Jump to content

waxhead

Members
  • Posts

    533
  • Joined

  • Last visited

    Never

Everything posted by waxhead

  1. Im a fan of the red rocker cover I was thinking about doing it my self, except to many people have now so im going to go for a different colour
  2. waxhead

    cam for L28ET

    ok thanks And you found a decent power gain by changing the manifold Thats awesome I was debating what to do in regard to exhaust manifolds and you just answered my question Do you happen to have a pic of the one you ended up with
  3. waxhead

    cam for L28ET

    Can you post a pic of your intake / exhaust side of the engine please
  4. waxhead

    cam for L28ET

    Are you referring to the stock intake or exhaust manifold when your talking about the restriction
  5. Yeah it comes on boost at 68 rpm
  6. Ok how is this Its a bit darker but you get the idea more
  7. I would waste mine on hookers and beer
  8. Ok well got in there with the porting tools when i started i couldnt fit a 32mm ball bearing down there now i can roll a 35mm one straight down there I also cleaned out the short turn alot so that its a more direct flow Im very happy with the result the pictures dont show it as well as it should, but you get the idea I have started to clean up around the outside of the manifold , the casting marks will all come off then i will take it down and get it sandblasted to give it that sand cast look again. My goal is to make it look like an aftermarket manifold and not a hand fab job The flash off the camera takes awy from my porting work, i will try and get some better ones tomorrow
  9. Some of these big engines dont even run a lower big end cap No need as they dont rev hard enough
  10. I will be interested to follow this build thread What engine are you going to go with
  11. When they say its mechanically a1 its like going on a bline date with some friend that has a great personality
  12. Where did you get your carbon bumbers from
  13. oh yes the throttle body how does something like this look http://cgi.ebay.com/ebaymotors/TPI-Intake-Throttle-Body-Corvette-Camaro_W0QQitemZ120422138850QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item1c09b803e2&_trksid=p4506.c0.m245&_trkparms=72%3A1171%7C65%3A12%7C39%3A1%7C240%3A1318
  14. The g nose Awesome i want one of those I will be calling him tomorrow to find out more Thanks for that
  15. My wife is japanese
  16. That picture doesnt make it that clear but i will have it welded up soon and it will make it clearer I have the exhaust flanges off being cut by the waterjet guys and i will start my exhaust manifold as soon as i have finished the intake
  17. This is what the manifold will look like when i weld it back together Of course it will have all the holes filled and the casting cleaned up When its all cleaned up and run over witht he cardtridge roll i will take it and get it sand blastered I want to have the sane cast look on the whole manifold so it looks like an aftermarket system
  18. OK well here is my thread of my 260 build up It was going to be an rb30det but looking around i see they are getting big power out of the l28 turbos so i have decided to stay period for the car I brought it off a fellow member here and it seems to be in reasonable condition. Got a few areas IE under the dash that i need to fix the rust in but nothing to major I am sure the owner before me didn't know about that so its all good Anyway I don't have much room in my garage at the moment on account of jetskis and other toys in the way so i decided i would start on the engine at work Mainly the manifolds Its common knowlodge that a plenum should be about 1.5x engine cc which means my one should be 4.2 litres Its not hard to look at the stock injection manifold and see that its no where near that. So out comes the alloy cut off saw and we have this.
  19. I would like the iges file of that as well if you can send it to me
  20. I saw those , was wondering if to bid on them or not Good buying its not like the price was alot
  21. Looks good Your workmanship is top knotch Im looking to make my own intake manifold as well , will be interested to see how it turns out
  22. ok I will keep you in mind yes it has a p90 head
  23. Why dont they get artists and slowly squash them together until there heads pop What a waste of good metal i thought most artist were hairy kombi driving , grass smoking greenies I dont think they would like such a waste of valuable minerals
  24. I'm looking at an rb30det which i have the parts for Or I'm looking to stay period and turbo the l28 Doing the fabrication is no issue for me as i am retrained car mechanic that now teaches at a high school I'm the main metal work guy so i have all the tools available to me
  25. Yeah thanks Got lots of work to do at the moment I have the dash out and cleaning up some rust behind it at the moment Going to do the body and the interior before i get started on the engine
×
×
  • Create New...