Jump to content

peter t

Donating Members
 View Profile  See their activity

  • Posts

    2,239

  • Joined

  • Last visited

  • Days Won

    34

 Content Type 

Everything posted by peter t

  1. peter t
    Same here mate but this time I seem to getting the run around. I have to following up every e-mail after a few days. A friend has bought a set for his 2+2 with non of these problems. I will wait and see what numbers are on his struts and if they fit or not.
  2. peter t
    Well I tried to order a set of the new Koni yellows to fit my 1975 260z 2+2 from the Z store. After waiting for long periods of time for replies to e-mails they have advised me that these shocks won't fit Australian delivered cars based on the strut part numbers I supplied directly off my car. They must have different struts fitted to US cars but Z store wont tell me what the difference is. Bugga.
  3. peter t
    Not sure mate. I only had them on the L26 for a short while. Maybe some one else has some knowledge as to what performance can be achieved with these.
  4. peter t
    Hi I have a set of 2 inch JAG SU carbies equipped with K&N filters that are no longer required. They were done up just before I bought them and have had little use although have been sitting around quite some time. Looking for $500 plus frt or pick up Loganholme.
  5. peter t
    Thanks, I have located one thanks.
  6. peter t
    This may be better.
  7. peter t
    yep I used three modified brackets that are for Air pods bolted to heat shield and then bolted to manifold studs.
  8. peter t
    After a recent L28 rebuild I changed the throttle to cable which changed the characteristics of the engine completely. Much better than the old standard rods etc.
  9. peter t
    The cable bracket looks flimsy but is solid steel. Made from an old cargo barrier bracket and doesn't flex.
  10. peter t
    I sold a spare R31 box to Aubrey some time back. He may still have it. Aka Bonkers. Might want to shift this to the wanted section Cam.
  11. peter t
    I will make a decision when I get the four that in the car out to see their condition. The 2 spare need a refurb. Ball park figure about $250 the lot. Plus frt.
  12. peter t
    Well I had issues with the throttle linkages being sooooo old so I fitted up a new cable and what a difference. So responsive got rid of all the jerking etc.
  13. peter t
    Hi, I will have one and a half sets of knoi reds for sale in the near future if there is any interest please PM me. The half set are 86-2361 and will need new seals. Peter.
  14. peter t
    Does it matter if you use a LHD car wiper motor or do you need a RHD one.??
  15. peter t
    Go with Nustad no one will know.
  16. peter t
    Congrats to all. Must keep a eye on the for sale section now for the fire sale of all those Zeds. LOL.
  17. peter t
    I had mine done up by Col Robinson & Co at Kedron. 0733504000. Good service although he had to make new bushes for it as standard ones were sloppy. Had to take it back but he fixed it up no probs.
  18. peter t
    Mate they are all welded to stop them from coming undone. This is done in the factory. I have have seen four racks and they are all the same and also in the book. Take note of No 4.
  19. peter t
    I have located one thanks.
  20. peter t
    The rocker gaskets from SWM are the best.
  21. peter t
    Already seen one engine stuffed using "MODERN" sealants. Bits of silicon break off inside and block oil galleys. Have got a new cork gasket from SWM and install correctly should do the trick. Poor quality gaskets don't work really good in the long run. A dollar saved is ten lost in the long run. Should be able to make some when I can get out and get some steel.
  22. peter t
    I have one side Gav but lost the back and straight side bit. Have an annoying oil leak that wont go away. Put a pic up on the FB page.
  23. peter t
    Do you have the supports that bolt around the back and sides of the sump to enable the gasket to seal better???
  24. peter t
    Hi does anyone have a SET of the sump stiffing plates that screw up at the back and side of a L28 sump. Seem to have misplaced mine.
  25. peter t
    What is the brand of these???
×
×
  • Create New...