head,,,, Quote
260DET Posted October 2, 2015 Posted October 2, 2015 Coming along nicely, classic paint scheme looks good. Quote
Riceburner Posted October 13, 2015 Posted October 13, 2015 Looking good! I'll be running the Kameari bits too, did you use the standard crank bolt/washer on this? Quote
hmd Posted October 13, 2015 Author Posted October 13, 2015 Looking good! I'll be running the Kameari bits too, did you use the standard crank bolt/washer on this? I have no idea, James Flett is building the engine. Quote
hmd Posted November 9, 2015 Author Posted November 9, 2015 Sweet little engine is in At Historic Sandown 2015 dummy grid Quote
Administrators gav240z Posted November 9, 2015 Administrators Posted November 9, 2015 Interesting, not using the standard inlet manifold? What is the reason for using this fabricated version? Quote
hmd Posted November 9, 2015 Author Posted November 9, 2015 Gav, just to look different that's what Jimmy told me. gav240z 1 Quote
dat2kman Posted November 9, 2015 Posted November 9, 2015 For carburreted cars, intake manifold s free. For injection cars, intake manifold mst be as fitted, save internals f manifold s free. ( slice and gouge, baby, slice and gouge,,,, then weld-er-up!) Quote
Administrators gav240z Posted November 9, 2015 Administrators Posted November 9, 2015 Thanks, I read between the lines so to speak. Quote
hmd Posted February 7, 2016 Author Posted February 7, 2016 More r&d over the Xmas break Big thanks to Sinisha for direction on servo replacement. Quote
hmd Posted February 8, 2016 Author Posted February 8, 2016 Gordon, I just need to find 10 seconds and some just to be close to your car Gordo 1 Quote
hmd Posted February 8, 2016 Author Posted February 8, 2016 Shouldaboughtmine,,,,,,! So I can be 9 seconds slower ? Quote
dat2kman Posted February 9, 2016 Posted February 9, 2016 So I can be 9 seconds slower ? You're down in the 1.46's around Phillip Islamd now ? Faster than all the Porkpies and the PantyTearers! Bloody brilliant! Will follw rgress on Natsoft for the Hstrics! Quote
TomC18 Posted February 9, 2016 Posted February 9, 2016 Good to see Gordo got down to 1.46.5 vs 1.57.5 for Hung, what did the Group Sc car do there? Quote
hmd Posted February 9, 2016 Author Posted February 9, 2016 (edited) Good to see Gordo got down to 1.46.5 vs 1.57.5 for Hung, what did the Group Sc car do there? Lap record for 2001-2600 cc car in Sc The late Peter Hall. Peter Hall Datsun 260Z 01:54.1 http://www.groupsracing.org.au/laprecords.html Tom, you need to pull your fingers out and get the Roadster into Group S. Edited February 9, 2016 by hmd Quote
TomC18 Posted February 9, 2016 Posted February 9, 2016 that's pretty quick, What about the 280Z? my car's at the mercy of go-slow motors... have 2 engines coming along, a high revving 2litre for Sb and a monster for the Group T car, it's really sh##ting me.... I was trying to find a spare engine for a shake down run while i wait, but not too many keen donors Quote
hmd Posted February 9, 2016 Author Posted February 9, 2016 that's pretty quick, What about the 280Z? Unfortunately the 280Z is in the 2601-3500cc and the lap record for that sub-category is Geoff Morgan Porsche 911 01:47.8 Quote
hmd Posted February 9, 2016 Author Posted February 9, 2016 (edited) You're down in the 1.46's around Phillip Islamd now ? No, Gordo time is 1:46. I meant my car is 10+a bit slower than Gordo. Buying your car would just make that 9 sec slower than Gordo. Edited February 9, 2016 by hmd 260DET 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.