Gordo

+ 1 for Peter . He knows you can't fix that one over the phone. Well done Peter . Gareth, you are one lucky man.

Simon, this may be true, but like me and the other guys its nice to keep an assortment of spares in the shed. You never know when you might need them. So some advice, if you have room try and buy a cheep 2+2 and keep,it for spares.

Hey Pete, would my old headers work on the bigger motors?

Yea. My hubs have arrived from Brisvagas. Thanks to gillteck, Back to the shed this weekend! Cheers.

This is looking great. Love the hole setup. Can't wait to see the Dyno results. And Peter did less make those headers or are they SWM headers.

Hi Jason, and welcome . So this is the beginning of your journey into zed land, there is much to learn about the mighty Zed. And the good thing about it is that its all here on this sight. Always someone to help. Enjoy.

Owen , you are going to love this Engine, when you get it up and running it will be time to do a drive day, or at least meet up some where! Melbourne boys and Ballarat boys and Warrigal boys and the other Boys.

Yes the 240z and 260z hubs are a different off set. The wheel offset is the same but the disc offset is 10mm bigger on the 260 hub. So the the 240 hub is 15mm thick from the disc to wheel bolt surfaces, and the 260z hub is 25mm thick, there for making the 260z disc sit 10mm closer to the strut. The hubs that Simon had where 22.5mm but the inner and outer bearings were 20mm closer together . Maybe off a smaller datto, like 120y or similar .

Thanks for your replies, Fuzzydropbear got back to me and has a set of hubs, but was already doing a deal with gillteck. (John). So John is posting some hubs down. Thanks again John.

PM sent.

Owen, saw your engine yesterday , Peter tells me your block has a special quality for a big bore. Well done with that one. Also saw the 3.5lt block and crank. The work that these guys do is amazing. To get that crank to fit inside with the clearances . They have to grind out the oil line in the block and rebore another one! Cutting edge stuff. Way ahead of other engine builders, they wouldn't touch that stuff. If you want the Best Engine. Take it to Peter and Les. They relly know the craft. I just want one.( but you already have one) yer another one! Bigger and better. Cheers guys ,great work.

Best we start over, yer I heard that one before Pete. Owen you know it's gonna be a ball tairrer. In all the time I've had my PMC haven't had one oil or gasket leak and its sounding sweeter and sweeter.

Garith, sounds like you have already done the coroners report on this one, good observations. It would make a good parts car.

Thanks gillteck, I will see how I go with the Melbourne guys, if not successful i will let you now. Cheers.

Hey Simon, if you can have a look for me that would be great. I agree with Luvemfast

Thanks Gareth .No luck with Lurch . Waiting to hear back from Ash.

Anyone got an old 260z2+2 parts car I can rat some front Hubs from ?

Hi guys , I'm after a set of 260z Hubs. Any one in Melbourne have a set they don't need. Cheers Gordon.

If we get enough, they might be able to put us all in the same group. That would make a great photo and video .

Hey Gareth , you putting the zed on the operating table already, surching for a bit more HP, hope the gearbox holds out. Cheers.

Yer good pick up Dave, I was reading the one below. V8 super cars. I have amended the above. Cheers.

Nice. To bad you couldn't do it in Feb 2014. Flog it for a week with the boys and then hand it over fully tested. lol.

What sort of car are you taking down Scoota?

Good stuff Richard, Peter Mac and I are going to enter the November sprint. Maybe we can get a few more and make a big weekend out of it. Heaps of time to get ready. Gareth and Simon ,Dimitri heaps of others get on board. Cheers.

Hi Richard, if you go to the PIARC home page, click on calendar and you will see. The weekends of. June 15/16, August 17/18, and Australian sprint champs November 9/10. Most of the PIARC sprints are 95db, and the Saturday is always the practic and some time passenger sessions. So Saturdays are not timed, but great for you to get your self sorted, and come out Sunday and kick some butt, November looks like it Could be a good one to get two days in!!! Cheers.