WTB- NISMO extractor for L28

[240zed]

I am looking for a nismo extractor in any condition. the extractor with extended bolt on 2 to 1 collector

Cheers

[Roberto]

Like these ones?

 

http://www.nismoparts.com/catalog/?section=297

[DatPilot]

Stewart Wilkins Racing in Syd do make a special set of L6 extractors (you have to ask for them specifically, they arent on the web-site anymore)

Sometimes ther is a wait time, as they normally sell before they are delivered to the workshop!

They are race proven in many events, very well thought out....

 

[luvemfast]

Like these ones?

 

http://www.nismoparts.com/catalog/?section=297

What is the consensus on these?

If one were thinking of shipping one (or more) over........

[bullzed]

If one were thinking of shipping one (or more) over........

 

Hmmm... +1

[NZeder]

If one were thinking of shipping one (or more) over........

Last I heard they were not in stock and were waiting for resupply - that was months and months ago maybe even 12 months ago now. A number of racers here in NZ use that header with good results.

[luvemfast]

Last I heard they were not in stock and were waiting for resupply - that was months and months ago maybe even 12 months ago now. A number of racers here in NZ use that header with good results.

Thanks Mike. 

 

If I chase them up in the States, who's interested in a group buy?

I have a guy who can ship them over here.

I'll pick them up then send them off or guys can pick them up from me.

[benny]

they look pretty good and have to be better then our crap ones in AU for the same money.

[Riceburner]

I think Gordo got this style copied and made up by someone he knows. He Could be worth a try,  might be cheaper especially if you can produce the flanges simon.

[240zed]

Like these ones?

 

http://www.nismoparts.com/catalog/?section=297

 

Its not the one I am after. I am looking for is 6 to 2 to 1 that comes in 2 pieces.  2 pipes flanged approximately where the engine and g/box  with the collector to 1 pipe that is past the gear lever

 

I will ask Alan Stean if he has a photo.

[240zed]

The extractor Ben used on his car is similar but photo does not show the other piece of the extractor

http://www.viczcar.com/forum/index.php/topic,2043.0.html

 

Cheers

[NZeder]

The extractor Ben used on his car is similar but photo does not show the other piece of the extractor

http://www.viczcar.com/forum/index.php/topic,2043.0.html

 

Cheers

Then you are after one of the following

 

A Kakimoto Racing, Fujitsubo or Thrust  (no longer in business I think) header then as they a similar design to the one in the pic from Ben (in fact I assume Ben is one of these brands)

 

Hope you have deep pockets getting a unit out of Japan is not cheap.

[peter mc]

just use SW pipes they work and are very well made and there  2 peace flanged at the box

[acf321]

I can second Peter Mac.. I spent a year looking looking for extractors. Spoke to US NISMO and they are a 3 month wait at best, with no guarantees. Its like they are not interested in doing business, really!

 

I bought the SWR bespoke kit and its a very welll made thing in the right design you are after. Have a look at the photos on my Brown Hornet thread, which are pretty detailed.

 

Go with the locally made stuff, its very good.

 

 

[DatPilot]

author=acf321 link=topic=4168.msg98434#msg98434 date=1317442790

 

That post above has some pics....

 

Yummo

[luvemfast]

author=acf321 link=topic=4168.msg98434#msg98434 date=1317442790

 

That post above has some pics....

 

Yummo

[benny]

think he means this-

 

 

http://www.viczcar.com/forum/index.php/topic,4168.msg98434.html#msg98434

[luvemfast]

I've found the Nismo prts catalogue online.

Here is some info on headers

 

99996-E1141 ALL 1 6 into 2 race header for L-Series 6-cylinder, 1.625" primary diameter, chrome

plated; requires special header gasket.

99996-E1142 ALL 1 6 into 2 race header for L-Series 6-cylinder, 1.75" primary diameter, chrome

plated; requires special header gasket.

99996-E1143 ALL 1 6 into 2 race header for L-Series 6-cylinder, 1.625" primary diameter, unplated;

requires special header gasket.

99996-E1144 ALL 1 6 into 2 race header for L-Series 6-cylinder, 1.75" primary diameter, unplated;

requires special header gasket.

 

Full catalogue found here-

http://www.nissan4pa...s%20Catalog.pdf

 

[benny]

I've found the Nismo prts catalogue online.

Here is some info on headers

 

Full catalogue found here-

http://www.nissan4pa...s%20Catalog.pdf

 

 

 

Dont bother calling nissan au and quoting part numbers. These are NISMO USA parts and only available in the USA

[luvemfast]

 

Dont bother calling nissan au and quoting part numbers. These are NISMO USA parts and only available in the USA

Correct Benny boy 

[peter mc]

and  they will tell you they don't have any don't bother i have rang and emailed them so many times

[benny]

and  they will tell you they don't have any don't bother i have rang and emailed them so many times

 

 

are you refering to nissan au or usa??

[peter mc]

Ben the USA  iv tryed 6 different sets and there is only a small amount in the pipes there all about 27-32 in long and if you wont to play you will find more in the exhaust as a hole ..the SW pipes are within 2 hp of the best and if you tune the exhaust they make more thru the mid rpm than all the pipes iv tryed, if you have a strong L28 they are grate with a 3 in pipe

[240zed]

Thanks everyone, I will contact SW for a set like The Brown Hornet photos,

Cheers

Larry

[Roberto]

Good choice Larry.  I also tried to make contact with Nismo with no response at all.  That's pretty average customer service. I am glad to spend my $$ in Aus with people who actually value your business.