Need Help Mounting Rear Bumper

[Jacksonp2483]

does anyone know how to secure the ends of the rear chrome bumper for 240z? Where I can buy what is needed and how to do so? I need hardware and rubber I assume. Any info appreciated. Cheers!

[Retro Z]

Its just a m10 bolt that goes through the small hole in the recessed area. Bolt goes under the sides of the beaver panel. Easiest way is to remove rear wheels to squeeze hand up between the fuel tank. No rubber is needed but can be found on ebay for about $30

[Jacksonp2483]

Thanks a lot for the info retro z!

Do you know what the rubber is called on eBay by chance?

It just seems like there should be something between the bumper and the panel. Cheers

[CBR Jeff]

This link might help you.

http://www.carpartsmanual.com/datsun/Z-1969-1978/body-240z/tail-gate-panel-trim-lock-rear-bumper

Don't discount trying your local Nissan dealer for parts like this.

Jeff

[gav240z]

http://www.thezstore.com/page/TZS/CTGY/classic02n04a01

http://www.thezstore.com/page/TZS/CTGY/classic02n04a01h

 

But a little expensive...

[gilltech]

There's a rubber sleeve which slips over the bracket to protect the paint, if yours is missing or perished you should be able to fabricate a replica without much difficulty.