scrumpy Posted November 19, 2008 Posted November 19, 2008 Can anyone out there tell me the difference between the front turn signal assemblies on 240Z and 260Z Will a 240Z turn assembly and amber lens fit into a 260Z Is the 240Z signal assembly smaller? Are the amber and clear lens intercahangeable I think the 240Z has 1 globe that is a turn signal only with amber lens. My 260Z has a 2 globe setup with a clear lens. One for a park lamp and the other a turn signal. I can get a new US sourced 240Z turn signal assembly. I then want to fit an Australian clear lens to it with an amber globe. Are the lenses interchangeable? Ar the dimensions the same? Quote
matt drago Posted November 19, 2008 Posted November 19, 2008 There is no difference between the bodies of the 240Z and 260Z front turn signal/park light assemblies. I got some 260Z assemblies, took off the orange lens, used 260Z fronts and used an orange globe for the indicator and a plain one for the park light. Ended up pretty neat. You can see a pic of it off the car at http://240z.drago.com.au/?p=117 Cheers, Matt Quote
scrumpy Posted November 19, 2008 Author Posted November 19, 2008 Do 240Z assemblies have a single globe or 2 globes. US cars have 1 globe. Quote
Moderators Zedman240® Posted November 19, 2008 Moderators Posted November 19, 2008 I'm pretty sure early 240Z front parker assemblies are different. 240 have just the clear lens and the one globe (21w indicator/5w parker) and the 260 have a split housing with the divider for each globe with the internal amber lens for the indicator. Whereas the 240 just had no amber lens because from memory alot of early cars in Australia had clear front indicators. In Japan and US they had the single globe version with an amber lens. I can take some pics to show the differences... Quote
scrumpy Posted November 19, 2008 Author Posted November 19, 2008 Thanks Zedman. Are the dimensions of either 240 or 260 lens and assembly the same and interchangeable? Quote
Moderators Zedman240® Posted November 19, 2008 Moderators Posted November 19, 2008 I'm sure they are the same. just have to be carefull when you are removing those small Philips screws not to round them...its easily done! Quote
matt drago Posted November 19, 2008 Posted November 19, 2008 Sorry, I thought that the question was about the fitment of the assembly rather than the contents of it. Yeah, the 240Z one has a single twin filament globe and the 260Z one has two single filament globes. Sorry about the confusion. Quote
KatoKid Posted August 10, 2014 Posted August 10, 2014 So, dredging this one up from the depths......my 71 240 has the single twin filament globe clear lens but it has an amber globe. Did they come with amber or clear globes and which is legal/requiered for rego? Thanks. David Quote
Agno Posted August 14, 2014 Posted August 14, 2014 Hi David, if you are getting the car registered for full reg (ie. not club plates) you will need to use amber globes. Quote
Administrators gav240z Posted August 14, 2014 Administrators Posted August 14, 2014 My 72 has clear lenses and I assume it came that way in 72. Quote
Lynton Perkins Posted February 1, 2018 Posted February 1, 2018 Sorry again for digging this subject up , but does any have or know where i can put my hands on either a pair of 260z front indicators or at least 1 LH complete light . I have RH i can rebuild but completely missing LH . Rgds Lynton Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.