ilbert

Thanks agno. I reckon I'll get one. Cheers

Hi there, I see you used a pierburg pump on a customer's car. Have you run it yet, any comments re noise? I'll end up using the new pierburg as a lift pump in fuel injection set-up. So a quiet pump would be ideal. The current carter is pretty loud.

I'll check for pre filter, there's one there pretty sure it's down stream though. It's an older one I reckon 10 + years old. Ran it for an hour this arvo no problem. Reckon I'll flush it out and see if any crap comes out. I'll check that pump , thanks for the recommendation.

Hi Guys, Car ceased to proceed this morning (datsuns don't break down) the carter electric fuel pump had stopped working and was extremely hot. About 3/4 later had cooled and worked again. Drove home. Any ideas what would cause this? Is just a sign the pump needs to be replaced? Thanks in advance. (L28, triple webers, carter pump with fuel return) Cheers

Saw this, nicely restored, in far north Queensland. Chatted to owner - its number 233.

Great tip. Thanks for the assistance!

Hi guys, I have noticed a crack in the paint at the base of the windscreen pillar. Is this a typical thing? I'd guess there'd be a weld under this point. Should I jump on it and have it fixed or just put up with it? The car was resprayed about 4 years ago, but not to bare metal on this part. Thanks in advance.

Anyone interested in webers, this is great explanation series on how they work and how to rebuild them.

looks great. im thinking of removing the air dam on mine. By the way what wheel tire combo do you have?

Cant make it, away this weekend. Would have loved to.

I've used Randy and Andy on my zed, they know Datsuns propper good, and are nice guys in the mix too.

Far from cool, but interesting choice of car for the add, probably the colour....

Yes, I noticed you have additional earth's coming off the switch. Maybe a trip to the auto electrician.

Refer photos: Solid black wire headlight dipper (earth common) Red wire yellow stripe head light Red wire white stripe head light Solid green indicator common earth White wire red stripe indicator active White wire black stripe indicator active

I just pulled my indicator switch to bits to fix it. So keep hold of your old one, it might be salvageable. My car's a 73, I'll have a look tmo. My high beam operates from the indicator stalk, where did yours used to?

Pm sent re scuff plates.

Good work Bruce, long drive for you. Gordo put this Cafe down for a drive "week". Port Douglas FNQ. I reckon the zeds would need a service.

I'd love to, but going to qld on Sunday. (Unless Saturday works for others)

Hell yes mate, name a time!

They're coffee cup holders aren't they?!

Overiders pictures id - say good but not perfect condition.

Hi Guys, To help fund my daughter's trip to the Scout jamboree we had the bright idea of selling some of the old parts i've got kicking around in the garage as follows: ZED stuff: Rocker cover (with elephant cap) $100 E88 head with cam but no rockers $150 bumper overiders $40? hotwire mags $75 (painted red) DASH from a 1200 coupe $ 150 - good condition L18 / L16 head gasket from L18 New/Genuine NISSAN in unopened package $25 Bottom radiator hose 720 ute New/Genuine NISSAN $15 random hoses (fuel or cooling 720 ute) New/Genuine NISSAN x 2 $15 for both sealed beam headlight x 1 720 ute New/Genuine NISSAN $50 gasket kit opened - think L16 or L18 - prob no difference Repco brand ( no sump gasket) $25 thermostat cover - brand new L18 3 bolt $30 Listed on Ebay too. Cheers

Yiikes that thing is fierce!!

Great roads especially kulth kiln bit! Thanks again to Gordo for his organisation and enthusiasm! Now into the shower to wash off the hydrocarbons.

Just a slim chance for me. Love to attend though. Same meet up place / time?