Jump to content

Recommended Posts

Posted

3 Z in the Group S races on weekend just past.

 

Wayne Potts in the 280Z

 

wayenpotts

 
Jeff Thomas 260Z and my 240Z
 

yinyang

 

Posted

You and Jeff did well,

Nearly up to my times,,,wayne, naturally being a young daredevil, was right up there!

Well done, looked like a very good Historic meeting, good selection f cars!

Posted (edited)

I see Geoff Stone's name on that Eflin Vee, #13.

 

Here is a pic of Geoff's first Rennmax Vee (#6) at Warwick Farm, circa '71, when he owned Mona Vale Smash Repairs and I raced against him. Yikes... that's 44 years ago!

post-100401-0-62329600-1447051396_thumb.jpg

Edited by PeterAllen
Posted (edited)

Here's a brief race report from the Z perspective.

 

I went out in qualy and run out of fuel 3 laps from the end, rookie mistake.

 

Wayne qualified 10th, Jeff 13th and I got 17th out of a field of 39 cars.

 

Race 1: Jeff pulled into the pit after the formation lap of what suspected to be a head gasket. Wayne finished 7th and me 12th.

Race 2: Wayne finished 9th and I got 12th after nursing a brake issue after 3 laps, lack of pedal pressure

Race 3: Wayne finished 9th and I got 12th after nursing a brake issue after 3 laps, lack of pedal pressure

 

Wayne best time for the weekend was 1:25.39 in race 3, mine was a 1:28.96 in race 2.

 

It's really good to see Wayne's 280Z being constantly developed into a top 10 cars, he drove brilliantly too giving it up to the bigger boys on what is a horse power (and brake) track.

 

Here's a video highlights from my in-car camera

 

Edited by hmd
Posted

Some great racing there. You and the Healy raced very close. Must have some trust in each other. Well done on the weekend.

Posted

A bit grubby back there isn't it. I'd be doing something about the backing plates, either get rid of them or do some cutting and forming to make inlet/exit vents.

Posted

A bit grubby back there isn't it. I'd be doing something about the backing plates, either get rid of them or do some cutting and forming to make inlet/exit vents.

I am thinking the same line of thoughts

Posted

Here's a brief race report from the Z perspective.

 

I went out in qualy and run out of fuel 3 laps from the end, rookie mistake.

 

Wayne qualified 10th, Jeff 13th and I got 17th out of a field of 39 cars.

 

Race 1: Jeff pulled into the pit after the formation lap of what suspected to be a head gasket. Wayne finished 7th and me 12th.

Race 2: Wayne finished 9th and I got 12th after nursing a brake issue after 3 laps, lack of pedal pressure

Race 3: Wayne finished 9th and I got 12th after nursing a brake issue after 3 laps, lack of pedal pressure

 

Wayne best time for the weekend was 1:25.39 in race 3, mine was a 1:28.96 in race 2.

 

It's really good to see Wayne's 280Z being constantly developed into a top 10 cars, he drove brilliantly too giving it up to the bigger boys on what is a horse power (and brake) track.

 

Here's a video highlights from my in-car camera

 

That 911 in front, do you know whether this was a 3.2 or 3.0?. Great driving and love that screamer!

Posted

unfortunately John Ingham cncelled the logbook, so i have to get it re-logged, but the bigger problem is finding a legal size engine - Lou is doing a high revving 2l ie .3mm o/s, but that was started 15 years ago!!  the original has a hairline crack in the valve relief on the bore on No 1 cylinder. explains why it always pumped out water... found that this time last year  when i was hopinng to have it running by Xmas, so engine is the  big problem (Just excuses!)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...