Dyno sheets, where?

[260DET]

Seeing that there are some hot Zeds around here it seems like it would be a good idea to have their dyno sheets al in one place. But where? I now have a reasonable one to put up

[C.A.R.]

I'm not a fan of this idea Richard - last time this happened on Ozdat a HUGE argument ensued over wanking rights...

[Zedman240®]

I think we have a thread with "Post best lap times / Kw's" or something along those lines?

[260DET]

By 'hot Zeds' I was thinking of race or fast street Zeds, not kiddy dyno queens or drag racers where maximum rules. So I was interested in comparing mine with say turbo L's, RB's etc, particularly in their top 3000rpm power spread which with mine is 4 to 7000rpm.  Which in my experience is what counts for a circuit engine.

 

So an intelligent discussion, I for one am well over thinking that the top line means much at all around a circuit. But if noone is interested or if it would cause angst then......................

[620Z]

In my experience all dyno's vary in their measurement of Klw's or Bhp. So comparing them for peak power can be misleading. But torque or power curve would obviously look ok.

Cheers

[peter mc]

i don't mind showing mine i did it a wile back and  there was no problem

[DTF260]

I have a sheet from when my stroker was built also

[roastbeef]

My dyno sheet isnt overly exciting,but the next time I am back in sydney I can upload the dynos from a couple of SWR engines.

* an east african safari Z L26 with billet crank.

* and an engine built for the immaculate (silver with orange stripes) 'WRC' plated Z

 

From memory there isnt too much excitement as far as peak power goes, but quite a difference in how they both achieve it.

 

[dat2kman]

Screen shot for the Fury FJ24 at 9000 rpm here,

And sheet for a 44 year old race car, that hoses Posches and DeTomaso's !

[260DET]

Looks like there are some interesting sheets around, hmmm.

[d3c0y]

Shortly I will be able to contribute a sheet for a PMC L34