Scoota G

Oh crickey i am looking at a set now. I'll put up a picture in a few minutes. Both have all their pins and pretty good chrome.

I have had a request from a local guy who has bought a 260Z with front damage. He's chasing a front bumper and bonnet with vents. Condition must be very good on both. Cheers Mark K

Here's a link to a compressor similar to the one i have here. http://www.ebay.com.au/itm/Nissan-Air-conditioning-Compressor-Aircon-A-C-AC-Pump-Universal-NEW-/390667019181?pt=AU_Car_Parts_Accessories&hash=item5af591a3ad&_uhb=1 You can see that it fits quite a few models in the description.

I have a good compressor here.

Yep, it's all there. Just missing the compressor and passenger side lines which are easy to reproduce. I know this because i set up air con in my other Zed. I'll travel to gordo's and get all the stuff you need. I done seen it with my own eyes!!!

Ok what you have is a budget aftermarket setup. It's Still ok but (trails off into the distance.....) The bracket is homemade and has no tensioner pulley from what i can see. I like the genuine stuff but it's getting harder to find. The best part to get for these setups is the original heater box with evaporator, once you have that everything can be adapted like the lines, condenser and later model compressor. I would strongly recommend getting onto Gordon and asking if he can pull the bits out for you. There's jay in Ballarat who has the same gear but he's prices are full on retail. If you get stuck let me know and i'll go wave some cash in front of Jay's nose and get him to bite. Mark K

Make sure it spins freely by putting a spanner on the center bolt and giving it a twist. RB30 Compressors and similar later model Nissan compressors (CA20 and such) fit and may be more efficient too.

I actually wrote the tutorial and i have a spare set of brackets here. I have to modify a set for Tai soon so i could do two sets at the same time if that suits you.

I spied some bits on Gordo's parts car at the Christmas BBQ. Perhaps he may help you with the parts you need.

What a load of rubbish. I engineered my zed with a cleveland and the only thing they had to do was pass a brake fade test. Just goes to show how these "engineers" vary from state to state. They should all be working off the national code which can be downloaded. If i were you i would check out the arizona zed car gear as it may not be much more than building your own setup.

I have heaps of them.

I think there are two types, one with the black plastic and one chrome. Which one are you chasing?

That's the ticket Steve

http://www.ebay.com.au/itm/Datsun-260Z-Coupe-2-seater-Project-Car-/281223133104 Here's a find that could see your project step into a higher gear. Zeds for sale at the moment are like Autumn leaves at the moment.

I have to agree with young Steve. Just keep at them till you get the answer you want as their customer service is not the best!

I think between a local club member and myself we have 5 Sets of calipers (that's left and right) between us. PM me if you want another set.

I put the clip on all the way , belt it in with the palm of my hand and give it a little wiggle. Sounds like a girl i used to know.

How are you trying to fit it? Please describe the process el capitan.

No one wanted to hear the Cleveland for some reason :-\

Do you need the bottle or the pump as well? Does it need to be a Zed one because 200B ones fit

...and more...

...more...

...more....

...more...

Pics hey?