Jump to content

Recommended Posts

Posted

I have KYB AGX 4 way adjustables on my car. They're a slightly shorter shock from a Z31 300zx, so great for lower springs. Not sure of the valving on them but they have been faultless on 340lb springs.

 

Got them from Baz at Datsport. They were cheaper than Koni yellows and he recommended them as being a good shock.

 

There's a detailed shock thread on HybridZ, there's a few racers going for Bilstiens from a VW. They're very well priced too.

Posted

You can get the BC coilover kit for close to that money, they even come with springs.

Posted

You can get the BC coilover kit for close to that money, they even come with springs.

 

I just looked them up. $1349 a set that might be the way I go

Are they any good?

Posted

Plus you will have to pay someone to cut and weld to your current struts... You are heading closer to $2000 already.

Posted

BC are crap - Valving in them is very poor as is the build quality.

 

Go Koni or MCA.

 

I guess they are cheep for a reason.

Posted

New struts will need springs and bump stops to match, maybe strut tops too. Even koni struts need to be re-valved if you want to run decent spring rates ~350lbs. So $1k suspension not $1k?

The triangle strikes again!

400px-Project_Triangle.svg.png

Posted

I think this thred has escalated I bit to much.

I am only after a bit of track day fun two or 3 times a year

Nothing serious.

Maybe I will dial it back a bit and look in to munroe shocks 

Posted

Don't even think about Monroe Mick. I think Lurch was being sarcastic. I had them in my zed years ago and they lasted only 6 months.  After that they were totally shot.

 

I then changed them over to Koni Red which were excellent ($700 for all 4) but not externally adjustable. 

 

I now have the Tokico illuminas in mine which are externally adjustable and are pretty good.  You can get them off ebay in the US for way less than $1k.  You can come and see how they ride in my zed with Kings lows if you want.

Posted

My point was how far do you need to go with it? If you are doing struts you are going to want to do springs and maybe strut tops if they are old too. It's the little things that add up.

Posted

Don't even think about Monroe Mick. I think Lurch was being sarcastic. I had them in my zed years ago and they lasted only 6 months.  After that they were totally shot.

 

I then changed them over to Koni Red which were excellent ($700 for all 4) but not externally adjustable. 

 

I now have the Tokico illuminas in mine which are externally adjustable and are pretty good.  You can get them off ebay in the US for way less than $1k.  You can come and see how they ride in my zed with Kings lows if you want.

 

Thanx Roberto I will look them up

 

My point was how far do you need to go with it? If you are doing struts you are going to want to do springs and maybe strut tops if they are old too. It's the little things that add up.

 

At this stage it will be a road car that gets occasional track use

I plan to get a shit box r32 in the future I can turn in to a dedicated track car.

Something I can thrash and not care to much about it

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...