Jump to content

waxhead

Members
  • Posts

    533
  • Joined

  • Last visited

    Never

Everything posted by waxhead

  1. Well got into the car big time today Dash is out so i can get behind at the rust Well i will let the pics do the talking
  2. No thats not an aerox This is what an aerox looks like
  3. Thanks for that I was working on my engine today I checked the sump versus an rb30 one other than the bulge being at the other end the capacity etc are all the same. I finished the pick up and very happy with that Next thing is to check the pickup for leaks but i don't see it being an issue The Engine was sent off to be hot tanked today and hopefully will have it back on wednesday. ready to put back together next week Still unsure as to what oilpump to run but thats hardly an issue The panel beater is coming around tomorrow and he is going to spend a week on it, he believes he can get it finished with inside a week. Tomorrow I will remove the engine (l28) finally and get it on a crate so i can ship it off to the buyer.( thanks for your patience) So its all go at the moment, I have a few engine port jobs coming in as well so that will pay for the zg flares etc
  4. Yeah i race them and also build race engines for other people Go with a yamaha aerox Very reliable very good on gas
  5. Good idea use a 302 block and the 351 crank rods etc
  6. http://waxhead.mybrute.com ok so i am addictive as well as stupid
  7. Has anyone played this game its very addictive Maybe i have an addictive personality hahah
  8. Yeah its looks like it will be ok Im going to put new bearings and rings in it and call it done
  9. Got my rb30 off ebay It cost me a mere $20 , so its all stripped down and will be off to get hot tanked on monday Looking at the conrods you can see why there is no need to run forged rods in the rb30det engines
  10. Damn to slow I don't reckon you could build one for that price Good buying
  11. The tail light issue sounds very much like a bad earth to me
  12. I thought it was in sydney in 2011 Im working to get my 260z there for the next one
  13. Insane Glad every one is ok and car didnt end up going belly up on you
  14. Had another race day up at lakeside again today This is so much fun
  15. Yeah i looked at that It looks awesome but this was just easier
  16. Yeah thats a good point you could make sleeves to do that I wont be doing it myself but its a good idea if you wanted to do it I will get a set of arp studs and just leave it with that The head has 4 dowels in it
  17. Here is a downloadable pdf that will show the details on how to do it http://www.skyline-gtr.nl/RB30_DOHC_Guide.pdf
  18. Its the rb26 that uses the bigger studs and it thought I would have to change the rb30 block to fit the bigger studs but I spoke to rips about it he told me that his datsun race car uses the smaller studs on an rb26 head. If he can do this then im ok with running the smaller studs lol
  19. The answer is yes The head bolts on you have to relocate a tensioner and use a longer belt due to the block height but other then that your good to go If you use the variable cam timing head you have to do some block modifcation but its not hard But it means your zcar will do this if you want it to Which of course would be a very handy thing to be able to do
  20. If you decide to sell the mounts seperate. Then put me down for it.
  21. Sounds like a good system you are using I was thinking about na but then I thought ftw I want to make this thing scream Yeah what was I thinking about the rb26 Good thing oginal owner wants it back and they have oil coolers and intercoolers etc for me so money saved there I rung rips in new zealand today and he was saying they have a 550 hp rb30dett they built in 2003 still running around on the original engine with stock pistons So an easy 450 sounds good to me in the 260z, Im just hoping its enough
  22. Well I was going to go for an rb30dett but then I got offered the rb26 with all manifolds cheap so i went with that I liked the idea of having the same size engine, But now its rb30dett all the way. Im not sure how the body is going to handle the pain but i guess thats up to me and the boost gauge
  23. After speaking to a few people on the web as well as on the phone that have done the rb26 conversion they all seem to be having issues with sump modifcation. not the depth issue but more the pickup as the rb26 block isnt drilled or cast as far down in the oil gallery. So the logical and easiest option is to use the rb30 block and make an rb30dett. The blocks are about $200 for more capacity as well easier to convert. What was i thinking. So its rb26dett block up for sale and 26 head on the rb30. Gee i hope it has enough power Lucky I have already secured the rb25det gearbox.
  24. It looks like a 260z to me
  25. I think the big spoiler will give your car a real race look. Would look awesome for a track car, not so sure as a streeter
×
×
  • Create New...