zr240 Posted January 31, 2012 Posted January 31, 2012 Hi All Just about to put in an order for some bits and have a special offer on Aluminium race jack. This offer is limited to people who order before 11am tommorow (1st Feb) (as I need to place the order.) Spec as follows: Tool King – TJ1000AR – Aluminium Lightweight Trolley Jack Weighs only 11.5kg but can lift 1000KG This great trolley jack benefits from an extra low saddle and frame. It's rubber contact pad prevents damage to vehicles. The swivel castors and wide front roller make manoeuvring this trolley jack easy without sacrificing stability. The light weight aluminium construction and tough anodised finish helped make this one of the best selling trolley jacks. The lowest saddle height of any jack available so will fit under even Motorsport ride height cars. Will easily fit in your boot. Minimum saddle height is 80mm and will rise to 375mm. Retail is around $285 and up. I am doing them for $225 if you pre order before 11am tommorow!!!! Best to email me at autospares@bigpond.com.au or call (03) 9555 5551 Ash Quote
Michael Posted January 31, 2012 Posted January 31, 2012 Sign Me Up Buddy! Ill take one, Good timing as i just blew my Supercheap Banger, Can i pick it up on the Weekend? Cheaper Than Ebay http://www.ebay.com.au/itm/Aluminium-Lightweight-Trolley-Jack-Tool-King-TJ1000AR-/120829673184?pt=AU_Car_Parts_Accessories&hash=item1c22027ee0 Quote
dat2kman Posted January 31, 2012 Posted January 31, 2012 THAT is a good price! From someone who has gone through three of them, they dont take kindly to grit and dirt in the ram seals, it's just the design of them, it cant be helped! I got the tom tits, pulled two apart, and replaced the grit infested worn seals, work ok now, but not easy to do. Get this, at that price it's a ripper! Quote
zr240 Posted January 31, 2012 Author Posted January 31, 2012 Hi Michael, they have Australian standard cert as well so that should be better quality than the others Not sure if they will have arrived by the weekend. Will let you know but most likely early next week. Ash Quote
C.A.R. Posted January 31, 2012 Posted January 31, 2012 I'll take one - I've left a msg on ya phone.. Quote
Michael Posted January 31, 2012 Posted January 31, 2012 No Worrys Buddy, Just Reply To my Email Or Message me if you still have my Mobile handy. When they Arrive. Thanks buddy Quote
Gordo Posted January 31, 2012 Posted January 31, 2012 Hi Ash, would be good for the Zed but would struggle to lift the GTR, lol. Quote
zr240 Posted January 31, 2012 Author Posted January 31, 2012 What's the gtr weigh? Would think it would lift the front or back. Just not both at once Ash Quote
Gordo Posted January 31, 2012 Posted January 31, 2012 Ash ,the GTR would be about 1550kg it would be fine. But I don't need one thanks anyway. It's a good buy though. Cheers. Quote
zr240 Posted January 31, 2012 Author Posted January 31, 2012 No problem gordo just thought your GTR must have put on weight over christmas lol Ash Quote
sco_aus Posted January 31, 2012 Posted January 31, 2012 I would, but I won't have the money for a couple of weeks and then have to get it to Canberra Quote
d3c0y Posted January 31, 2012 Posted January 31, 2012 How much is it to post one of these to QLD 4220? Quote
zr240 Posted February 1, 2012 Author Posted February 1, 2012 Postage would be around $40 (dont have one here to get exact price) Ash Quote
zr240 Posted February 3, 2012 Author Posted February 3, 2012 Jacks are in store. I order 2 extra if anyone wants to get in on the deal Let me know ASAP and I will put it aside. Ash Quote
mossy Posted February 3, 2012 Posted February 3, 2012 I'll take one Ash, I'll swing by next week to pick it up Quote
sco_aus Posted February 3, 2012 Posted February 3, 2012 Can I get the dimensions and weight so I can get a shipping quote? Quote
C.A.R. Posted February 3, 2012 Posted February 3, 2012 Tempted. Did you get a red one Ash? Farkin LOL'd!!! Quote
zr240 Posted May 1, 2012 Author Posted May 1, 2012 Got these jacks back in stock. They are a little more now as I could not get them at the original price. They are $239.00 inc GST (still cheaper than ebay by $16 ) Ash Quote
mossy Posted August 31, 2013 Posted August 31, 2013 Hi Ash whats the warranty on the jacks, I'm having problems with mine. Quote
dat2kman Posted August 31, 2013 Posted August 31, 2013 They are Chinese made, let me guess, the cylinder seals are weeping? With patience, you can quite easily dismantle, and replace the O rings with decent Viton O rings. I've rebuilt three of them. Biggest issue is lack f sealing the ram from ngress of dust and grit. Quote
zr240 Posted September 2, 2013 Author Posted September 2, 2013 I am pretty sure they have at least 12mths. Will check up when I get back to work tommorow. Is it leaking? As dat2kman suggests? Quote
mossy Posted September 6, 2013 Posted September 6, 2013 Sorry Ash missed this reply, as it was jacking up the car it just stopped and oil leaked out of the piston at the bottom. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.