Shaun05

Damn right! If the photos and description are even close to being an accurate representation of the cars condition, this would be a fantastic buy.

All of the complete engines are now SOLD. Still have the Block and have found the Crank, rods, pistons, head etc. that go with it. Can separate.

Two of the four have been sold. Will do a deal for anyone here that wants to take both remaining engines.

I second that. Quite interesting.

No problem, David. L28 666036 is yours if you want it. I will send you a text shortly.

Unfortunately no, I don't. I'm happy for you to organize for someone else who might be doing one to pick one up if that suits.

Hi all, All four engines are now sold. I still have the block available and have now found the crank, rods, pistons, sump and head to go with. Can separate. I have quite a few L28 engines, whole, partial and parts from my time trying to find a suitable block for my engine build. I initially had two blocks that I bought that were entirely unsuitable for oversized bores, so I went on the hunt for every L28 I could find. All up, I found about ten. Fortunately, the first one of that batch that I pulled apart and had sonic tested was suitable for an 89mm bore, so I now have surplus engines. I was holding onto these but as I will be moving house and will probably have significantly less room for storage, I'll start moving them on. The engines come from various vehicles. All engines were bought as "running when removed" but I cannot guarantee condition. I bought them for the block only. Items are all pick up from Cranebrook (near Penrith) 2749. 1. SOLD L28 666036 (pictures 1 & 2) F54 Block/N42 Head This engine was supposedly rebuilt for a 280ZX project that was never really completed. Judging by it's exterior appearance, this looks to be true. It's very clean. $500 2. SOLD L28 747666 (pictures 3 & 4) F54 Block/N42 Head This one was bought from a bloke who was also trying to do a restoration on a 280ZX. He ran out of money, space and motivation. $400 3. SOLD L28 591511 (pictures 5 & 6) F54 Block/N42 Head This one was bought from a bloke who had a thing for Patrols and wanted the body but not the running gear. $400 4. SOLD L28 581486 (pictures 7 & 8 ) F54 Block/N42 Head This was bought from someone who had a shed full of Nissan spares and had to cut down, much like myself. $400 5. L28 064486 (Picture 9) N42 Block This was bought from the same guy with the shed full of spares. Block has surface rust inside and bores are at 87mm. $100

Good afternoon all, I am after a set of seat rails/brackets for a 260Z. Both driver and passenger sides. I'm not exactly sure if they are all the same but mine have the front and rear mounting tabs sloped downward. I'll even take whole seats if it gets me the rails. Cheers, Shaun

SOLD.

SOLD.

SOLD

SOLD

SOLD! I have a set of standard 260Z wheels for sale. They are in good condition with no gutter rash or damage that I can see at the moment. They are dirty but would scrub up well and probably polish up quite nicely. The tyres are pretty old but seem to hold air. I haven't done a proper test on them though. Located in Cranebrook, near Penrith, NSW. Prive: $300 SOLD!

Morning all, I have a new, still in the box, Z power steering setup for a 260Z that I'm looking to sell. I've had this for some years now and was originally going to install it when the car was more of a road going affair. Now that it's turned into more of a track car, I don't require the power steering. I can take some photos a little later if anyone would like them but you can see the setup here https://zpowersteering.com/?gclid=EAIaIQobChMI__CzyY2P6gIVwg0rCh3TOA25EAAYASAAEgLo5PD_BwE The kit is located in Cranebrook, near Penrith NSW. Price: $1600 SOLD

Morning all, I have an extremely hard to find 3.9 ratio R200 longnose LSD for sale. This unit was built by Stewart Wilkins for my 260Z. The LSD has been modified by Stewart for far better performance, with additional clutch plates used. This only spent ~150km in my car, before being removed in favour of a 4.11 ratio unit, so it's in basically as new/rebuilt condition, as Stewart will be able to tell you himself. The diff is currently located at SWM in Mulgrave, NSW. Price: $3000. SOLD.

Morning all, I have a 71b close ratio box for sale. This came out of my 260Z, which now has an R32 box in it, so this is no longer needed. Was working fine when removed. As stated this is the desirable close ratio box, with the ratios being (if memory serves) 1st: 2.906 2nd: 1.902 3rd: 1.311 4th: 1:1 5th: 0.864 The box is currently located at SWM in Mulgrave, NSW. Stewart will be caring for it until sale. Price: $1000 SOLD

Hi member, I'm looking for a straight, reasonably un-dented front bumper for a 260Z. If anyone has one they're willing to sell, or knows where I could get one, please let me know. Cheers, Shaun

There's one on Gumtree. https://www.gumtree.com.au/s-ad/campbelltown/auto-body-parts/datsun-260z-cigarette-lighter-and-holder/1236214708

Is the rear bumper still straight and undamaged? If so, are you willing to sell it?

You may want to consider a whole diff. There was an R200 longnose 3.9 LSD for sale on FB in recent days and it was located in Brisbane. I can't seem to find it now though. The 3.9 and 4.1 ratios are quite hard to come by and very expensive when you do manage to find them. Maybe just post a wanted ad on some of the FB Datsun pages.

Can this be moved to the "wanted" section please? My screw up, sorry.

Hi all, I'm looking for a front and rear bar for my 1975 260Z 2 seater. The font one I have is bent quite significantly and the rear was colour matched to the body by the P.O. I'f I can get a straight front one one, I may be able to forego the rear one and get them re-chromed. Alternatively, if anyone knows where I can get a decent aftermarket reproduction, I'd be ok with that too. Cheers, Shaun

Ill take them. PM'd you.

Where exactly is the engine located?

I've been for a ride in that car and can confirm for anyone interested that the engine in it is an absolute weapon!